Tecra A8 - Mat * a DVD - RAM UJ-problem reading 841S

Similar Questions

• Tecra A8: Mat * un DVD - Ram UJ - 841 s is not read / burn any disc

  Hi all

  I have a laptop Tecra A8 with Mat * un DVD - Ram UJ - 841 s. This device is not read / burn any disc. However, Mat * one bed the recovery CD at startup.

  I tried everything: I deleted the registry entries (lower and upper), I uninstalled Ant again once the driver installed... but it doesn't work. Any help?

  Best regards

  Ribera.

  Hello

  In addition to the fact that you can boot from the Toshiba Recovery CD, I think that it s a problem of training material
  I think it's a matter of calibration of lens readers possibly the lens can not calibrate correctly in the right position of s, and this is why the drive can't handle the inserted media.

  This could be the worst case, because this fault is repairable by replacing the drive.

• Tecra A3 - Mat * un DVD - Ram uj-830 s

  I m having several issues related to the compatibility of this dvd recorder. I ve also heard in other forums on this problem. The controller firmware version is 5.1.2535.0, how can I solve it?
  There is no firmware available on the support toshiva page.
  Thanks for your help!

  Hi Gustavo,

  Can you give more information about the problems you are having with your DVD player please?

  Kind regards

• A50 DVD-RAM drive problem

  Hello
  When I try to burn at 8 x DVD-R, Nero says it can burn only at 2 x. It should normally 4 x.
  The drive is Mat * a DVD - RAM UJ - 820 s, FW version 1.0

  I think the update of the firmware should fix it, but I can't find it anywhere.

  Adrian

  Hi Ado,

  Checked other DVD - r writing? There could also be a problem with the middle (time of each manufacturer of DVD writer problem).

  Rudi Bye

• Satellite M55-S325 DVD write error (MAT * a DVD - RAM UJ-years 840)

  Hi all
  I have a Satellite M55-S325 with MAT * A DVD - RAM UJ-years 840 Firmware Version 1.52 I bought States 5 months ago, everything seemed fine until a few weeks ago when I tried to write some data DVD, I had unrecoverable errors while writing the DVD using NERO 7 ULTRA EDITION, but now I get this messege all the time and I'm not able to write any DVD the disc seems to be well in CD writing. I tried to use recording SOUND now that comes with the laptop, no luck. I tried to reduce the size of the files, and try with lower write speeds but still no luck. I disabled burning CD of the Windows XP SP2 IMAPI burning service COM as well. I use a good quality DVD-R that worked fine before. I would appreciate your help because my HDD is almost full (but still 10 GB of free space) and I need to get a backup of my data.
  Here is the log of my last attempt in writing, file a NERO DVD:

  1C82-0010-8011-0000-1454-2737-5268

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

  NT-SPTI used
  Nero Version: 7.0.1.2
  Internal Version: 7, 0, 1, 2

  Recorder: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: TOSHIBA MK1032GAX atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD - RAM UJ-years 840 atapi Port 1 ID 0 DMA: on

  = CDRom-Device-map =.
  CARPET * a DVD - RAM UJ-years 840 D: CDRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 73400320 (0) bytes
  ShowDrvBufStat: 1
  BUFE: 0
  Physical memory: 502 MB (514480 KB)
  Free physical memory: 160MO (164772kB)
  Memory in use: 67%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  14.5.2006
  Compilation ISO
  15:18:55 #1 text 0 file Isodoc.cpp, line 6411
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: REAL
  Multisession: FALSE
  Burning mode: DAO
  Mode : 1
  : ISO 2 (31 characters)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  15:18:55 #2 Text 0 File ThreadedTransfer.cpp, Line 525
  ReadBuffer-Pipe got 262144KB of memory

  15:18:55 #3 text 0 file Reader.cpp, line 124
  Player running

  15:18:55 #4 text 0 file Writer.cpp, line 113
  Writer D: MAST * A DVD - RAM UJ-race years 840

  15:18:55 ISO9660GEN #5-11 file Geniso.cpp, line 3312
  First address writeable = 0 (0x00000000)

  15:18:56 #6 text 0 file Burncd.cpp, line 3302
  Turn on Disc-At-Once, using DVD media

  15:18:56 #7 Text 0 File DlgWaitCD.cpp, line 279
  Last possible write address on media: 2295103 (510:01.28, 4482 MB)
  Last address to be written: 2288159 (508:28.59, 4469 MB)

  15:18:56 #8 Text 0 File DlgWaitCD.cpp, line 291
  Write in overburning mode: No. (enabled: CD)

  15:18:56 #9 Text 0 File DlgWaitCD.cpp, line 2578
  Recorder: MAT * a DVD - RAM UJ-years 840, media type: DVD + R
  Disc manufacturer ID: MBIPG101, media Type of ID: R04, product revision number: 1
  Disc Application code: 0, extended information indicators: 3

  15:18:56 #10 Text 0 File DlgWaitCD.cpp, line 458
  > Protocol of DlgWaitCD activities:
  =========================================

  15:18:56 #11 text 0 file ThreadedTransferInterface.cpp, line 847
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 2288160 (2288160) original disc POS = #2288160 / 508:28.60
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288160 blocks [D: MAST * a DVD - RAM UJ-years 840]
  --------------------------------------------------------------

  15:18:56 #12 text 0 file ThreadedTransferInterface.cpp, line 1059
  Prepare recorder [D: MAST * a DVD - RAM UJ-years 840] for write in CUE-sheet-DAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Session closed, fixed disk
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 0 4686151680, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
  0 | Lead-in | 0 | 0x41. 0x00
  0 | 1. 0 | 0x41. 0x00
  0 | 1. 1. 0x41. 0x00
  2288160 | Lead-out | 1. 0x41. 0x00

  15:18:56 #13 text 0 file SCSIPassThrough.cpp, line 36
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  15:18:56 #14 phase 24 file dlgbrnst.cpp, line 1725
  Caching of files started

  15:18:56 #15 text 0 file Burncd.cpp, line 4132
  Cache writing successful.

  15:18:56 #16 phase 25 file dlgbrnst.cpp, line 1725
  Caching of files completed

  15:18:56 #17 phase 36 file dlgbrnst.cpp, line 1725
  Burn process started at 8 x (11 080 KB/s)

  15:18:56 #18 text 0 file ThreadedTransferInterface.cpp, line 2685
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  15:18:56 #19 text 0 file Cdrdrv.cpp, line 8411
  -A DVD structure: physical Format information (00 h).
  Layer: 0, address: 0 (0 h), AGID: 0; Length: 2050
  Book type: DVD + R (10), part Version: 1.0 x (1)
  Disc size: 120 mm, maximum speed: (h F)
  Number of layers: 1, track path: path of the parallel runway (PTP), layer Type: recordable
  Linear mass: 0,267 um/bit, track density: 0.74 um/track
  Starting the number of physical sector of data area: 30000 h (DVD-ROM, DVD-R /-RW, DVD + R / + RW)
  End number of physical sector of data area: 26053F h
  End sector number in layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
  There is no data in Burst cutting area (BCA)
  Disc Application code: 0 / 0 h
  Scope of Information indicators: 3 h
  Disc manufacturer ID: MBIPG101
  Media type ID: R04
  Product revision number: 1
  Number of bytes to use physical format information in ADIP up to byte 63:56
  Particular media [16.63]:
  00 00 03 4 42 49 50 47 - 31 30 31 52 30 34 01 38... MBIPG101R04.8
  23 54 37 12 02 42 6 02 - A8 6 B 15 15 0 B 0 B 08 08 #T7. BN... k...
  01-19-1 B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00...

  15:18:56 #20 text 0 file DVDPlusRW.cpp, line 666
  Begin to write his address to the LBA 0
  Mode high compatibility DVD: Yes

  15:20:47 #21 SPTI-1128 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1128)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Printing Code: 0x11
  Meaning of Qual: 0x00
  The CDB data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
  Sense area: 0xF1 00 03 00 00 00 00 0 a 00 00 00 00 11
  Buffer x05e50000: Len x 10000
  0 X 40 86 AB A0 6 B 93 01 4F 75 2 A 54 25 B7 F6 D3 E5
  0XA9 FC 97 DF 55 73 64 2 AA AF 96 7 D B8 4 C 7 C 66
  0XC1 9TH C1 FF FF 55 59 DB 08 65 CB 6 CA B9 0C HAS 2 B

  15:20:47 am #22 RDC-1128 file Writer.cpp, line 302
  Unrecoverable read error
  D: MAST * A DVD - RAM UJ-YEARS 840

  15:20:47 #23 text 0 file ThreadedTransfer.cpp, line 228
  all writers idle, stopping conversion

  15:20:54 #24 text 0 file ThreadedTransfer.cpp, line 222
  conversion idle, stopping reader

  15:20:57 #25 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #26 SPTI-1106 file SCSIPassThrough.cpp, line 323
  D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  The CDB data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

  15:20:57 #27 phase 127 file dlgbrnst.cpp, line 1725
  Generating borders high compatibility DVD

  15:20:57 #28 phase 129 file dlgbrnst.cpp, line 1725
  Production DVD borders completed successfully

  15:20:57 #29 phase 38 file dlgbrnst.cpp, line 1725
  Burn process failed at 8 x (11 080 KB/s)

  Existing drivers:
  File ' Drivers\CDRALW2K. SYS: Ver = 6.2.0.132, size = 24698 bytes, created 23/10/2003 04:15:02
  File ' Drivers\PXHELP20. SYS: Ver = 2.03.28a, size = 20640 bytes, created 05/31/2005 23:36:01 (Prassi/Veritas driver for win 2 K)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Hello

  I can't find any strange or mysterious messages in the log file.
  You suggested that the drive can burn CDs but not DVDs.
  The calibration lens dysfunction is sometimes responsible for these issues.
  Unfortunately, I have no solution for this problem. The replacement drive must resolve.
  The unit is fairly new in this case, you should ask for help ASP.

• Satellite M30X-134. A device that can replace the "Mat * a DVD - RAM UJ - 820 s'?

  Hello world.

  My laptop is still big, and I don't want to get a new one.
  The DVD combo 'Mat * a DVD - RAM UJ-820 s' is now defective! The nearest Toshiba Servicecenter said that there will be EIGHT HUNDRED DOLLARS and gave no other details or suggestions, but if I find cheaper that they will install it.

  Now Ive has been unable to find the UJ-820 's' but some stores online request for similar models (UJ-846 and UJ - 850 among others) replace it without complications and are like 10 times cheaper.
  If anyone knows exactly what we can replace the UJ-820 s (same characteristics)
  Please let me now, it will be highly appreciated.

  PS. I have the UJ-820 's' think theres also UJ-820 and UJ - 820D I do not know the difference, the manufacturer (panasonic) does anyway.
  My dear laptop is: Toshiba Satellite M30X-134 (PSA72E - 015022GR) (in German)

  Thanks in advance.
  Erika

  Hello

  You can use almost all mast * one car because readers have some major differences. Maybe we can do DVD-R and another can do more media, but if you just need a reader to write cd/dvd then you can catch a UJ-846 or something similar from the connectors and electronics are almost the same.

  Moreover, I know many after-sales Service of toshiba but $ 800? Please can you post which was the service centre. Thank you.

  Greetings and good weekend

• Qosmio G20 - Mat * a DVD - RAM UJ-845 s not recocnise no CD

  Hello

  My cd/dvd Mat * a DVD - RAM UJ-845 s not recocnise not insert CD.
  Can you help me please

  concerning

  Hello

  You mean that all possible CD and DVD is not readable?
  Hmm, sounds like a laser lens malfunctioning drives.

  There may be a chance; You can try to clean the lens of the laser drive s carefully using a set of cleaning.

  I have goggled and found a few sets that seem to be designed for such a procedure:
  Google for MAXELL CD345 CD Laser Lens Cleaner or Allsop - the lens CD Laser cleaner.

  Maybe that will help you make the drive works again.
  But if the reader will manage not CDs or DVDs even if the goal of s drive has been cleaned then I don't think that the replacement of readers might help you.

• Need firmware for Mat * a DVD - RAM UJ - 841S to make the region free

  Can someone help me as where to find a Firmware for Mat * a DVD - RAM UJ - 841-S, the,(MTFOPD-01170000-UN.exe) one i found is for another laptop.

  I need to be able to watch the region 1 and 2 because of me travel and the number of these two that I own.
  I have three options.
  1. install a new drive.
  2 use an external hard drive
  Firmware 3.

  The latest is the one I prefer.
  Can someone help me.

  Hello

  Sorry, but the firmware update will not remove the DVD region lock.
  The fact is that you can change 5 times this option, then the option is locked and it of not possible to change it.
  Unfortunately, there is nothing to see!

  If you wish, you can consult this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10828

• DVD writing error Mat * a DVD - RAM UJ-850 s on Satellite L30-113

  I have Toshiba Satellite L30-113 psl33 with Mat * a DVD - RAM UJ - 850 s. operating system is Windows XP SP2.

  This drive read and write CDs, play DVDs, but don't write DVD the last time.
  After inserting DVD the status of the device in 'My computer' change to 'DVD RAM' on 'CD RAM.
  After the attempt to write, the errors are "Gage power error" and "not full disk at a time.

  Writing at the beginning of the DVD is OK.

  In your opinion, is it soft or hard error?
  Must I update DVD-driver or the replacement of the DVD player?

  Hello

  > I need I update DVD-driver or the replacement of the DVD player?
  Usually the ODD driver is part of the Windows operating system.
  Windows uses the internal Microsoft driver that controls the ODD.

  In any case, the European driver Toshiba page contains a DVD - RAM driver. This driver gives you more support for your DVD RAM drive.
  I m not very good if it will help you, but try to reinstall and check if the drive will be CD - RAM DVD-RAM

  See you soon

• Satellite M30X and Mat * a dvd - ram uj-8205 burning problems

  I have Satellite M30x and Mat * one year dvd - ram uj-8205. On the beginning everythinks worked very well, but in the last months of 2-3 that it cannot reads some CD and have problems with CD burning
  I restarted the laptop with the recovery cd, but still the same problems. Before robooting, I used nero 6, thougth perhaps, this is the problem in nero, now using just Sonic record now accompanies the DVD.

  Please anybode help me?

  Hello

  How to help you if you don't mention what CD cannot be burned (original music CD, homes burned CDs, just specific producers, only some files are not readable). Give us more info on this issue.

  Check a little better, and if there is no success is perhaps the defective drive. It is well known that some CD (a cheaper) cannot be burned properly.

• Problem with Mat * a DVD - RAM on P30 - 145 drive

  Hi, I have a Toshiba P30-145 with a carpet * a DVD-RAM UJ - 831S Cd/DVD drive. I installed the version of Nero in my possession from my old computer, v.5.5.9.22, which seems to date back to 2002 c. Nero is not recognizing the carpet * one as a valid drive.

  Is it because my version of Nero is too old? I visited the Nero Web site and find a list of compatible drives, but unfortunately, while much of Mat * one disks appear, my version is not. Any ideas?

  Thank you!

  Duncan

  Hello

  I think you are already on the right track. Is there any availble upgrades for your Nero? Sometimes there are packages of fixes that also contains some data-burner.

  Pick up or use another version of the burning software.

  BR

  Tom

• Problem with Mat * a DVD - RAM UJ - 841S Satellite M70-165

  Hello

  I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
  After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.

  Then the CD/DVD unit can read the DVD-audio, CD, or movie, but when I open a DVD (DVD software) data it is said that "it is not possible to access the D:\". ». and some time "poblem whith I/O device. and the same problem that I have with some new cd (which were not burn)
  I have'nt try every thing. I come here to ask the question.

  Sorry for my bad English

  THX

  You can do the following: go to download drivers of Toshiba Europe site and check if there is an update of firmware for this specific player. If so, I strongly recommend you apply and check if it works.

  If the didn t of the firmware update worked later you assumed that the reader is defective and must be replaced.

  Welcome them

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• Re: Mat * a DVD - RAM UJ-850 s ATA - Satellite P

  Hello world

  My laptop - Satellite P 160 does not read and does not recognize my CD/DVD readers. In other words, it's like there is no such thing as "D".

  It seems a problem with the carpet * a DVD-RAM UJ-850 s ATA... or the driver of it. I'm not sure to be honest.

  I tried to find a driver for the carpet * a DVD-RAM UJ-850 s ATA, but I couldn't find it.

  Anyone help me, please?

  Thank you very much.

  MW13

  Hello

  First of all I must say that there is no such thing as the P160 Satellite
  Then perhaps you could post a right cell phone model.

  Secondly I recommend to follow this short statement to solve this;
  -go to Device Manager and remove the ODD (optical disc) of the list of devices
  -Then go to the registry and remove the
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -then restart the device and check how it works

  Good luck

• Satellite A135-S2386 - DVD - RAM drive problems

  Hi guys, I have a Toshiba Satellite A135-S2386.
  I had once repaired because it is over heated and died.

  One problem I noticed, the fool who fixed, he didn't put it back correctly, and the DVD player has been hot glued...
  I fixed in March, April. But I'm used to, I can anyway...

  However, there is a significant problem.
  Written DVD player and bed PERFECTLY well in windows, however it cannot not be detected in the BIOS or what not.
  As XPInstallation Windows, Vista install detects it but BIOS can't.

  Can I update the firmware of the DVD-RAM? It's years Panasonic UJ-840.
  Or I can update the BIOS of the machine itself?

  You can boot from the CD? If the boot of CD work, then the BIOS is to see it properly.

  You could try an update of the BIOS anyway, go to http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp