Tecra A8 - no wireless connection

Normally, I work through a network cable connected to my router. But today, I figured that my without wire was down, due to problems with another wireless device, so I switched wireless (say better that I took out the network cable and normally the computer should go wireless (in other words, the setting I made))

But this time, no connection. I first thought that my router has had a problem, but who turns out be a problem in the other wireless device that is easily fixed. So, I know that wireless should work fine.

In the past, I could pass between the cable and wireless without problem. As much as I'm sure that nothing is changed (at least by me and I'm the only one not working on my laptop).

When I check the radar of wireless lan my router is the most powerful and closest to the router (as it should because it is 1.5 meters from my laptop).
But every time I have to create a connection in the radar between my laptop and the router in the following dialog box appears: ConfigFree - sell another application is controlling the wireless card.

Can someone help me fix to correct this?

Hello!

This problem is caused if you have a program installed that controls the WLAN settings.

As Akuma said remove the utility from the Intel Wireless (not the driver). It would be the easiest way, then you should connect via a WLAN.

If you have problems make an update of the WLAN card driver.

Good bye

Tags: Toshiba

Similar Questions

  • Tecra 9100 - no wireless connection

    Can anyone help please?

    The wireless in the toolbar icon has a red x and will not let me connect even though I see my router.
    Can someone tell me how to solve this problem? I have Tecra 9100 with Windows XP SP3.
    Thank you

    Hello

    The icon in the toolbar with a red cross?

    Well buddy, have you checked if the WLan card is properly recognized in Device Manager?
    Usually a first step to clarify if the wireless card is ok or if something breaks down.
    In the device-> network card Manager, you should see the wireless network card.
    If there is a yellow exclamation point, then try to update the WLan driver.

    If the driver has been installed correctly and there is no yellow exclamation mark then the next step would be checking the settings of network connections.

    Check if the wireless network connection is enabled (Start button-> settings-> network connection)

    Check it out!

  • Tecra M5: Wireless connection is no longer working

    I have a new Toshiba Tecra M5. I originally put in place to connect to my WAP Home/office with no problems. After using it in a place where no WAP was available and making the home, wireless connection"is not available" and I can't do so.

    Additional information: I have two other systems connected to my WAP without any problem. I can connect the Toshiba to my home LAN via a cable without problems. I already rebooted the latest drivers and tried to re-establish a wireless connection completely new, without success.

    Any help would be appreciated. Thank you.

    Bob

    Hello

    Looks you used Notepad in 2 different WLANs.
    In my opinion, you should refresh the connection.
    Go to the properties of WLan, and select the wireless networks tab.

    Here, you can set the home WLAN on the preferred networks. This should be done if you have configured your WLan network as invisible. Also use the option View Wireless networks.
    If your home WLan is not in the list, then you need to add the SID of WLan.

    Usually the WAP encryption password must be redefined

  • Tecra A3: Wireless connection problem

    I reinstalled windows xp prof after my laptop crashed and lost files.
    Everything works except for the wireless connection, it is turned on, but windows will not see it?

    Any ideas? I tried to download different drivers from the driver from toshiba support page, but nothing has worked.

    Hello

    When the WLAN switch is set to ON, use the FN + F8 key combination to activate the WLAN adapter. After that do what you will be able to use the wireless network card.

    Wireless network card appears correctly in the Device Manager?

  • After new wifi card no wireless connection

    Hi, can all-in-one help me on this problem?

    in my tecra M 745 due youcef change a broken wifi card: the new material appears to be installed correctly, but when I return the laptop wireless connection has been configured in windows with a maximum range of 11 MB/s (a ' b') and keepes fall all the time (notmally 54 mb/s)
    When I want to set up using intel proset software, as I did before the repair (worked great), the program was empty, but the software was still in 'software': the helpdesk here said when the material is allright their work is done. they can set up but cost me a 100 euros/hour
    So, what went wrong? I think that the driver is correctly installed but intel proset does not work, why?
    should I update intel proset?
    Thanks in advance
    Dr. Weekx

    Hello Dr.

    If the wireless card is a new and correctly recognized and installed there not any problem at all. If there is a problem with the feature, it can be simply false connection configuration. Please don t be crazy about me, but installation and configuration of the Wi - Fi connection are two separate jobs. If you check the service for other stuff every step must be paid separately.

    As you know, the wireless connection can be configured using parameters of Windows or by a customer (in your case Intel one). If you want to use the software Intel configuration of Windows MUST be disabled.

    It will be nice that you give us a description of the good model laptop. Sorry, but Tecra M 745 is unclear to me. As far as I know, this is the processor identification and this processor is built in many models of different laptops.

    Good bye

  • Tecra M2 and wireless network - signal strength problem

    Need advice buying wireless kit.

    I have a DSL phone line connection and I am currently using a Speedtouch USB modem connected to my workstation down.

    I have a laptop Toshiba Tecra M2 with construction of wireless support. I want to be able to share the internet connection which comes in the workstation down. I guess that my options for the workstation are to use a DSL wireless modem to share the internet connection or to use a PCI card in my computer. I tried them both.

    I first tried to set up an infra mode network with the laptop using a LinksysWAG54G which was connected to the telephone line and a computer. But the problem with that I was t couldn't do accept the subnet mask that my ISP (Lixxus) provided 255.255.255.255 (PPoA). This modem has all the masks of SN in a dropdown list, but mine isn't in this list. I returned this modem.

    I tried then set up an adhoc network purchase buy a PCI Wireless card for my desktop, and internet connection sharing etc. on the workstation. However, while it worked, and I could see the desktop of my laptop, the problem has been the wireless range. The signal disappear when I wore the laptop in the back room on the first floor. It would have been a distance of 10 meters in a straight line between the laptop and desktop. There are walls two bricks and a floor between the two machines. It seemed hopeless, so I sent the PCI card.

    I'm not sure what to try next.

    Any suggestions that I could try next?

    Suggested hardware?

    Signal strength - could the problem be that the antenna in portable insufficient Tosh - it too small?

    Hello

    I have the same situation at home. The best solution for this is to use the wireless router. Here you have the possibility to connect several computers desktop or laptop. In this case the configuration of wireless connection is very easy and it works fine. I also use it at home and in front of my house with no problems.

  • Tecra A4 fluctuating wireless.

    I have a new Tecra A4 and a BT Voyager 2100 router.

    I had the router for some time and never had a problem using it with any products before, I have other laptops that connect to it and can use it without any problem.

    However my new A4 seems to have 'questions' to a clean boot, with no applications running, a ping to the router can fluctuate from 1 ms to expired and all points between. The speed of the network can also fluctuate from 54 Mbit/s to 1 Mbit/s and also often loses the connection.

    As I say, other devices with the same network configuration do not have this problem and the distance between the router doesn't seem to be a factor either, as happens in the same way in any room of the House. I've removed the other sources of interference, I tried to change the network type / speed / channel and the problem persists. Im not sure what else to try, can someone point me in the right direction please?

    Hello

    Is a wireless card disabled when you use Bluetooth? You can turn it off using the FN + F8 key combination. Disable the wireless connection while using Bluetooth. Maybe it helps.

  • Bluetooth wireless connection

    MacBookPro OSX El Capitan; Version 10.11. Retina display - MacBookPro connects to the printer HP C6150 help electrician with no problems. not then attempt to use the bluetooth connection.

    To a printer wireless connection works using old MacBook. Bluetooth connects to the mouse and works very well.

    Select the Bluetooth device-

    The computer icon shows - not connected

    Apple mouse - connected

    Hello analyst.1,

    Thank you for using communities of Apple Support.

    I understand that you can print from your MacBook Pro to your HP using Ethernet and wireless printer, but not via Bluetooth. I know how it is important to ensure that you can connect to your printer via Bluetooth. I'll be more than happy to help you with this.

    Use OS X El Capitan: Add or remove a printerand make sure you have the latest version of the software installed and printer connection instructions, specifically, this section:

    Add a Bluetooth printer

    1. Update your software: choose the Apple menu > App Store, click updates, and then install the listed software updates. Even if no updates appear, this ensures that OS X has the latest information on printing software you can download from Apple. If you don't do this, you see a message that software is not available when you connect your printer.

      If you have a printer AirPrint, you have no need to check the software updates.

    2. Prepare your printer: use the instructions that came with your printer to unpack the printer, install the ink or toner and add paper. Turn on the printer and make sure it is not the display of errors.

    3. Connect your printer: follow the instructions that came with your printer to make sure it is ready to connect through Bluetooth. You must also make sure to activate Bluetooth and set up the printer Bluetooth as a new device.

    After connecting your printer, if you see a message prompting you to download new software, be sure to download and install it. OS X will automatically use AirPrint if your printer supports.

    Have a great day!

  • How to configure a printer wireless connected to Time Capsule?

    I just bought a printer HP Color LaserJet Enterprise M577z MFP Flow. It has capabilities of wireless printing. So far, I was able to connect wirelessly to one of my MacBook Pro computers, but only by having the printer create an Ad - hoc network that allows up to 5 devices to connect to the printer. But that of not what I want because every computer should manually disconnect the Wi - Fi network, connect to the Ad hoc network, the print job and then reconnect to the Wi - Fi network whenever a print job is required. It is very difficult and frustrating.

    What I would like is striking is the printer act like a network printer by wireless connection to my Time Capsule. I can't connect the printer to the USB port of time Capsule because they are far away from each other, and I don't want to use cables throughout my place. But I have no idea on how to do it because I can't find this option in the menu of the writer or configuration of the United Nations the HP utility software.

    I hope someone here could help me, please. Thank you!

    I have an Epson printer, so some of my experiences may or may not apply.

    I also have a time Capsule, and my printer and Time Capsule are far apart.

    My current configuration looks exactly what you are looking for: a wireless network provided by Time Capsule than all my Apple devices to a wireless connection, and my printer connects to the same wireless network.

    When I first bought the Epson printer, I needed to connect it to the Capsule of time via a USB port.  This sounds as if it were true for you as well.  So, for this very short period. I moved the printer via the USB port next to the printer, the connected Time Capsule, made the setup and then the printer recognized my standard wireless network.  I've returned to steady state, which I use now, with the printer and the far (actually on different floors) Time Capsule.

  • 7520 HP loses the wireless connection. What can I do?

    I've seen lots of talk about HP products, loss of wireless connection.  I have the same problem with my 7520.  Initial Setup is perfect, but he began to lose the connection when it went into standby mode.  Someone at - it a solution?

    THERE IS A FAST SOLUTION!
    On April 18, 2014 (page 11 of this thread), I posted a quick solution. My HP7520 printer has worked on Netgear router WIFI 7550 flawless since then. I suggest you read this post.
    From long experience with HP, I found they have great hardware, but their software has always been dismal. The ultimate "fix" would be for HP address their failure of a software that allows to my difficulty in working.
    A single "tweak" in the router security settings wifi will do. The rest of settings changes other people have suggested are short lived (about an hour in most cases), while they don't be reconnected unless they restart everything. It makes sense because of what is happening.
    The single "twist" parameter should logically point HP programmers to where in the firmware, there is the problem. They listen to? And, really, it doesn't matter on all other settings printer and router. All mine are back to the default settings and it all still works very well.
    Go to a BBQ and stop wasting your time on this issue.
    Ken

  • wireless connectivity

    installed a wireless antenna external usb (ralink)

    everything worked fine

    disconnected the cable, the feed under the rug, reconnected

    All of a sudden the wireless disappeared

    even from the wireless receiver integrated

    tried a wireless thumb usb adapter small size

    the system recognized the adapter

    appear still no wireless connection

    in the following device manager/network adapters are listed

    Ralink 802.11n wireless LAN card

    map of Microsoft virtual wifi miniport

    realtex pcie fe family controller

    all are identified as working properly

    I need help, remedy the situation

    

    First of all, make your computer make and model and model of your wireless usb adapter.

    Then remove the said cable under the carpet... restart your router/access point and computer.

    Thirdly, check if the internal card now has a signal... plug in external usb and see if she gets a signal... run cable under carpet... Note all changes as you go through the following steps.

    Report back, come back here.

    Frank

  • Very limited wireless connection

    I have a HP Pavilion dv7 - 3153ca with a 64-bit windows system 7 and I'm only able to get a wireless connection when the laptop is very close to the modem. Once the laptop is moved, for example, to another floor of the House, the connection is lost and cannot be re established until I have the back next to the modem. He has no problem with the wired connection. This has happened while he was trying to pass my McAfee security provider, although I don't think this is the problem that my other laptop (a Dell) converted without this problem. The other laptop continues to maintain its connection Wireless throughout the House, so the router and the modem is not the issue. I downloaded and re-installed the adapter without modification. I have scanned the laptop and nothing is reported in the mess. Are there any ideas as to why the wireless connection works only when the laptop remains close to the modem? Thank you.

    It seems I may not have been very clear in my previous post.  I wanted to suggest was to reverse the connection of the antenna.  As mentioned in the thread I linked, the connections might have been reversed from what they should be from the factory.  If this is the case, then connect the antennas in a factory setting would not solve the problem.

    Have you tried to reverse the antennas?  If they are in the deformities, then this would fix it.  If they are in the right position, then the worst you would have (only in the deformities) would drop signal strength.

  • Portege 4000 - Installed W2K - wireless connection problem

    I installed W2K the Portege 4000. XP was too heavy a resource for this system.

    After you install the network driver wireless Cisco (3.5.13.0) of your Web site, I am unable to get a wireless connection. In XP this comes automatically with an icon. The network device switch that I also installed did not help.

    I have the following:

    Connection to the local network - ethernet

    2 - wireless LAN connection

    Although LAKE 2 is activated this still does not pick up wireless.

    Any ideas?

    Hello

    PUH Windows 2000 is an older system. I didn t forget not all parameters of WLan connection and so I googled a bit.

    and I found an interesting page and a brief description how to configure Wlan connection in W2k.

    Check this box:
    http://www.Yorktech.com/wireless/windows2000/configureW2k.htm

    Welcome them

  • Wireless connection on Portege R100

    I have a couple of portege R100. When you connect to my domain, using the wireless connection, the logon scripts fail to run the first time. If you log out, then log in again, the script will run without problem. Y at - it a fix for this problem?

    Hello

    Unfortunately have no proper explanation, but I guess that WLAN cannot be connected so fast that LAN and it may be the reason why the first logon fails. In my opinion it has nothing to do with the functionality of the device and this is just a feature of network.

    Maybe some WLAN expert can give you a good explanation.

    Good luck!

  • PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

    Hello
    Member of the Community/Forum

    Model name - laptop Hp Pavilion 15 (15-p001TX)
    Questions - Brodcomm 802.11n wireless adapter not Worming.

    Problems-
    I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.

    Problems are the following:-

    1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.

    to re work I need for wtich forcefully from the power button.

    2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.

    Here are the ways I've tried.

    1. that tick managent of power, I have UN ticked (from PROPERTIES)

    2. using the CMD, I reset

    3. I DID cofig automatic Wlan disable (and put it on startup)

    4. update the drivers to the latest Version.

    5 install the latest drivers from the HP website brodcomm or even other Web sites.

    No the above to help me out.

    3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.

    Please please suggest the Suggestion and the ways out sorting valueable.

    He's really frustrated now, I do not understand what are the ways to my wifi on working condition.

    Thank you

    Kind regards

    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Spoiler (Highlight to read)
    Aditya Rai
    Aditya Rai

    Hello @adityarai82,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

    Try to review these steps, offered by community member @Great-Christine-Tree:

    First of all, we have a step by step guide to guide you through the process of diagnosis here:
    Troubleshooting your wireless network and Internet access

    A second option is to try the following steps:
    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

    Source: fixes Common for wireless connectivity problems.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

Maybe you are looking for

  • To upgrade to LF162UA Pavilion G7-1073nr i5 i3

    What is the correct processor to the improvement of a HP Pavilion G7 Seral # [edited by Moderator] leave an i3 to an i5?  I Kow that I upgraded to an i7 canoe so an i5 would be nice. Thank you

  • Re: Satellite A200-23N - I need the program that displays the status of the battery

    Can someone help me? I need the program that shows me the status of the battery of the laptopMy laptop model is Satellite A200-23N.Please I need help!

  • Remove the folder scan MCE on G20

    I have a G20 with Media Center Edition and wonder why in my videos and my pictures in the media library, the first folder listed is "Epson Perfection 1200. This folder is empty and as such may either be read or deleted. I have an Epson Perfection 120

  • Laptop HP 15-g013dx not available 5 GHz wireless

    Hello I just bought a laptop HP 15-g013dx at Best Buy. They assured me that it's compatible 5 Ghz WiFi wireless.  But only the 2.4 router appears as an available connection. My wife's old iPad can access the 5 GHz. I am a tech dummy, so I don't know

  • Missing UBS port

    I have a laptop HP G-61. One of my work as a UBS port. I recently looked at the UBS port and they are absent.  My notebooks is still under warranty.  Had this laptop for a year now.  What must I do to fix this problem.