Tecra A8, WinXP SP2 - number with built-in speakers

Similar Questions

• His monitor with built-in speakers

  Hello
  I have an Optiquest Q7 monitor with built-in speakers.  I used to get a sound from the built-in speakers with my XP computer.  I recently upgraded to a computer with Vista 64 bit.  However, I no longer get sound through the built-in speakers.  I tried to sound in the control panel and disabled the exclusive mode in the Advanced Options tab.  Any thoughts on what may be the problem?
  Thanks in advance,
  Eco

  Hi EaswarS,

  Welcome to the Microsoft Answers site!

  First check if the internal PC speaker has by default.

  1. click on Start, type Sound in the search field and select Sound from the list when it becomes available

  2. check that the device audio speakers is set as the default device and is activated

  NOTE: If the audio peripheral speakers isn't in the list, right-click anywhere on the playback of the Audio window tab, then select options Show disconnected devices and Show disabled devices .

  3. If the sound from speakers option is disabled, right click on speakersand then select Activate .

  The sound should now be restored. If the device audio speakers still does not work properly, check if the audio device is enabled in the Device Manager.

  Step 2: Check if the audio device is enabled in the Device Manager

  If there is no sound from the speakers, follow the steps below to determine the State of the sound hardware in Device Manager.

  1. click on Start, type device in the search box, and then select Device Manager from the list.

  2. click on audio, video and game controllers to expand the list of audio devices installed on the computer.

  4. determine if the audio device in question is enabled or disabled.

  ·         If an arrow appears on the volume icon, the audio device is disabled. Go to the audio driver update.

  ·          If a down arrow is not displayed on the volume icon, the audio device is turned on. Go to verify that the audio device is enabled in the Device Manager.

  5. right click on the name of the audio device and then click Activate. If the problem persists, then follow step 6.

  6. right click on the device name, select Propertiesand then displays the message in the device status field. The device status field contains either:

  A message that contains most troubleshooting for your specific device information.

  Or

  A message indicating that the device is functioning properly.

  Step 3: Install an updated audio driver

  1. click on Start, type device in the search box, and then select Device Manager from the list.

  2. click on sound, video and game in the Device Manager window controllers.

  3. right click on the name of the audio device listed under sound, video and game controllersand then click Update driver software.

  You can also visit the manufacturer's Web site and download the latest 64 bit Vista compatible drivers.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Comments on the USB keyboard with built-in speakers

  Logic 10.0.5

  Casio CDP USB-120

  MacBook Pro

  OS X 10.11.5

  Mid-2010, 4GB

  When I running logic, and I turn on my keyboard that is connected through the USB port, I have notes very strong play in my speakers of digital pianos. Looks like octave A A-1 and A-0, if my middle C is C3.  It's not that exactly, but it's the closest, I can get to describe. Sometimes whenever I reached the record. It happens that one time and then slowly fades as if I cling to the sustain pedal. I looked through the Advanced preferences of logic, as well as the audio MIDI on my computer, however I don't really know what I'm looking for.

  If someone has had this problem and know how to fix it?

  First of all, if you're on OS X 10.11.5, must REALLY be run LPX 10.2.2 seriously.  Also update you driver/software Casio to a compatible version of El Capitan.  Maybe previous versions of LPX in El Capitan is not as stable.

  In regards to your urgent problem, I would look at the hardware keyboard, what are the parameters?  Logic is not send anything 'out' on the keyboard, unless you play something back.

• Where to find a download for KB2541763 for winxp SP2

  original title: as KB2541763 patch for winxp SP2

  I need to update IExplorer on a winxp SP2 system with an identical to KB2541763 task used to SP3systems. Is there an alternative solution upgrade to SP3?

  Hello

  Unfortunately, the patch KB2541763 are available for Windows XP Sp3, you must install Windows XP SP3 to download this hotfix.

  Step 1:

  Check out the link below to download the Windows XP Service Pack 3.

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  To learn more about Windows XP SP3, click the link below.

  Overview of Windows XP Service Pack 3

  http://www.Microsoft.com/download/en/details.aspx?ID=10767

  Step 2:

  Once you install Windows Service pack 3, you can download the update KB2541763 from the link provided below.

  Update for Windows XP (KB2541763)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26585

• PEAP EAP/TLS, PORTEGE with WinXP sp2 Tablet Edition problem

  We have: Rev AiroNet350 Cisco with WPA - EAP: Freeradius with EAP/TLS and PEAP, tablet PC PORTEGE with WinXP sp2 configuration.

  This problem discribed in http://wiki.freeradius.org/index.php/FAQ#PEAP_Doesn.27t_Work
  Perhaps to solve this problem we need a fix (http://support.microsoft.com/kb/885453/en-us), but microsoft support said to contact the laptop manufacturer.
  Can someone help me with this problem?

  Hmmm I m not an expert in this area, but it seems that the MS OS update is necessary. (I hope)
  The preinstalled Windows operating system is a simple OEM version and generally all updates should be possible. However, if MS guys told you to communicate with the manufacture of the laptop, you can contact the maintainer authorized Toshiba in your country for details.

  But I studied a bit on the net and found this site useful:
  http://SearchNetworking.TechTarget.com/originalContent/0, 289142, sid7_gci945257, 00.html

  1. 802. 1 X is based on communication between your router and a RADIUS authentication server. If you use WEP, WPA or WPA2 with dynamic keys, 802. 1 X debugging following tips may be useful:
  a. reintroduce the same RADIUS secret in your wireless router and the RADIUS server.
  b. configure your RADIUS server to accept the request of the RADIUS of the IP address of your router.
  c. use ping to check the accessibility of router-server.
  d. package watch LAN account to verify that RADIUS and answers queries are fluid.
  e. use an Analyzer like Ethereal Ethernet to watch RADIUS success/failure messages.
  f. for XP SP2, turn on Wzctrace.log by typing "command netsh ras set followed * activated.

  2 if RADIUS is flowing but are rejected requests for access, you may have a problem of incompatibility or credential X Extensible Authentication Protocol (EAP) 802.1. This setting depends on Type EAP. For example, if your RADIUS server requires EAP - TLS, then select 'Card chip or other certificate' of your adapter wireless network properties / authentication Panel. If your RADIUS server requires PEAP, then select "Protected EAP" of the adapter. If your RADIUS server requires EAP-TTLS, then you will need a third-party wireless like AEGIS or in Odyssey client.
  Make sure that this specific EAP properties match for your adapter and the server, including the server CA certificate root trust Server domain name (optional but must match when it is specified) and the customer (EAP-MSCHAPv2, EAP - GTC) authentication method. When you use PEAP, use the control panel to 'Configure' CHAP to prevent Windows from automatically re-use of your connection.

• A computer WinXP SP1 can be updated WinXP SP2 or SP3

  Windows xp service pack 1 recent recharge

  is no longer compatible with the windows update web site

  32

  dial the system

  You have a friend with a fast connection?

  If you haven't already done so, you will need to install the SP2 and SP3

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Windows XP Service Pack 2 - Download (for single PCs too)
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=en

  Are you ready for WinXP SP2?
  http://support.Microsoft.com/default.aspx?PR=WindowsXPSP2

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• I have an asus laptop with built-in bluetooth, but I can't perform simple tasks like connecting with another device like a helmet, for example.

  I have an asus laptop with built-in bluetooth. I hit the bluetooth button at the top near the power button, nothing happens and when I go to bluetooth menu manually, click bluetooth settings NOTHING product! All I want to do is sync my headset with my laptop! I did all the bases to find out the headphones, but my computer can't locate!

  Hello

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click the item
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE http://www.nirsoft.net/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My Tecra A11 - 11K new comes with w7-64 bit, but I need w7 32bits

  My Tecra A11 - 11K new comes with w7-64 bit, but I need w7 32-bit because of an old program that I use for professional use.

  I bougth a w7 32 and 64 b license.

  My question is how to install w7-32 more than 64. I think that it is as easy as plug-and - go CD. Yes?

  But I want to preserve utilities Toshiba, other programs that come with the w7-64 pre-installed. Where can I get them? The Toshiba Download Center?
  And which one I need? All the?

  Thank you for your help.

  > My question is how to install w7-32 more than 64. I think that it is as easy as plug-and - go CD. Yes?

  Do you mean that you have a Toshiba Recovery disk?

  If Yes, then it's like you said; put the recovery disk in the CD/DVD drive to start this disc and during the procedure, you will be asked which version you want to choose.
  Then choose 32-bit that s it ;)

• Tecra A2 - Display driver compatible with Windows 7?

  Hi all
  I've recently updated my Tecra A2 to Windows 7 (obviously without checking compatibility). It is working very well, but I can't find a driver (if it exists) for my graphics card. I've exhausted all over support of Toshiba and the forums pages, and I feel like the only solution is to buy a new card.

  Can anyone help?

  See you soon

  Hello

  I m asking you to install Windows 7 on older Tecra A2. Are not satisfied with the operating system preinstalled?

  Normally, you can get all the drivers on the Toshiba page. I checked and I can't find a driver for Windows 7 or Vista (most Vista drivers are also work on Windows 7). What can you do now? That's strange but as I know the Tecra A2 is equipped with an Intel card and you should check the Intel website for a pilot. Normally it should good one.
  Check it!

• How do I know if my system came with built in wifi

  I've never used wifi on my desktop computer. I was told that the new HP desktop computers came with built-in wifi and if it was in airplane mode, it wouldn't work. I tried to find this setting but to locate the search on my system. How can I find out this information to see if mine has built-in wifi.

  Hello

  The following link shows the specifications of your machine:

  http://support.HP.com/us-en/document/c03520552

  There is NOT a wireless. I didn't have ANY housing PCI or PCIe spare for a PCIe wireless card so an option that you can try to use something like the following:

  http://www.OfficeWorks.com.au/retail/products/technology/Networking/Wireless-USB-adapters

  Kind regards.

• How to record video clips of full 720 p with built in webcam?

  How can I save lot of 720 p clips with a built in webcam and built-in software?  I see that photo booth does, but it uses a weird square resolution. I want normal 720 p for youtube or other?  Is this possible with built in software? If so, how?  If not, are there free programs that will do the trick?  Thank you.

  The answer is here if anyone needs it:

  Re: How to capture 720 p webcam video?

• VISA Read Double Precision Corruption number with the 2400 Keithly

  I am confused on this point.  I have two systems with built in GPIB Controllers PXI.  Among the randomally systems began to show the behavior where the double precision read data returned orders gibberish.  On the other system, I use the same code and everything works.  Chain controls standard job very well (voltage value, current value, query set of voltage etc.).  I tried the following:

  Reset computer

  Keithly instruments exchanged (the problem follows the PC)

  Exchanged GPIB cables

  Update driver 488.2

  Used separate HS-USB-controller GPIB.

  I will be reinstall NI-VISA as well.

  The only difference is that I installed a few other drivers LeCroy instrument to the failed system.  But the problem is a not deliver after I installed the drivers, it occurred during the performance of my code.

  Has anyone ever seen this before?  What could be other causes?

  The problem was with the Keithley, change the format of the data without my knowledge.

• I would like to ask what is the official number of built for windows 7 tnx

  I would like to ask what is the official number of built for windows 7 tnx

  Hello Goka86, this is 7600. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Windows Update error 0 X 80244019 in WinXP SP2

  do a rebuild of my dual boot Win XP and Win7 system - must have a software that can be run on Windows XP.

  try to get updates, but the site 'Encountered a problem' and get the above error code.

  Can not use the fixit tool as it is to the SP2-tool requires SP3, which I'm moving to.

  Data sheet:

  WinXP SP2 32-bit on 200 GB drive HARD Sata2-partion

  IE8

  AMD Phenom II 4 x 2.51 GHz

  ASRock MB w / chipset Via

  4 GB of DDR2 ram

  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]