Tecra A9 - connection of two external monitors using Express Port Replicator

Hello

I have a Tecra A9 and Express Port Replicator.
I'm trying to connect 2 external displays, one connected to the output of the laptop and the other connected to the docking station (notebook lid closed, do not use the laptop screen).

I can't get to work, anyone know if this is possible?

Hello

I think you want to connect a VGA monitor and the other to DVI port.
Is this good?

Well, I found this doc:
http://APS2.toshiba-tro.de/KB0/TSB7B0201000CR01.htm

Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
The DVI port on the on the Port Replicator Port Express is supported only on computers with graphics card ATI or nVidia.
If you have a DVI INTEL graphics card port on the on the Express Port Replicator only is NOT supported.

Tags: Toshiba

Similar Questions

  • Tecra M11-LaTeX runs slow on external monitor using Express Port Replicator

    Hi all

    I am having trouble with my Tecra M11 with an external monitor, through an Express Port Replicator II.

    It is very accurate, but I am running texlive 2010 on my laptop to write a thesis. Whenever I use my laptop screen feature is very good, and it works very fast, no lag when I compile my document. As soon as docking it into my docking station at work to use it on a big screen, whenever I use the same program, it slows down a lot, finally causing the crash program. Its frustrating to lose a lot of your thesis like this! When I connect the external monitor directly to the laptop, it works fine again.

    Something goes wrong in the docking station. Anyone know how I can fix this? Im a little confused and ideas. Maybe I pilot or something im unaware of. My docking station is maybe defective?

    Thank you

    Jake

    Port replicator port on which do you use? VGA or DVI?

    It won't be easy to provide the answer to your question. It is not possible to test all the software available with docking station and research solutions.
    I would say: bad luck.

  • HP EliteBook 8440p does not connect to the external monitor using VGA! Help!

    As you can read by the title, this computer does not connect to an external monitor using VGA.

    It will be not just to record all monitors in the control panel.

    Can I change the resolution, change the color, etc.. But it will pick up any display.

    -This computer has a HDMI port.

    -The Windows key and pressing P make the ring of little blue loading appear for a microsecond before nothing appears.

    -VGA cable is brand new, double male, directly connected to my Panasonic Viera 32 ''.

    -In the properties of this computer is giving an error code that this computer has no drivers. (Code 28)

    After a repair, he says "device Base system has not a pilot.

    Can someone direct me to the corresponding pages for drivers or instructions? Any help would be appreciated.

    There is probably a combination of keys specific to your model that enables / disables the VGA port on and outside.  Look in high ranking a key with a marking saucy that some how is supposed to look like a monitor.

  • Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U

    Hi all

    I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.

    I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.

    I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.

    Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.

    Thank you

    Liga

    Hello

    I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
    Not 2 simultaneously.

    I could be wrong, and you should easily be able to check it out - use only 1 at a time.
    First, then the other.
    If the two works when used alone, then my suspicion is right.

    I hope this helps!

    TOm BR

  • Tecra M3: Failed to connect to the double monitors w / Advanced Port Replicator III

    I use a Tecra M3 I put it in place for an III Advanced Port Replicator and I can't dual display to work properly. I have a monitor connected to the DVI port and then another connected to the VGA port. It seems that the laptop is the 1 view and can get only one monitor to work. How can I get the two external monitors to work?

    Thank you
    MBorchardt

    Hello

    In my opinion, you can use a single external screen because you can choose between analog display, the TV and digital flat screen. As far as I know, you can use the FN + F5 keys to change between display devices and can only be set to an external TV or CRT and LCD monitor internal. But not to external displays.
    In addition, I propose to refer to External monitor in the manual which is preinstalled on this device.

    Good bye

  • Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

    Hello Forum;

    Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

    I need for my construction work 2 monitors.

    My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
    Some have said, that after a connection with the DVI - D VGA connector is turned off.

    Someone at - he experiences?

    On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
    This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

    This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

    Someone out there experimenting with this docking station?

    What would be the best way to work with two monitors + the computer screen?

    Thanks for all the good advice.

    Michael

    Hello

    As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
    So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

    The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
    The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.

  • Problems with an external monitor with the Port Replicator III and M100

    Hey all.

    I just returned from a trip where I took my laptop. Plugged into the Port Replicator port, started and everything was fine. Then after an hour or two, the monitor stopped receiving a signal. I repositioned the laptop and everything was good again. He then loses signal once again, and I was not able to get a signal via the port replicator since.

    The monitor works fine through the hole at the rear of the M100.

    I checked the pins on the Port Replicator port and portable, none folded and tried to clean any dust etc. Still no signal to the monitor.

    Someone has ideas of how to do to solve this problem?

    Jamo

    Hello

    The Toshiba 3 mobile extension is responsible for the good condition of the duplicator 3 market. Try to reinstall this utility and also check the page of the Toshiba driver for updates.

  • Lenovo ThinkPad X 1 carbon touch connects to two external monitors (1920 x 1080)

    I'll order Lenovo ThinkPad X 1 carbon Touch.

    I want to figure out a way to connect to 2 monitors (same model, 1920 x 1080)

    the laptop monitor could either be disabled or enabled.

    Q1) how about "Lenovo DisplayPort two-way cable DisplayPort?

    will there be any display lay?

    -the laptop monitor must turns off?

    My two monitors are VGA-HDMI/DVIonly supported. In this case, the installation would be

    x 1 button of carbon-> Lenovo DisplayPort to dual DisplayPort cable-> mini displayport to hdmi

    Q2), anyone tried this before?

    Q3) all other options?

    Thank you very much.

    X 1 carbon spec touch I'll order

    -Intel Core i7-3667U, 2.0 GHz, 4 MB L3, 1333 MHz FSB)

    -8GB 1600 MHz DDR3, 8 GB, 1 location

    -Intel HD Graphics 4000, 1 GB

    -Ethernet Via USB (included dongle), Intel Centrino Advanced N 6205 (a/g/n) Wireless Broadband Mobile option 3G / 4G (LTE), Bluetooth® 4.0

    -DVI via optional dongle, dongle included VGA, headphone/Microphone, Webcam video HD built-in, (1) USB 3.0 port, (1) USB 2.0 port, (Note: external to RAS access card reader and USB docking station must be ordered separately.)

    T1) for Displayport to Displayport splitter, you can keep the internal LCD screen. Given that the laptop considers external two monitors connected via the dispatcher as a simple external LCD.

    It would be easier for you to get just a Displayport to Dual DVI splitter.

    http://intrl.StarTech.com/AV/splitters/DisplayPort/DisplayPort-to-Dual-DVI-multi-monitor-adapter-MAL...

    It works on the same principle, but do the DVI out instead of the Displayport port on.

  • Can my XC-605 can connect to two external monitor.

    Hey, guys. Do you know if XC-605 can connect to the two monitor. One VGA and one DVI. I thank very you much in advance!

    If your model has a discrete video card installed, then the VGA port has been blocked with a plastic cover. The VGA port is not usable when add it on the graphics card is in place because the edge is off.

  • The two external monitors show the same screen

    original title: using 2 external monitors on a laptop using Dynadock U10 problems

    Hi guys,.

    I try to use two external monitors using my a Dynadock U10..., I bought because it says you can use two external monitors with it!

    I installed the drivers for Displaylink etc.

    I plugged both monitors to the Dynadock (one via the VGA input) and one through DVI. When I have my laptop open it using cell phone as main screen and extends the office to both monitors, but both monitors have the same screen. If I identify screens, the laptop screen is 1 'and the monitors are the two 3'.

    If I close the laptop (I put the settings to not do anything if the lid is closed) and select my monitor as the main screen, they still both have the same image and the settins wont let me go to another screen. If I identify the screens, the two screens are developed under the number "1".

    I use Windows Vista. My laptop graphics card is "ATI Radeon 3100 Graphics"

    Any help would be appreciated!

    See you soon,.

    Stu

    Your video card is not serious with this home solution 'USB '.

    Toshiba is your point of contact.

    However - to answer your question - as much as I know you cannot do what you are trying to do.  You can use both outputs monitor, but the results you see are what you would expect.

  • Tecra A11 for PA3508E-PRP1 (Express Port Replicator)?

    The Express Port Replicator PA3508E PRP1 can be used with Tecra A11? Given all that I have read the answer would be no, or Advanced Port Replicator or Express Port Replicator II would be necessary. But the port replicators are very similar on the upper side (connectors). Perhaps it is an old item that no one it lists as compatible more precisely?

    is that you must use compatible devices only with laptop Tecra yout and according to specification for your Tecra A11, you can use Express Port Replicator II with PA3680E-1PRP part number.

    This port replicator is designed for latest Tecra and Portege laptop models.

  • Tecra Z50 - need to connect two external monitors

    I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

    Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

    * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

    Hello

    I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

    The RGB/VGA port supports analog signal.

    The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

    > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
    What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
    It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

  • Re: Can I connect two external monitors to my Tecra M7?

    I have a Tecra M7, I would put up two external monitors. I install one on the VGA port and one DVI port and I try to extend the monitor overall, but the only option I have is to an external monitor and the screen of the tablet itself.

    Anyone have any ideas on how to solve this problem?

    As far as I know that something like this is not possible. Graphics card can send the signal on a port only, VGA or DVI.
    If you want to use two external monitors, you need an external device, such as Toshiba Dynadock (docking station USB with VGA or DVI port). Using the docking station, you will have three monitors shown in display properties. We will be connected directly to the laptop and the second on this docking station.

  • Tecra A10 - 1LL - connection with the external monitor

    Hello

    I have a problem with my laptop Tecra A10.

    When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

    My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

    Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

    Hi SilverWizard,

    What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

    As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    It's working now?

  • Tecra A9 and express port replicator - two external monitors

    Hello

    I have a Toshiba Tecra A9 laptop and a Toshiba express port replicator, the Replicator has two outputs DVI & VGA, but I just can't seam to allow them both to use my funds rather than 1 desktop computer screens and the screen of the laptop.

    Is this possible?

    See you soon

    Ash.

    As far as I know that something like this is not possible. The video signal may not be spited and sent to two video output ports. If you want to use two external monitors, you need an additional video source as Toshiba Dynadock or another solution.

Maybe you are looking for

  • A key is damaged on my satellite M30x

    I have a X 30 M and the "s" on my keyboard key, is damaged, the black surface does not have the white support. Now, can I buy just this key or I have to buy all the keyboard? Thank you Chaves

  • Window mail / Security number

    I use Windows Mail to my mail house for years without any problem (via Cox).  Without change of setting and unexpectedly, I get security windows pop-up asking username and password (needed never prior) followed by this error message: account: 'House

  • HP deskjet 3522

    We bought this all-in-one printer in June. It works perfectly, when we put in place. About 3 weeks ago the screen stopped to show anything. The printer still prints of our laptops very well, but the screen is blank. I have done the troubleshooting ti

  • Q10 whatspp and viber blackBerry application

    Beings dearPlease could you help me with this problem?I tried to download the application for free international calls viber but without success.Second, the type of application whatspp aligns with my phone?Thank you for your kind assistance

  • Office home and student - is Picture Manager included?

    I purchased Microsoft Office Home and Student 2007.  Before I open and install it, is Manager of photo included?