Tecra A9 - network does not work after wake up from the sleep/hibernation mode

Similar Questions

• Satellite M70-394: WLan does not work after wake up from sleep mode

  Hi all...

  I have a problem with my WLan connection and hope that one of you may be able to help. From my computer is turned off, it is not a problem with the WIFI connection but if I put the computer to sleep by closing the lid and then restarting it from there the led lights up briefly to wi fi but then and is the only way I can connect via a cable.

  Any suggestion would be appreciated gratefully.

  Hello

  What happen exactly when you open the lid? Generally, the WLAN light should be on and after 20 or 30 seconds, the WIFI network should work again.

  I recommend you to check the FN + F8 key combination to see if WIFI is always enabled. Alternatively, you can try to install the latest version of the WLAN driver.

• Z460, Ethernet does not work after wakes up after hibernation

  Hi, I used Ideapad Z460 for nearly 3 months. I have this problem. Ethernet does not work after wakes up to the top of hibernation. I have already updated the bios to the lates version (release date: 14/02/2011) but still this problem. Someone has an idea?

  Thanks for reading!

  try reinstalling power management, the default settings of the bios and also try this:

  Right click on my computer > manage > device management > network cards > select ethernet adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• Network does not work after Windows 2000 SP4 P2V

  It has been a roller coaster get this virtualized machine.

  A little history: this machine is Windows 2000 SP 4 with update Rollup 1. After you install the Update Rollup 1, virtualization tried it and it gets to 97% and then I get the message error "vmware agent has encountered an error. When I try to start the machine, I get a BSOD with error inaccessible_boot_device.

  After reading some discussions fo I found a solution of reconfiguing the virtual machine then it will start. So now, I have a virtual machine that will start.

  Now my problem is that networks do not work. I removed the network card, has added a new, tried static and dhcp, through the Add/Remove programs and uninstalled all the devices HP and Compaq, went into Device Manager and deleted all drivers HP and Compaq or component, rebooted countless times and I am still ending up with no network connectivity.

  The network card on the computer virtual says it is connected and he says is to receive, but not send. It is not pulling a DHCP address and a static address gets no where also.

  I have more than 50 virtual machines so I know this isn't a problem with my network, it must be on the virtual machine itself. I don't know what else to try, and I'm open to suggestions.

  Thank you!

  Have you tried to repair the winsock?

  1. Go in Start > run, type: netsh int ip reset c:\resetlog.txt

  2. Restart your computer and you're done.

  3. Follow the steps below if you have XP SP2 (this only works on windows XP SP2 and later versions).

  4. Go to regedit.

  5. Go to HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services

  6. Click on Winsock and Delete.

  7. Click on Winsock2 and Delete.

  8. Close registry.

  9. Restart your computer

  10. Access the properties of the LAN connection

  11. Click the install button in the Properties window

  12. Select PROTOCOL, and then click the Add button.

  13. Click the disk...

  14. Type C:\windows\inf\nettcpip.inf in the dialog box, and click OK.

  15. Choose from the list of INTERNET TCP/IP PROTOCOL in the list, and then click OK.

  16. Click CLOSE.

  17. Restart your computer. (At this point the Winsock is complete)
      not only avoid this problem from happening in the future, but also
      to make the process much easier you update Windows.)

  Try the following steps: http://support.microsoft.com/kb/837333

• BlackBerry phone Q10 (q10) does not work after a reset of the safety

  I did a wipe of security that yesterday since I can't make or receive calls, sms messages or anything of the these, cant access my list of contacts, camera or photos. I can't put even in air time so basically its just do nothing. Calls are on the list of calls from well miss that when I click on call, nothing happens and my screen does not show anything when the call is incoming that it sounds yet. I tried a full reboot, registering the phone and nothing works, when I click on an icon, nothing happens even on the tutorial icon and it also crashes network settings

  Try this... let the Q10 power, remove the battery AND the SIM card and the card holders (if present).

  Let the SIM card, insert the battery to reboot and see what all works or does not work.

  You are connected to a WiFi router?  Can you connect to one?

• hp photosmart 6515 software does not work after installation, click on the icons on the screen and nothing...

  I have a fairly (1 month) new HP Photosmart 6515e bought at Costco, replaced the ink installation cartridges with new ones at Costco and had to reinstall the software, but now it does not work. the icons are on the screen but when I click on the hand that resembles a printer, nothing happens, I have uninstalled/reinstalled several times nothing helps, have you tried the USB connection or Setup wireless, still no go, have an edition HP Pavilion p6267c running Windows 7 Professional 64-bit, 8 GB of ram all drivers updated. Help!

  Windows is the problem, I did a ton of googling and many people have the same problem with different printers, etc. I'm wasting my time here, please delete my profile, thank you.

• 3G network does not work after the iPad 2 upgrade to iOS 9.3.1!

  After much reminder of my camera, I decided to upgrade my iPad 2 to iOS 9.3.1

  Fact through my PC and iTunes.  Everything works well EXCEPT the 3G cellular network!

  I tried hot/cold reboot the device, we / off cellular data, the "airplane" mode, WiFi, etc, but does work ' t cell line 3G more...

  Name of the AFN is very good.

  Same question grit for a long time after a 8.x.x upgrade and has been resolved just get a next update.

  should I just wait for the next update?

  You have an idea?

  Thank you in advance?

  Italo B.

  It is a bug in 9.3 and persists in the 9.3.1

  to get back to be

  1. turn off the power, remove the sim card, reverse and insert sim card when asked. Or

  2 disable cellular data, mode airplane and then turn off. Wait about 30 seconds and then turn it on turn off the airplane mode and then turn on the cellular data. He must find it.

  but this is only a work around.  If you turn off again, you will have the same problem and her you need to repeat the steps above.

  Good luck

• Why the network does not work after update to ios10?

  I can't make and receive calls. In addition, I can't send and receive messages.

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  If this does not help, try here > If you can not connect to a cellular or cell - data Apple Support Network

• Tecra S3 - Wlan does not work after installing Win XP

  Hi all

  I recently bought a Tecra S3 PTS30E-0TL059GH without an operating system.
  I installed WIndows XP Professional.

  Everything works, except for the wireless LAN. I can turn on, but it doesn't seem to find the correct drivers.
  Device Manager indicates problems with the networkcontroller and two other unknown devices.

  I installed all the drivers on the toshiba site, but it still doesn't work.

  Any help is appreciated!

  Thank you!

  Hello

  I think that the laptop supports the INTEL 802.11 B/G WLan card, but I'm not 100% sure on this subject...

  In my opinion, you should try to identify the WLan module.
  How to do this?
  In this case, the use of the PCI database should be very useful.

  More details here:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  Knowing the exact specifications of WLan, is not a big deal to get the right driver.

• My vista windows Defender does not work after got rid of the virus Windows diagnosis. What can I do?

  It gives me an error code and says that my windows defender is stopped. Is it because I have installed Microsoft Security Essentials to help eliminate the virus. What should I do? I tried unistalling it and reinstall but it won't let me not just uninstall first. In addition, the virus has a sound, it does at the start and he is always on my computer when I start my computer. This means that the files are still on my computer?

  Hello

  That's right

  MSE stops at the vista version of windows defender

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  follow these steps to remove this malware that you think it's still there

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Keyboard does not work, after I login on the desktop.

  Original title: my keyboard appears in the devices, but must not work.i use the on-screen keyboard to type

  under devices it says it's working properly, but I can't type top .the keybord does not at all, he's dead.

  What happens when you try a different keyboard?

• Mail will not work after Migration Wizard from the old to the new iMac

  A Migration Wizard transfer everything what a processor Intel Core Duo 2007 19 "an i5 2012 27" iMac iMac.  Everything worked fine EXCEPT Mail.  She appeared a dialog box for each account of email asking for passwords. When passwords were seized said each was wrong or does not match.  It still works fine on the old iMac with the same entered password and turned down on the i5. Why is this and how can it be solved?  The old iMac has been sold, so I have TO get the i5 27 "of work. Any ideas or help that can be given is appreciated.

  Try this... In Messaging menu, choose Preferences > accounts > "enable this account" (top) and don't forget he is checked, if it is uncheck and save.

• Bug? : layers.add () does not work correctly when called from the menu (ID/CS6/Win7)

  Hello Devs,

  I am facing a mysterious problem with the layers.add () method.

  I am trying to create n number of layers for my document. So I decided to create a menu for that.

  I created two scripts

  1. for creating menu & menu action.

  2. real script that creates n number of layers.

  When I run the script #2 of ESTK directly it works fine.

  Now when I try to call the same script in the Menu it does work very well. Only the last layer is created.

  Script 1: LayerPopupMenuAction

  #target indesign
  #targetengine createLayerset
  var layerTemplateScript = File(File(getActiveScriptPath()).parent.fsName+"/IntializeTemplate.jsx"); 
  
  var initTemplateHandler = {
      'beforeDisplay' : function(ev)
          {
              ev.target.enabled = (app.documents.length>0);
          },
      'onInvoke' : function()
          {
              app.doScript(layerTemplateScript, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "Initialize Script");
          }
      };
  
  var layerMenuAction = app.scriptMenuActions.add("&Create Layer Set");
  
  for(var init_ev in initTemplateHandler) {
      layerMenuAction.eventListeners.add(init_ev, initTemplateHandler[init_ev]);
      }
  
  var refMenuItem = app.menus.item("$ID/LayerPanelPopup");
  refMenuItem.menuItems.add(layerMenuAction, LocationOptions.AFTER, refMenuItem.menuItems.item(2));
  
  function getActiveScriptPath() {
      // This function returns the path to the active script, even when running from ESTK
      try { 
          return app.activeScript; 
      } catch(e) { 
          return e.fileName; 
      }
  }
  

  Script 2: IntializeTemplate

  #target indesign
  if (app.documents.length == 0){
      alert("Please open a document and try again", "Document Error", true);
      exit();
      }
  
  var templateDoc = app.activeDocument;
  
  var layerNameArray = ["Fixed_Static_Assets", "Absolute_User_Assets", "Relative_User_Assets"];
  CreateLayers(layerNameArray);
  
  alert("Initialization Successful");
  
  
  //--------------------------------FUNCTIONS ARE DEFINED HERE--------------------------------
  function CreateLayers(LayerNameList){
      var layerListLength = LayerNameList.length;
      var layerObject;
      for (var ln=0; ln<layerListLength; ln++){
          layerObject = templateDoc.layers.itemByName(LayerNameList[ln]);
          if (layerObject.isValid==false){
              layerObject = templateDoc.layers.add({name:LayerNameList[ln]});
              //$.writeln('Layer Creation: ' + layerObject.isValid + ' for '+layerObject.name);
              }
          }
      //Merger Default Layer with the bottom layer:
      var defaultLayer = templateDoc.layers.itemByName("Layer 1");
      if(defaultLayer.isValid==true){
          //$.writeln('Default is Valid and will be merged with top most layer');
          layerObject.merge([defaultLayer]);
          }
      }
  

  Any help / advice on this topic will be useful.

  @Marijan Tompa [tomaxxi]: I googled for the solution and I noticed that you have already worked on the same type of script. Please help me if you can.

  Thank you

  Green4ever

  Hi Green4ever,

  I think at a first sight, UndoModes.FAST_ENTIRE_SCRIPT , who, as you may know, can scramble deeply the script steps, especially when one ... try statement catch is used.

  Try to replace FAST_ENTIRE_SCRIPT by ENTIRE_SCRIPT and tell us.

  @+

  Marc