Tecra A9 - protected password HDD data recovery

Similar Questions

• Password for data recovery key loss.

  I'm used to firefox sync, have a password to get into my firefox sync. When I had to wipe my computer and reinstall everything what I have first of all not a recovery key because I don't have a need yet.

  The good news is that I have firefox for android with my account. The bad news is that it does not give me a recovery key and three lines of 4-digit code does not work. Can someone help me solve this problem, so I do not lose all my data.

  If you have Firefox Sync on an Android device, then use this extension.

  • See the sync key: http://limpet.net/key/ (Android)

• Tecra A10 - 15 c: HDD REMOVAL of REQUIRED PASSWORD

  I have a laptop Tecra A10 - 15 ° c which has a Hitachi 250 GB hard drive.
  My client was 1st a password CMOS and here after a HARD drive on the HARD drive password.

  My problem is that the customer does not know what is the password for the HARD drive.
  We were able to remove the CMOS password but now we're stuck with the HARD drive password
  Does anyone know what software Toshiba use to place the security of password disk HARD low level

  I am looking for a removal tool.
  Thank you

  Hello

  You know the HARD drive password?
  If not, then you will be not able to get out this person would be able to remove the password disk HARD unknown. In this case, the HARD drive is useless and you would for a new born.

  PS; Here's a thread where you can find an instruction how to remove the known password HDD:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=219183

• Satellite L850: Drive HARD Firmware problem prevent data recovery

  Am a little confused and need a simple explanation
  My HDD L850 died under warranty and was sent to the people of data recovery to recover the data before entering new drive under warranty.

  I am told that my hard drive has a fairly unique combination of firmware and the drive that prevents the recovery until they get this firmware. Now 6 weeks after it happened I stll wait.

  Someone in support could explain to me in simple terms, why this firmware is the problem cause and so far can only be obtained by your partner data recovery company?

  Hello

  I think that you will here get a correct answer, why the people of data recovery needs of these packages since it is a user forum.

  But to my knowledge all the 2.5 hard drives and SSD drive supports various firmware.
  These firmware tells the hardware how to interact with the operating system.

  It seems that people in data recovery needs these packages in order to get access to the HARD drive, and I presume, without the compatible firmware, it is not possible to recover the data.

• Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

  Original title: cannot load Netflix movies in Media Center

  Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

  Hi Barbarasimonetti,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: You can follow the steps described in the article below

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Failure of hard drive on HP laptop DV 6000 Pavilion Windows XPsp3 OS - need help data recovery

  Failure of hard drive on HP laptop DV 6000 Pavilion - need help data recovery

  HP Pavilion DV 6108 NR, RG365UA, purchased late 2006 at best buy, with Windows XP, upgrade to Service Pack 3. It has a Fujitsu 60 GB HDD partitioned into C: and a D: Recovery.

  Windows tries to start, but goes to a blue screen with the message: "Unmountable Boot Volume" for a second, then just guard recycling until I force a shutdown.

  Phoenix BIOS, hard drive test result: "Fail #1-08".

  I ran a program to drive on the Cdrive analysis/recovery and it seems to show the directory structure intact, and he was able to recover some files. I used the free Seagate (which only retrieves the small files). The second pass only works so well and in the third set as the program says that I should not go further, and I need to contact a professional drive recovery company.

  However, drive D seems to be intact, so I wonder if the disc is damaged or just one aspect of the logical drive C is bad.

  How can I get the D: to run recovery on it software? The recovery discs, made by Best Buy, just proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
  Pressing the F10 key at startup bothers me nowhere. Ditto the key F11.

  I don't like hard disk; This is the data (files, documents, images, etc.) that I want to.
  I contacted HP to order recovery disks, but they are no longer available for my computer.

  Any suggestions would be greatly appreciated!
  Jon

  Update...

  I found a site that offers the following:

  http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-HP-model-number-dv6108nr.aspx

  Recovery Kit 435422-001 for HP model dv6108nr number

  

• Differences between POS and Vmware data recovery

  Hi, I wonder if vSphere5.1 has changed the name of recovering data vmware VMware Data Protection (WTP).

  I found that the download link illustrates the Vmware data recovery before vSphere5.0 and Vmware data protection after vSphere5.1.

  I think the same goes for Vmware recvoery data POS, but I want to confirm here.

  Hello

  You can find more information here: https://www.vmware.com/files/pdf/products/vsphere/VMware-vSphere-Data-Protection-Product-FAQ.pdf

  Replace protection data of vSphere VMware Data Recovery?

  Yes. vSphere Data Protection replaces the legacy VMware

  In vSphere data recovery function. vSphere Data Protection

  provides equivalent to VMware Data Recovery scalability with

  a stronger and more effective backup engine.

  Julien.

• 1.2.1 and vcenter 4.1 data recovery

  Hi all

  installation of data recovery, I can ping machine, I can connect the https, but when trying to connect VC to DR i've got invites to infinite (user password by default Administrator with login windows in vSphere). pwd is of course good... anyone know why?

  TNX

  Dan

  I found this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1018216

  Please consider my response as 'useful' or 'proper' marking

• Device data recovery - how to connect?

  What is the name of user and password for the device of data recovery? It does not do anything and I don't remember a set up when I created it.

  I try to enter, because I get the error 3498 or whether and recommendation of the forums is to make sure that the device can solve with ESX host names. I suppose to do that I need to go to the etc/hosts to add ESX host names to resolve, but I can't.

  I can not navigate to the https:// address of the device, which I assume is because it does not solve.

  Help, please.

  Login: root

  password:

  .. .iIs the name of user and password. Check the IP address you assinged to him (as appropriate). If this isn't the case, it might be using DHCP. You should see a command prompt to change the settings in the vSphere client or use the web interface.

• Corrupted data recovery water Iphone 6

  We know anyway to get data of an Iphone that does not turn on?

  I am desperate to get my photos from my broken phone and a loan to pay for it, but I do not know if everyone can do?

  The photos I want are not saved on icloud to bring from the phone itself are the only way.

  However, it was damaged more than a month there are water and did not put in operation since

  Thank you

  The bottom line is not. You can pay a ton of money for a service of data recovery, but it is useless with the encryption using the iOS and the iPhone with your data. All what they will recover is meaningless strings of gibberish, not files and with no way to decipher gibberish it's worthless.

  Sorry, but that the data is finished now.

• Impossible to get a HD data recovery to set up

  Due to my iMac HD dying, and my backup default HD before I could recover, I had to have the backup disk recovered to a (expensive) data recovery service. The HD, they gave me with the backup Time Machine recovered is in the format exFat. In the Terminal, I could see the following information about this. Disk utility, he sees, and the mount button is activated. But it will not rise. Any ideas?

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 5.0 disk1

  1: Microsoft Reserved 134,2 MB disk1s1

  2: Microsoft data base CASE3020 5.0 TB disk1s

  See if it mounts on a Windows PC.

• Slow response from phone to monitor data recovery

  hhaving problems with my app Apple Watch (watch OS 2.2) of the iPhone data recovery 6 (iOS 9.3.4). When I click on various watch apps - FaceBook Messenger, Messages, etc., they seem to take forever to recover data. I tried to restart watch it and iPhone without any improvement.

  If I remove the applications from the watch and then reinstall them this solves the problem for a short time.

  Ahy suggestions?

  Hello

  For best performance of your devices, make sure that both Bluetooth and Wi - Fi are enabled on your iPhone (and keep them permanently active).

  Also, make sure that you have installed the latest versions of all applications (on your iPhone: App Store > updates). To install updates for the associated Apple Watch applications also automatically, select automatic App install (on your iPhone, in the application of the watch, go to: Watch My > General > App Install).

  It can help to disable the twinning and re - pair your watch. The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code):

  • Cancel the twinning of your iPhone - Apple and Apple Watch Support
  • Set up your Apple Watch - Apple Support

  In the future, notes that new arrivals under watch OS 3 - software update that is should be out this fall / Fall - include much faster loading of your favorite applications, including applications to launch immediate up-to-date information.

  More information:

  http://www.Apple.com/Watchos-preview/

• What is the cable of data recovery?

  With my flame came a wire called 'data '. What is the difference with a normal Micro USB cable? Is it connected differently?

  I noticed that when I connect to my flame using a standard Micro USB cable, then it behaves funny. I saw him restart spontaneously, and also saw him plug and unplug several times. With the cable of data recovery, connections appear to be stable, but I wonder why. The Keon has worked well with a standard Micro USB cable.

  Hi Fekle,

  I'm not sure what the difference is in the cable of data recovery. For me, when I use this cable to recharge, my camera flame has strangely, sometimes requires me to remove the battery before restarting the unit.

  I had written to T2M asking how to use the wire and this was their response:

  Please follow the instruction below to rescue the phone.
  

  Firstly, we send a Recovery Cable with RED label with Flame phone, which is placed outside of Flame package. Please make sure that you have it.
  

  Secondly, please download Emergency rescue tool from http://cds.w5v8t3u9.hwcdn.net/Flame%20Rescue%20Tool.zip, unzip it, run Flame.exe and follow the attached PPT instruction to start the rescue.
  

  -Ralph

• SSD data recovery

  I spilled a glass of wine on the keyboard of my MAC BOOK PRO.  The SSD (1 TB) hard drive will not start.  I need to find a data recovery service to recover about 3 000 photos from disk.  Someone at - it services provider?

  SSD drives are not as recoverable as readers with magnetic rotating media. If the liquid got inside the car, maybe it's not recoverable.

  But the models of MacBook pro of 2015 should allow no liquids on the motherboard. He may not start for a much simpler problem aside, like a short circuit in the keyboard.

  If it were mine, I'd get another drive in an external enclosure and install Mac OS on it and see if YOUR files, (not more than 350,000 files comprising Mac OS) are recoverable. (The Mac can be installed on and boot from any drive appropriate, internal or external.)

• SSHD Toshiba MQ01ABD100H - Firmware / data recovery problem

  Hello!
  I have the mission critical data on a MQ01ABD100H of Toshiba to SSHD which was in a Sony VAIO for less than one year who decided to stop working from one day to the next. All I care about is the data. A professional data recovery company apparently reputable rated player, told me that it was a "mechanical failure", said they could recover the data and gave me a quote of $1500.00. A week later I was told something different; They said the platters and heads seem to agree and the problem seems to be on the circuit board and/or flash drive, and they didn't know how to recover the data. They told me that they have consulted Toshiba too. I asked them if they replaced the pcb Board and they would not tell me or answer questions more. I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  Here's what I know for sure; the bios of the machine of Sony VAIO Windows 8.1, correctly recognizes the drive. However, it does not start and is not accessible or recognized with cmd prompt Windows 8.1 UEFI options. The drive is not encrypted. After putting the reader into an external enclosure and its connection to another Win8.1 machine, the player starts with no extreme sounds of survey. Slowly, she clicks a few times as if the heads are looking, but then calms down and keeps running quietly. I have installed a Data Rescue PC3 software that recognizes the drive and its attributes correctly but can't read or clone. I have the Partition Wizard software mini tool, which recognizes the drive correctly, but shows the drive as being unreadable.

  That's what I'm trying to do. I'm looking for a donor on mine, with the same model drive, date, firmware, site, number of PCBS, hard drive code.

  Now, here is my unknowns and I appreciate everyone a preview with these. If I change the pcb edge myself, I need still more likely transfer the firmware for the new Board of Directors, even if I try it without doing it. I don't know where the firmware is stored, is there a rom chip or is it stored in the Flash Player. I'm not certain if, with this model of SSHD, if this can be done with replacement of the chip or the software? If it is stored on the Flash drive how is available independent of the HHD part? Must the reader Flash itself be harvested? But what happens if the flash player is bad, how can the firmware ever be recovered? Any ideas anyone? ... other than myself shot in the head, I'm kidding. I think that this may be a common problem that will often not resolved.

  I have the drive in my hands and am looking for options. I really believe that my data is recoverable if the trays are okay, right?

  I am not an expert but if applications cannot access the data and cannot read data from the SSHD then you will need professional help...

  I found the storage Toshiba page where you could get details on this SSHD
  http://Toshiba.SEMICON-storage.com/e...ient-sshd.html

  Mate good luck...