Tecra A9 - wireless problem

Similar Questions

• Tecra A5 Wireless LAN Driver XP

  Hello, I had to reinstall a laptop Tecra A5. The problem is that I would not find the Wlan Driver for WIN XP.
  Device Manager indicates that its Intel Pro / Wireless 2200BG Network Adapter.
  Serial number of the laptop is 16168071K

  Hope someone could help me

  Hello

  Here you can download the Intel PRO/Wireless 2200/2915 driver for this wireless network card
  http://APS.toshiba-tro.de/WLAN/?page=downloads

  If you have the Intel 2200 b/g wireless LAN card, the driver should work.

• WAG320N wireless problems

  I am having major problems with my Linksys WAG320N. Hoping someone here can help as I am quite clueless when it comes to networking.

  Without changing the settings, the other day that my Macbook Pro could not connect and he kept saying 'timeout '. From that point my iPhone also refused to sign, although access to the internet on my MBP viaethernet was fine.

  I did a hard reset according to the instructions of this forum, and then re-configured with the installation CD. The router wireless light was turned on but my MBP did not see the network. Finally, I managed to connect after I restarted my laptop and enjoyed every 10 minutes without internet connectivity before wireless problem network come fall and now does not appear in my list of networks once again, even if the wireless light is still on.

  Ethernet connection still works, but not via the wireless.

  I restarted my laptop and the router and tried switching channels on the router, all to nothing done. Very confused and frustrated!

  Someone at - it suggestions? Thanks in advance for any help.

  What is the wireless settings you have set up on your router (SSID, channel and security mode)?

  Connect to your router configuration page and click on the Wireless tab and click on the "Advance Wireless Settings" sub-tab and under change 75 beacon interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• T40 2374-PU3 wireless problems

  T40 2374-PU3 Wireless problems - I tried every driver and followed instructions to install several times.  I was able to install it successfully in the past (about a year), but do not remember with the version of the driver that I used.  Using WinXP SP2 - just installed.

  Help, please!

  Thank you!

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-42683

  After uploading, be sure to check out according to the instructions on the download page.

  I hope this helps.

• S10 - 3T wireless problem

  My rig to receive yesterday and fought wireless problems.  Thought, he was my network for some time and found if I close the 3 t of the network works fine.

  The 3 t at this point works well on the network but sometimes slow.  However any TIME that I try to download a file, it works as usual for a while then just dies.

  Stop downloading and it is surfing.  It seems also to kill or slow down the network to a crawl at the same time.

  I tried to update the drivers in Device Manager and it says they are the best already.

  Any thoughts?

  Thank you for your understanding.

  The ends of the ongoing saga I think.

  I went to Burger King this morning and connected to their hot spot and the thing that worked great - downloaded a large file on site.

  Lenovo, I called and they told me to uninstall the software Lenovo 5 ready.  I did and rebooted and it worked fine and still seems to work very well ;-)  They said that it causes conflicts.

  Worked on my unit anyway.  This happens on a platform of Asus here one year, their uninstalled software and it worked fine.

• Tecra M3 & Port Replicator III wireless problem

  I just bought a Tecra M3 and a port replicator III. When undocked the M3 connects to my WiFi without problem and remains connected. Once anchored it continues to have problems connecting, despite full status of the receiver and after connection bar / disconnect for a while he just gives up and says unable to connect. If I disconnect then it can connect ok. Someone at - it ideas. It can see the network fails to connect properly.

  Hello

  Very simple to solve, you must upgrade the driver Intel Wireless 2200 b/g Intel 9.0.2.25 card or higher.

  Good luck

• Tecra 9100 wireless network problem

  I'll have a chance by putting my Tecra 9100 with my home wireless network. The network seems to work very well. My other laptop connects to it without any problems and I can connect the Tecra with the ethernet cable. But the wireless connection, it cannot be successfully established by the Tecra.

  She claims to be connected, but he receives no package, and could get no internet connectivity. When I try to 'fix' the connection, it sits there for a while before telling me that the IP address may not be renewed.

  I managed to connect the Tecra to the network of the next door without penalty, which suggests that there is some kind of problem with our network interface. I tried to reproduce the exact settings from my other laptop, so I don't understand what the problem is.

  Any idea would be appreciated with gratitude!

  Hello

  It's really not easy to say what is happening here. The functionality of the laptop is ok and it's very confusing if it works with other local wireless networks.

  I recommend putting your access point to the factory without some specific parameters settings and try to connect it.

  Sorry, but I don? have another idea.

• Tecra M2 PTM20E Wireless problem.

  Hey

  I just bought this laptop that was used I installed very different drivers for the wireless, but none of them work. I also have a problem with the battery.

  I think there is a problem with the network card if yes is it difficult to replace?
  Thanks for any answers I've attached screenshots here below

  http://Tinypic.com/r/246883k/6 - network driver cannot click anything that nothing works

  http://i45.Tinypic.com/fdesya.jpg - problem battery sound in a foreign language, but it means windows can't find a driver for battery

  http://Tinypic.com/r/2vtnm7a/6 - no internet connection that you can see that the window is empty

  http://i49.Tinypic.com/bis86c.jpg - home edition everest showing the map as a one intelPro.

  Sorry for the foreign language: P

  One of the photos shows the network cards and it seems that your Tecra supports processors Intel 2200 802.11 B/G WLan card

  Go to Device Manager and check if the WLan Intel 2200 card is recognized.

  If it s not, install the driver WLan Intel (Intel PRO/Wireless 2200/2915) which can be found here:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

  the first photo shows only Intel ProSet is just and only the tool for configuring Intel Wlan driver and NOT so possibly the driver WLan is missing.

• Tecra M1 wireless connection problem

  Hello

  We have a kind of inherited a Tecra m1, we tried to use wireless to connect to the internet.

  First I tried with the sky, the laptop does not accept the digits of the password, it says it must be 13 characters etc, can add this info if you need it, so don't come in line with that at all. We tried to connect with my computer laptop girls and it works with his own, more I went through the process of verification of the modem with the sky, which was all fine and they said back to Toshiba.

  Then I tried the aol connection, with this is accepted my password and it shows it is connected to aol, wireless, but you can't get on the internet when you use Dr. connectivity, its said something on the browser settings, this is where I'm stuck!

  I can take notes tonight all the information required of the laptop to the Dominican Republic of connectivity, if anyone can help please...

  scorpiolfd

  Hello

  First of all, you must make sure that your WLan router is correctly configured.
  I put t know if you use a Mac address swim, but for the first time, you must disable it before you haven t establish the WiFi connection.

  Second, you must check you WLan encryption settings.
  If you use an encryption that is not supported by the wireless network adapter, then you will not be able to connect to the WLan router!

  So please check the type of encryption on the router and check if the WLan card supports this also!

  Usually it s advisable to disable all the security settings on the router, then test the WLan connection. If you will be able to connect to the internet, then you can activate all the security settings step by step

• Tecra A3: Wireless connection problem

  I reinstalled windows xp prof after my laptop crashed and lost files.
  Everything works except for the wireless connection, it is turned on, but windows will not see it?

  Any ideas? I tried to download different drivers from the driver from toshiba support page, but nothing has worked.

  Hello

  When the WLAN switch is set to ON, use the FN + F8 key combination to activate the WLAN adapter. After that do what you will be able to use the wireless network card.

  Wireless network card appears correctly in the Device Manager?

• Tecra A2 - mouse problems

  I have some problems with the external mouse on my tecra A2. The pointer seem to 'jump', sometimes across the screen, and it's pretty boring. I'm not sure of what the cause of the problem and still less what to do about it... The mouse is a Logitech optical mouse. I tried to change to a similar mouse but that did not help...
  What should I do?

  Hello

  Try disabling the touchpad through FN + F9. Did you try it with mouse just wireless? You can try it with the mouse that is connected with a cable?

  Sometimes I have the same problem, but it happens if the batteries are empty or if the mouse signal receiver is placed on the wrong place.

• Tecra S3 wireless driver not on the Toshiba site

  Hello

  Can you please help me to install my card wireless on Tecra S3? I can't find the driver on the drivers toshiba download page, but there is a software to configure the settings for it. I don't have the Toshiba rescue CD, and I really need to use faster internet from wireless to important emails.

  I see a "network controller" in yellow color Manager and I think it's my hardware wireless without the driver.

  Thank you.

  Florin.

  Hello

  To be honest I don t understand your problem. The site Web of Toshiba display drivers WLAN for Windows 2000 and Windows Vista.
  What OS do you have?

  If your OS is not listed, you must check the Toshiba WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

• Tecra M5: Wireless connection is no longer working

  I have a new Toshiba Tecra M5. I originally put in place to connect to my WAP Home/office with no problems. After using it in a place where no WAP was available and making the home, wireless connection"is not available" and I can't do so.

  Additional information: I have two other systems connected to my WAP without any problem. I can connect the Toshiba to my home LAN via a cable without problems. I already rebooted the latest drivers and tried to re-establish a wireless connection completely new, without success.

  Any help would be appreciated. Thank you.

  Bob

  Hello

  Looks you used Notepad in 2 different WLANs.
  In my opinion, you should refresh the connection.
  Go to the properties of WLan, and select the wireless networks tab.

  Here, you can set the home WLAN on the preferred networks. This should be done if you have configured your WLan network as invisible. Also use the option View Wireless networks.
  If your home WLan is not in the list, then you need to add the SID of WLan.

  Usually the WAP encryption password must be redefined

• ConfigFree - research on Tecra A3 wireless question

  Hi all

  I a laptop Tecra A3 with an installed integrated wireless card and works perfectly on wireless to router Dlink DI - 714 P + on my cable Telewest broadband connection.

  The problem is, when I try to run the
  Tool (Radar) wireless LAN serach, he informs me that the wireless device has been disabled and I need to set the switch on the front of the laptop.

  As I said, the connection and the hardware are all working well. The switch IS in the on position already, I use the link now, for posting this message.

  I tried to turn it off, and as expected, I lose all internet connectivity, so I turn it back on and voila, I'm online, but the tool still says it's off. Even the "doctor Conectivity" says that the switch is in the OFF position when it is not!

  Can someone help me to untangle what happened here please?

  Thank you very much

  Martin

  Hello

  Well, it's not easy to say why the ConfigFree utility gives you a wrong message.
  I found on the page of the Toshiba driver free V.5.00.45 of Config. Maybe you will solve this problem if you reinstall the utility. Trying to download the new version and install is again.

  Good bye

• Cannot connect Tecra 8200 wireless network

  I have an old laptop Tecra 8200, I recently bought a wireless router but I can't get the laptop to connect to it.
  He sees the network and attempts to connect to it, but after a few minutes it stops and returns looking for available wireless networks.
  The laptop uses windows XP with service pack 2.
  Everything on the laptop is standard and I did no improvement to him so there the standard network card. I don't know if this is the problem and that is that I'm not sure what network card enough.

  What card Wlan do you use?
  Check Wlan card details in the Device Manager.

  Looks a bit a problem of compatibility between the wireless network card and router.
  Please make sure that your wireless network card uses the same Wlan standard IE. 802 11 B G etc. as the Wlan router.

  What you could do is update the Wlan driver too.