Tecra M1 - Modem does not work (could not open a port)

I have a problem: after you have reinstalled Windows XP and on my Tecra M1 drivers, modem does not work. It can not diagnose himself - he always comes a warning: "cannot open a port (COM). It can be used by another device or application. I installed the latest Toshiba drivers for the modem, but nothing changes. How can I solve this problem? Looking forward for your advice!
Best regards.

Hello

Have you installed the drivers in the correct order? Not? So do it!
Have you installed the software or additional devices which could have a bad influence on the modem?
Check the status of the modem in Device Manager. You don't see any yellow exclamation?

Try to start the test on the modem within the operating system.
Check the operation of the Modem under
Start-> Control Panel-> phone and Modem Options-> Modems tab-> properties-> Diagnostics
by pressing the 'button interrogate Modem.

If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).
To change the regional setting please use the Toshiba Internal Modem region Select utility.

Tags: Toshiba

Similar Questions

  • VISA does not open COM port

    Hello, I made a simple VI which gets data from the PC com port.

    It works well on my desktop but today for the first time I ran it on my new laptop and it does not show the COM port. I see the COM port in Device Manager, but it does not appear in the drop-down list in my VI. Can someone please? I have attached my VI.

    Thank you

    You use a labview 2013? I had a similar problem and I had to install NI-VISA so that it displays. Not sure if you have installed that, but if not, then that should solve your problem.

  • Satellite A30, Win XP Pro SP3 - modem does not work

    Another problem with this laptop Satellite A30
    The built-in modem does not work.

    * Explanation: *.
    The driver is correct and downloaded from the Toshiba support site.
    The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

    When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

    I tried to change the com port of the modem to different numbers, but the problem is the same.
    I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

    This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
    Thank you
    S.

    Hello

    Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
    > It's strange, because I did it at least 2 other facilities on this machine pro win xp
    What other facilities?

  • Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

    My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
    It is shown as Toshiba Software Modem.

    I tried so many times it does not work properly.
    I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

    When I diagnose the modem via the properties of the modem without issues considered.
    Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
    I mean that he can call on a mobile phone or phone of the Earth.

    A few times he suddnely connects but connected sppedis 24kpbs.

    But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

    It seems that there is a fault on my modem 56 k.
    I tried even uninstall and reinstall, but the issue still exists.

    Can someone help me in this case?

    Hello

    I don t think that the modem would be malfunctions.
    Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

    I recommend you configure the modem again.
    In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
    Delete the existing profile and create a new!

    Best regards and good luck

  • Tecra M10 - Sound does not work on Windows XP SP3

    TECRA M10 sound does not work with Win XP SP3

    1. the drivers from the toshiba web site.
    2 chipset drivers and audio drivers were reinstalled no luck,.
    3. no mute FN + Esc
    4. feature eat that all drivers ok

    Hello

    If I understand your right all devices listed correctly in the Device Manager and you don t have yellow exclamation points?

    Normally, for high definition sound cards, you need two patches from Microsoft:
    KB835221 and KB888111.
    Normally, these patches are integrated into SP3 but it works only if you install the audio driver after SP3. So, if you have an older version of XP without SP3, you must update to SP3, all first and then install the display driver.

    So in your case, you must delete the current sound driver and restart the laptop. Then use CCleaner to clean the registry and system files. Reboot the laptop. Then download and install the driver of his newest Realtek Hompage.

    Good bye

  • HP Elitebook 8560p: Windows 10: Elitebook 8560p; WiFi button is not working, Wifi - and internal 3G modem does not work

    Mobile: HP Elitebook 8560p
    Bios: 68SCF worm. F.6.1
    Modem: AGERA Systems HDA Modem
    HP hs2340 HSPA + Mobile
    Network: Intel (R) (R) Centrino Advanced - N 6205
    Intel (R) 82579LM Gigabit Network Connection

    OS: Windows 10.0 (build 10240)

    I've updated HP Elitebook 8560p of Windows7 (64-bit) for Windows 10. The upgrade process was successful. Later, I noticed, Wifi and 3 G-internal modem does not work. Sametime, I noticed, that old HP Connection Manager has been uninstalled (or lost?).

    The problem is basically this: Wifi - and connections 3G internal modem does not work. I noticed, that wifi-button has "orange" color and the button does not work? I can't change the Wifi status parameters at the level of the OS of Off to On. That's why assume that the wifi module is on "off"-"State. I found the driver SP7107 (driver Wifi for Windows 10 button) package and I tried to install it. The installion failed because InstallDriver_64, location failed. (In Finnish language. Toiminto InstallDriver_64, may c:\...\WirelessbuttonDriver.inf' / installdrv/force). Is there an instruction manual to install the driver?

    I'm very confused and I don't know really, what is the first cause of the wifi - 3 g-modem internal questions and. I guess, this wifi button is not about root work.

    Can someone clarify why there are not more HP Connection Manager on Windows 10 and I tried to install, but install cancelled due to bad BONES. How can I manage wifi - and States of modem 3g without it?

    If anyone can help?

    A big thank you!

    Sip2sip

    Uninstall the access key and button wireless driver

    Reset

    Open Device Manager, run the dirver update

    shouldn't this go

    Download Connection Manager

    FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66235.exe

    Install the program in Compatibility Mode in Windows 7

  • Reinstalled vista now the modem does not work, says the modem is already in use. Modem does not appear in the material...

    Vista Basic with dial-up. I reinstalled vista and now the modem will not work with any of the numbers given by my provider. He throws error numbers (Sorry didn't write them) and said that the modem is already current usage or other computer is busy. The modem does not appear in the lists of material and reinstallation does not work. The computer does not recognize when a new modem is installed either. I use the same drivers provided with the computer when I got it.

    Hello

    I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

    It will be useful.

  • HP Pavilion a6838f: modem does not work

    original title: hp Pavilion a6838f

    I have windows vista 64 bit hp pavillion desktop

    This is the modem does not work, however, I have to be online to download updates of my software that I use in this regard.  Anyone know if it is possible to connect this with another desktop computer and download the software to the one with the modem and install it on the hp?  My manual says nothing about this.

    You need to set up a network with Internet connection sharing. http://www.windowsreference.com/windows-vista/step-by-step-internet-connection-sharing-ics-setup-in-vista/.

    Here's how to connect the computers using a crossover cable (which is the cheapest solution):http://windows.microsoft.com/en-US/windows-vista/Connect-two-computers-using-a-crossover-cable.

    Your computer without connection will actually have a connection to the other computer, then you can do what you need to do.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Satellite Pro A10 - Modem does not

    I recently reformatted my laptop using recovery discs. The internal modem does not work. It is recognized by the computer, but I get the message "the port that the modem is attacahed to could not be opened." This can be the result of a hardware conflict"when I query the modem in Device Manager. Also, in the Device Manager there is no indication of being recognized COM port. What can I do?

    Hello

    First I recommend you remove the modem from Device Manager, and then reinstall the modem driver.
    It is not necessary to assign any COM ports manually. After installation of the modem driver all have to be configured automatically. Do not forget that you are using the modem driver good for the country where you live.

  • Satellite A30-504 modem does not

    Hi all

    Old old old Satellite A30 504 my father had problems of modem for quite awhile. Here are the symptoms exposed:

    Modem is recognized as "TOSHIBA Software Modem AMR" and classified works correctly. However, when you query the modem, I get the following message:

    + The port that the modem is attached could not be opened. This can be the result of a hardware conflict. Check the Device Manager to verify that all devices are functional. +

    Settings of resources:
    Range of e/s-2400-24FF
    E/s series 2000-207F
    IRQ 7
    (I can't change any of these settings)

    Needless to say that the modem does not work.

    Has anyone ever met such a problem before? Does anyone know of a way to fix this? I really don't want to get a PCMCIA modem for this laptop, so any help would be greatly appreciated.

    Thank you in advance!

    Dan

    > I have reinstalled Windows XP twice
    How? Do you use the restore disc Toshiba for the installation of Windows XP Home edition?

  • my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

    You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

    Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

    Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

    Step 1

    VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

    Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

    Step 2

    When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

    /Library/LaunchDaemons

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

    There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

    Step 3

    In the LaunchDaemons folder, there may be one or more files with the name of this form:

    com Apple.something.plist

    When something is a random string, without the letters, different in each case.

    Note that the name consists of four words separated by dots. Typical examples are:

    com Apple.builins.plist

    com Apple.cereng.plist

    com Apple.nysgar.plist

    There may be one or more items with a name of the form:

    com.something.plist

    Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

    These names consist of three words separated by dots. Typical examples are:

    com.semifasciaUpd.plist

    com.ubuiling.plist

    Sometimes there are items (usually not more than one) with the name of this form:

    com.something .net - preferences.plist

    This name consists of four words (the third hyphen) separated by periods. Typical example:

    com.jangly .net - preferences.plist

    Drag all items in the basket. You may be prompted for administrator login password.

    Restart the computer and empty the trash.

    Examples of legitimate files located in the same folder:

    com.apple.FinalCutServer.fcsvr_ldsd.plist

    com Apple.Installer.osmessagetracing.plist

    com Apple.Qmaster.qmasterd.plist

    com Apple.aelwriter.plist

    com Apple.SERVERD.plist

    com Tether.plist

    The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

    Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

    If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

    If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

    Step 4

    Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

    ▹ Safari preferences... ▹ General

    and click on

    Set on the current Page

    If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

    The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

    Step 5

    The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

    Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

    Step 6

    This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

  • Portege R400-103 - 3 G internal modem does not

    Hello

    I have several problems with my 3g modem. Even if everything looks well installed, the modem does not respond. In addition the hibernation, sleep and shutdown cause in an accident.

    Portege R400-103
    -Windows 7 Professional

    * About sleep/wake extended/dhutting down: *.
    When I disable devices that are bound to the modem 3g, this all works, so my conclusion is that this has something to do with the 3g device.

    On the modem does not: *.
    When I go to the properties of the modem, and I ask for a diagnosis (modem to send information on the State of request) a box arrives with a message that the modem has failed. The modem worked, and frankly I don't know what crazy it has stopped working.

    Maybe you guys need more specific information. Please let me know.

    Any help appreciated.

    Hello

    Just a question at the beginning: is your laptop preinstalled with original OS that you got with your laptop Portege?

  • Tecra M5-103 does not recognize the 4 GB SD card

    Hi - my Tecra M5-103 does not recognize my 4 GB SD card, could someone tell me if this size chart is supported in this machine please?

    Thanks in advance

    Hello

    I didn't find any official information on SD compatible card sizes for this laptop but I think that card 1 GB and 2GB SD could run without any problem.

    The 4 GB SD card is definitely not supported.

    If you want to use these huge sizes of SD card, you could buy an external drive of All in.
    These devices are not expensive and you can connect and use via the USB interface.

  • All my work on usb processor does not open.

    USB

    All my work on usb processor does not open and the window instructions says it could have been changed or moved, but have not changed or moved files and folders become EmailXtender.  Please help find the files as important documents and letters are on usb.

    You must NEVER use Word to change the USB files as it is almost guaranteed to cause the corruption or loss of files.  Working on the files on a hard drive and then transfer it to USB.

  • Windows Mail does not open. It gives me a message saying, ' Windows Mail could not be started because MSOE. " DLL could not be loaded. »

    My Windows Mail does not open.  It gives me a message saying, ' Windows Mail could not be started because MSOE. " DLL could not be loaded. "How can I fix in order to regain access to my e-mail address?

    The only other thing I can suggest is to back up and then delete the following registry keys:

    HKEY_CURRENT_USER\Identities

    HKEY_CURRENT_USER\Software\Microsoft\Windows Mail

    I start with the first and then see if it works.  If this isn't the case, then delete them both.

    Steve

Maybe you are looking for

  • Impossible to import into itunes

    Used for 5 + years and never had a problem itunes import any CD until the last update of Windows 10. Have 3 CD purchased recently (even if not new versions) and all I get is imported CDA files, cannot convert MP3, wav, anything. Have searched the net

  • Computer of my computer fan runs constantly?

    My computer is a HP Pavilion dv4-1123us Entertainment Notebook Pc. whenever I use any program that increases computer around 40% CPU usage, the fan begins to operate constantly a little noise to very loud noise. I thought that its caused by a program

  • Scanning profiles will not be displayed - Mac OSX 10.5.8 - Photosmart Premium C309g-m [2D516B]

    Hello world I was wondering if someone could get an idea about this problem.  I can't use my driver 'HP StudioScan' because the 'profiles' will not load.  It goes like this: I opened StudioScan HP. A window opens that says: "none of the profiles cust

  • Move the icon

    Please let know us how to move the printer icon from desktop to the taskbar?  Thank you I did a right click of the mouse and couldn't find PIN to the taskbar, help please.

  • Help! Switching from my PC I have this strange message

    Switching from my PC I have this strange message: "this copy of Windows is not activated. In order to hold an appropriate license this copy must be enabled '... I'm a little dubious as I have had this PC with Windows XP for almost eternity.  Don't re