Tecra M10 - #1 IDE error after changing ODD

Similar Questions

• Tecra M10 - 10i: Abstract error caused by pwdbank.exe

  Tecra M10 - 10i, as random instances of the error message, 'Abstract error' box.
  Endless loop on the repeated screen boxes indefintitely.

  Kill pwdbank.exe process stops, it continues, but then the appliction Truesuite detects then password entry existing possibilities on the web pages for the finger printing software if pwdbank.exe killed.
  What happens on other models of laptops Toshiba with Truesuite running.

  The Truesuite application uninstall and install the new version of 2.5.28.0 (below) IS NOT the problem.

  Link: [http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?ID=66402&OSID=26&OSBUI LD = 6001 & OSBITSIZE = 32 & driverLanguage = 42 & SOURCE = TEMP RO & LNG = 1 & VERSION = V2.0]

  The problem seems to occur to me when I run Onenote 2007 - part of Microsoft office 2007

  Toshiba responds to this?

  Hello

  Maybe this can help - http://aps2.toshiba-tro.de/kb0/TSB9702NP0000R01.htm

  Good bye

• Satellite 1400: I get IDE-error after upgrade to the slimeline DVD - RW drive

  I have the laptop with a DVD-ROM above it. (Second hand and no manual)
  I have a DVD - RW Drive (SOSW - 852S) I would use.

  I can adapt without any problems.

  It freezes on the spot but for about 2 minutes and then it says IDE-error then it it boot XP.

  When I go into my computer there is no DVD player.
  Have I missed something when I put the disc?
  I can't? t get the BIOS to check it out.

  I tried most of the buttons for example F2.

  Hi David

  It s a clear case for all those who have a little experience with mobile technology.
  You must know that not every drive slimeline is compatible and supported with the device.
  The Player supports uneditable master / slave or c - salt settings.

  In your case, the laptop freezes 2 minutes because the BIOS trying to find STRANGE.
  This is not possible because of wrong settings and pops up the error IDE.

• Tecra A2: IDE error after firmware update #1

  I have a laptop tecra a-2 after installation of a new firmware for toshiba dvd rom sd-r2512 all I get this message when starting and the reader is unaccesible. What should I do?
  (I looked on, some guy was solved by changing the pins I am newbie I don't know what is a PIN y at - it another simple solution for this)

  Hello

  Where did you get the firmware?
  I guess you used is not not compatible or not supported in the firmware and this software has changed either the csel/slave/master settings or damage the player.
  This ide #1 error appears if the BIOS can not find the drive.
  This happens because of the wrong settings or corrupted disk.

  Unfortunately, I put t see chances to solve this problem. It seems that you damage the drive ;(

• Tecra A3 does not work after changing the power settings

  I changed my power settings in my tecra a3 laptop and now it does not start correctly. wants to start but just keeps going back to press F2 or F12 it please help.

  Hello
  where did you changed them? In the BIOS or in the Toshiba HW setup?

  I suggest you go into bios after turning on your machine. You have to hit just F2 Ant then in the search for bios for setting "all default setting" or something with "bios setup defaults" to reset your bios settings.

  After that, your computer should start up again.

  Welcome them

• error after changing inks

  Hi, I have a f228o all-in-one deskjet.  I changed the inks and all I get is error messages and an "E" on the screen. I tried other cartridges (new), it enabled or disabled, pulled the power cable and the USB cord. Still no joy. any ideas?

  See you soon

  K_B

  sorted now. the lid has not been closed properly generated the error message. fixed now.

  B_K

• 500 error after changing the application CF9 Server account

  Hello

  I changed the user account in my 9 of the ColdFusion Application Server Service.

  After restarting the service I get the following error on every page of my applications:

  java.lang.NullPointerException

  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:285)

  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)

  at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)

  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:320)

  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:428)

  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:266)

  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  I use CF9 Standard Edition and Windows Server 2008.

  concerning

  Claudia

  Hi Claudia,.

  Is the CF app as service account have permissions of file system to the CFM files on the disk?

  HTH, Carl.

• : 6000 #1 IDE ERROR after disk replacement

  Hi I have a couple of SP6000 and there a mounted DVD/CDRW (UJDA720 model number) who is unable to read the headlines, just hunting all the time that a disk is in the drive. I replaced the drive with 2 identical units called, but I get the message on the screen at startup, ERROR IDE #1. The laptop will then continue and has finished start, but the system is unable to see this player. I have tried both a UJDA720 and the updated version a little more recent, UJDA740 with the same results in two laptops.

  Replaceing the old drive in your laptop will result in no error at startup and the system can see the drive in the Panel, but cannot read the titles, although it will hunt in search of them.

  Any ideas as to the cause and the cure for this?

  Hello

  It seems that you have replaced the disc is not compatible.
  As far as I know most readers using a selected cable configuration. Your car has settings master or slave.
  Please check the label for more information that is placed on the disk
  Well well, to solve this massage you need a player compatible and taken in charge.

• Getting blue screen error after changing the registry system, how can I do a system restore

  Vista system was a repair to start and got stuck on 3/3

  I can't start windows or even in safe mode

  I do not have a backup of drive to back up either

  I tried to rename it in the registry, now I get the Blue error message on what ever I did in the registry

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• The console error after changing IP address

  Hi all

  I isntalled Server 2.0.0 on Win7 64 bit and everything went well

  Created a new guest and he saw in the window of remote console.

  I changed the IP address of the host and the host and now all I get when I go to the remote console is

  Error opening remote virtual machine < name of PC >: 8333\16:

  Unexplained error.

  The prompt works fine and I can rdp to it, I can't just create a remote console connection.

  I did a repair install and same problem

  I then did a uninstall and re-install and it still creates the same error.

  I have created a new guest in the hope that it was something to do with a sticky ip address, but the new guest was inaccessible as well.

  Y at - it an easy way to fix this or do I have to re - install windows?

  Thank you

  Mick

  Try this...

  http://amritbera.blogspot.com/2009/03/VMware-remote-console-unexplained-error.html

  The steps help?

• Tecra A8 (PTA83H) - strange error after software updates

  I downloaded the software upgrades and installed successfully. But if I run it, I get the message "error! The T.BIOS'CEO driver file is missing or damaged. The application leaves. "I just upgraded to BIOS 1.6 but software updates always generate the same error.

  Anyone who has received the same error message? Your suggestions will be appreciated.

  Thank you.

  AUNTIE

  Software updates of the term is quite general, and this is not easy to understand what you mean exactly. Do you have extra time with a little more info about update software?

  Good bye

• CS5 Configuration - same error after changing the permissions - still getting error

  I tried several attempts to install CS5 and get a configuration error... I've updated the permissions according to the instructions, but it still does not - please help?

  See that it always shows the problem with the licensing of which means this the same copy that has been stored from a backup.

  You need for permanent clean install.

  Uninstall program by going to---> Adobe installers utilities---> and uninstall it by clicking on uninstall of products programs.

• Tecra M10 - 17U use second HARD drive in the Bay of ODD

  Hello

  I try one of this popular box that allows me to put a second hard drive in the Bay optical slot, I use a Sata to Sata adapter, so there is not really an adapter and more properly connect:

  [http://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Enclosures&type_sub = 2.5%20Enclosure&model=AK-OA2SSA-BK]

  My problem is with the BIOS Toshiba waiting for a STRANGE device in this Sata port and cams out with a "CD" error, disable the Sata port.

  I have a workaround, if I start the PC, BIOS after with what this either in the Bay of the STRANGE, after Windows starts, I have insert the second HARD drive in the Bay of ODD, go to "Windows Device Manager" a 'check for changes on the hardware"and voila, the second HDD works fine , for me, it shows a limitation in the BIOS.

  Y at - it assistance, a Beta BIOS or something else, I have the latest BIOS 3.00 for this machine installed.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39412

  It seems that Tecra M10 does not support a select bay that would allow you to use a 2nd HDD rather than the ODD.
  As far as I know select bay is compatible with the Tecra M1, M2, M3, M4, M5, S1, S2

• Tecra M10 - GPS not taken in charge after the update of the WLAN driver

  Hi all

  I have a Tecra M10 with brod f3507g mobile modem. After Wireless manager driver update (suggested by TEMPRO) gps utility is not working: the error msg is "gps not supported!

  Of course before the driver update gps worked fine.

  Anybody experinced same problem?
  What can I do to fix this?

  Thank you

  Hi ouebgi,

  Have you ever tried to restore the old WLAN driver in Device Manager? There are a restore function for the previous version of the driver and you should try it!

• Tecra M10 - 1 H 4 - change shared video RAM worth?

  Hello

  I have a Tecra M10, with the standard 2 GB of RAM, I also added an extra 256 MB of available RAM slot. Can I change the value of RAM shared graphic? In the properties of XP Pro, I can see that it is fixed at 1024MB which is stupid because I only 2.25 GB in the machine.

  I can't locate any settings even in the BIOS, where I thought I could change it. It's a mobile graphics chip Intel GMA 4500MHD. Any help is appreciated...

  I also seem to get some horrible slow down on the laptop too, when I have about 10 different windows open, (be it the same application or different) when I switch to another window/application from time to time I have to wait for the laptop to redraw the new window very slowly?

  I updated the driver too - claims I'm on: 6.14.10.4953

  See you soon

  TC

  Hey Buddy,

  No, you can change the video memory value of t. Everything will be controlled automatically and there is no value in the BIOS or the display driver where you can change it.

  Video RAM depends on the RAM you are using on your laptop. Increase system memory values for the available total graphics memory, decided video memory and shared system memory will be higher.

  So, to get more video RAM upgrade your laptop with more system RAM.