Tecra M10 - 12M - clicking noise and slight stutter

Similar Questions

• Satellite C850 - clicking noise and freezes at startup

  When I start my computer, I get a clicking sound as the morse code and my computer freezes until the noise stops. Initially, I had 8 Windows on the computer and had the problem then.

  I hated Windows 8 anyway so I removed and installed Windows 7 Home Premium, thinking this would eliminate the problem but it did not. When I had Windows installed 8 noise would start at random times, but in Windows 7, it seems to happen at the beginning upward.

  Clicks can go for 5 minutes to 20 minutes and it doesn't make a difference if I restart the computer. The mouse can still be moved, but there is no response when I click on something.

  Some have suggested it's from the hard disk, but it is deffinately by speakers.
  When I'm able to change the volume, the volume by clicking changes also.

  It's driving me crazy!
  Anyone have any ideas as to what is causing this problem?

  > Some have suggested it's from the hard disk, but it is certainly by the speakers.

  I thought that you intervene on the rattling from the HARD drive noise

  Start Notepad, press F2 and access the BIOS.
  The clicking noise is noticeable now?

  What happens when the headphones are plugged?

• How to generate a sound (tone) without clicking noise and how to select the left or right speaker

  Hi all

  I try to write write a VI that generates a pure sound of specific frequency and volume, and then sends this tone to a speaker or other (left or right) to be used to teach students about Audiology (hearing these tests may have taken where you hear a noise in one ear or the other).  I created a rather primitive VI to accomplish this, but I am plagued with a number of questions:

  (1) certain frequencies, but not all, the VI produces a rattling at the start and stop of the tone (I think this is related to repeat the configuration and the appeal of the material, but I do not know how to configure it in advance and avoid it - and why he created the clicking sound at all frequencies?).

  (2) at certain frequencies (14000 Hz and more), I do not hear the tone at all on my computer speakers (I still hear the click before and after, but I do not hear the tone.) I know what you might think, but no, this isn't a hearing loss from me :-)

  (3) I would like to be able to direct the tone selectively to the left or right speaker, but at the moment my VI only allows me to choose the 'number of channels' (who I presume "2ch" means left and right), but I don't know how selectively choose only one channel or another.

  Thank you for your helpful suggestions you can offer,

  Eric

  I put together a quick test and dirty without a ramp up and down (good thing for a State MC) as well as the name is not correct but my children are waiting... time for weekend

  I set the buffer to a quarter second, but however the "GUI" is not very sensitive...

• Check by clicking noise and BACKSPACE key on the keyboard does not work sometimes

  Also sometimes the ENTER key only, not work - I have to click on the built in mouse pad

  Hello

  1. don't you make changes to the computer before the show?

  2 is this USB keyboard or wireless?

  3. What is the brand and model of the computer, the mouse and keyboard?

  Please follow the steps below.

  Method 1:

  Please run the troubleshooter mentioned in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-keyboard-problems

  Method 2:

  Please, put the computer to boot and check if it works very well.

  Click on the link below. NOTE: After completing the troubleshooting steps, please reset the computer to start as usual (see the STEP 7 of the article mentioned below) http://support.microsoft.com/kb/929135

  Method 3:

  Please use the below mentioned link to update the keyboard and mouse drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Equium - hard drive makes clicking noises

  Hello, can someone please help?

  I think my laptop is in trouble, the hard disk (or I think it's the hard drive) is do a lot of clicking noises and my battery life is running down when the adapter is connected. It seems that run down when the drive made those rattling. When the power mode is energy-saving sometimes stops clicking and the battery life fills up again, but recently its been doing even in power saving mode.

  I'm moving all my files on an external hard drive, even though I have a lot of stuff on my lap top. I can't afford a new laptop

  Can someone help me please?

  Thank you

  Hey Buddy,

  How to help you without knowing your model mobile exact?

  Generally if the HARD drive makes clicking noises it s time to replace. Backup to an external drive has been a very good idea.

  And how you can lose the life of the battery if the AC adapter is plugged? I put t understand it.

• Difference between Tecra M10 and Tecra A10

  Dear forum
  The above says everything really.

  I see the two look identical, but one is smaller. These two models are different in other ways please.
  Ian

  Of course, the two laptops are different.
  There are different models Tecra A10 and there are different units Tecra M10.

  For example:
  Tecra * A10-13 b * supports Intel GM45 chipset and an Intel Core 2 Duo P8400 2.26 GHz CPU.

  Tecra * A10 - 1 2 * supports an Intel Core 2 Duo T9600 2.80 Ghz CPU Intel GM45 chipset

  You can find details of different laptop models left here:
  http://www.Toshiba.EU/discontinued-products/
  Then, you can compare all the pieces of hardware.

• Tecra M10 - noise emissions

  Hello

  I'm new to this forum and looking for solution for continuous sound from the laptop Tecra M10. I can't play all other sounds. She starts soon as startup the laptop, but can be cut after the start of the window. Not sure if this is hardware or software. I spent at least 7 hours trying to fix this, but without success. Thank you very much for reading the post and any help will be much appreciated.

  Kind regards

  Kay

  Hello

  Since when you noticed this problem?
  What is your laptop pre-installed with original OS that you got with your laptop?

  Have you tested the feature with the factory settings?
  Is this problem with the internal speakers or there is no sound if you are using the headset too?
  > I spent at least 7 hours trying to fix this, but without success.
  What have you tried already?

• Re: Tecra M10 stops down if it is locked and then login again (XP pro)!

  Hello

  A few weeks ago, I got a * Toshiba Tecra M10 * my company which I use as mobile office.
  I have downgraded to Windows XP pro, which was delivered with the M10.

  The laptop works fine except one question:
  * If I lock Windows using the < CTRL > + < alt > + < del > and then connect again, Windows stops! ?? *

  This does not happen if I turn on the laptop in the morning if I logon after the notbook has been powered on it works very well and does not stop is!

  Suspicion, what I can do to avoid this unwanted closure?

  Thanks a lot for your help!
  Concerning

  Sergeant

  I have never heard of this issue

  But I searched on the Toshiba site and I created this document which might be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB9102IN0000R01.htm

  Check it!

• Scan fingerprinting - and Tecra M10 notebook computer does not properly

  Hello

  We got a Tecra M10 notebook and its fingerprint reader is not working properly and I tried all kinds of things to make it work but not joy.

  Can I know how can I claim the warranty, and how to contact Toshiba service provider because I can't find the coordinates of the Toshiba warranty service?

  Don

  Hello Don

  Before contacting service install OS using Toshiba Recovery CD/DVDs. With digital fingerprints factory settings scan and preinstalled software should work correctly.

  Otherwise, you can contact the nearest Toshiba authorized service provider and ask for help. They check the functionality. Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck.

• Tecra M10 - CMOS battery is low and powers down and upwards automatically

  Toshiba TECRA M10 - 10W
  Model no PTMB1E-00P003EN

  This laptop was working fine last week and is only about 1 year.

  Now to the power he reports the CMOS battery is weak and penetrates into the configuration screen to set the date and time.

  Once this is done, it shuts down and no more automatically, but everything works the CPU fan to high speed, no attempt to start etc.

  If you press the power button with the fan running, it will be power downwards and upwards (while it is still connected to the power grid) and again to report a problem with the CMOS battery.

  Any ideas on what is wrong and what can be done to fix this?

  Hello

  First the CMOS battery can be charged while you let the connected AC/DC adapter, for example 24 hours a day. After that, the message CMOS battery shouldn't t appears more.
  Check this box!

  The power automatically power cycle on and off can represent a danger due to a hardware malfunction can you start in Windows or in fact that happen before?
  Maybe it s overheating and you need to clean the laptop using a jet of compressed air.

• Tecra M10 - 10F and 8 GB of RAM

  Hello NG,.

  Today, I bought a Toshiba Tecra M10-10th with RAM 2 x 4 GB modules. When I enter the BIOS - it shows 8 GB of RAM. I installed Windows Server 2008 Enterprise 64-bit and after installation of the tab system properties shows 8 GB of RAM, but the Task Manager and all other parameters (for example the pagefile is also only 4 GB in size) said I have only 4 GB of RAM.
  I installed all the drivers and actual patches from the homepage Toshiba - Device Manager displays a device as it is not installed or is unknown.

  What's wrong? Something else has the same experience? Opportunities to work with 8 GB of RAM on Windows Server 2008 64 bit?

  Thanks in advance

  Regards Marc Grote

  Hello

  AFAIK Vista 64bits acknowledged the full RAM after the installation of SP1.
  I put t know how it works on Windows Server 2008, but perhaps you will need also this MS.

  By the way; Maybe the Manager of tasks no indication that the value of RAM that is used and not the total RAM that is inserted

  However try to install a tool like Everest Home edition of analysis of material and check if what RAM value has been reported.

• Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

  Hello

  As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

  The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

  However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

  I tried to run this utility, and it does not detect the DVI monitor at all.
  http://www.entechtaiwan.com/util/moninfo.shtm

  I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

  Any ideas?

  Thank you very much
  Paul

  Hello paul

  Your Tecra M10 has DVI port?
  Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
  If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

• Display driver problems and clicking noise with Satellite C670D-11R

  Hi all

  my friend bought a Toshiba Satellite c670d-11r in Germany on a catalogue (Otto to be precise) with Windows 7 Home Premium installed on it.

  After a few months he brought to a computer store and a service in the city, he lives to do a fresh install of Windows. A day ago he came to visit me and complained about how slow it was and asked me to install Windows again and that's what I was doing.

  After installing that I asked him about the CD of drivers he has no idea where he is or if he even had one so I downloaded all the drivers on the site and installed on her laptop except the display driver.

  First I unpacked it in the Appdata path that has been predefined, but that he would not launch after extraction, so I gave in a path custom and tried to run "Installtb.exe" but still once nothing happened so I decided to run the 'Setup.exe', he began installing CCC and after installation, I checked "Dxdiag" but it doesn't always recognize not the GPU in the view tab as in the previous version of Windows, as a "Radeon HD 6320" but as a "Standard video card" I tried everyhing I could come with but nothing really helped, a little later, I noticed a rattling noise where I think the HARD drive should be (to the right of the touchpad) I thought that I broke something , but he said that he noticed that also a few weeks ago by clicking.

  I'll post the dxdiag log now if this will help.

  + System Information +.

  Time of this report: 25/02/2012, 19:19:19
  Computer name: ZLATKO-PC
  Operating system: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: Serbian (Latin) (regional setting: Serbian (Latin))
  System manufacturer: TOSHIBA
  System model: SATELLITE C670D-11R
  BIOS: BIOS Date: 01/07/11 16:44:54 worm: 04.06.04
  Processor: AMD E-450 APU with graphics Radeon (TM) HD (2 CPUs), ~1.6GHz
  Memory: 4096 MB RAM

  Additional information:
  I'm not an expert at this, I have no epiriance with ATI graphics cards and it's a 64 bit version of Windows, as suggested.

  Thank you in advance.

  + The message was edited: useless info has been removed.

  Hello

  In regards to the HARD drive clicking noise:
  It is nothing unusual can happen with some kind of discs hard I have a few hard drives (internal and external) of two hard drives produce a rattling sometimes noise, but the drive HARD running and working properly so I guess that its ok but nevertheless if possible, back up the data always

  Regarding the ATI driver:
  The laptop belongs to the PSC4AE series.
  Choose the series C670D PSC4AE in driver download Toshiba form European page pilot would show you the driver compatible v8.812.2.2.

  You must download and unzip the package first.
  Now you should see the file TCA0056800E.exe.
  This file must be decompressed too

  Now, go to Device Manager and select the graphics card.
  Here to choose install driver then the manual installation procedure. Now point to the folder where you have unzipped the display driver.
  AFAIK driver for Win 64 bit files are placed in the driver-> display folder
  Usually the Windows operating system must pick up the right files to install the driver

  That s it

• Satellite L850 and clicking noise

  Being a novice with computers I need some advice as to the operation of my new laptop, which is an update of my previous version (5 years)

  While using the computer there is a 'click' noise made by computer all few minutes.
  Is this his normal? If it's normal, causing the click?

  I have an older version of the Satellite laptop and he never does that sound.

  Hoping for some advice about this noise

  Hello

  Clicking noise can be created per HARD disk.
  In many cases its nothing unusual and could count on the HARD drive that is integrated.
  I have two laptops. one of the computer s portable HARD drive makes clicking but the device works well, and I didn't notice the big questions.

  However, it s recommended to backup the data always in case the HARD drive would be unexpected start to malfunction.

• 2335dn does not turn on and make clicking noise

  I have a 2335dn printer that does not turn on and makes a clicking noise up through the document feeder.  FYI, the scanner lock is not locked either.  The display does not illuminate, nor the printer begins to warm.  It is simply a constant clicking noise.  I don't know if there is an internal power supply or if she has been shot.  Y at - it may be a loose connection where the cable connects the document feeder at the bottom?  Appreciate any comment.

  Thank you

  Chris

  OK, so I opened up the printer and found a bad capacitor on the power supply.  After replacing the capacitor all starts perfectly.