Tecra M10 and Windows 7 64 - bit - fingerprint reader driver

Similar Questions

• Tecra P11 and Windows 7 32 bit - cannot load the WiFi

  Hello

  I have a Tecra P11 (PTSE3A-00T00K) which has been loaded with Windows XP, but sold with Windows 7. I have recently reinstalled Windows 7, but could not get WiFi to work. I had downloaded the Intel Wireless LAN driver, but the program doesn't seem to recognize WiFi. Bluetooth monitor and located only ConfigFree Bluetooth function, but can't seem to find the Wireless Lan drivers. The network tab is not present in Device Manager, and network controller is in other devices, but with a lock icon.

  How to make WiFi work?

  Thank you

  Exact specification for laptop is not known to me but as I can see on the download page there is also offered Atheros WLAN driver version 9.2.0.500.0.s3264 (for models Atheros).

  Have you tried to install this driver?

• Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  give me the link?

  I need the latest package driver.

  -Thank you

  Please use BC Assistant.

  

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows PowerShell 3.0 and Windows 7 [64 - Bit (x 64), {System32} and 32 - bit (x 86), {SysWOW64}] O.S.:

  Windows PowerShell 3.0 and Windows 7 [64 - Bit (x 64), {System32} and 32 - bit (x 86), {SysWOW64}] O.S.:

  (Originally titled: "Windows PowerShell 3.0:")

  1. run "C:\windows\System32\WindowsPowerShell\v1.0\powershell_ise.exe" is the title "Windows PowerShell ISE" which should be the 32-bit version;

  AND,

  2. run "C:\windows\sysWOW64\WindowsPowerShell\v1.0\powershell_ise.exe" has the title "Windows PowerShell ISE (x 86)" which should be 64-bit.

  BUT,

  3 does not (x 86) (x 64) and stand 32-bit for the 64-bit versions of programs?

  AND,

  4 menu of program "help" or "Windows PowerShell ISE" has an article "about".

  THUS,.

  5. Why are the titles indicating no 32/64-bit version correctly?

  AND,

  6. what version of bits of programs "Windows PowerShell ISE" am really run when I run 1 or 2 above?

  JPD

  Have a read of http://technet.microsoft.com/en-us/library/hh847733.aspx and http://technet.microsoft.com/en-us/library/hh847820.aspx and http://www.samlogic.net/articles/32-64-bit-windows-folder-x86-syswow64.htm I hope this can help. (assuming I've understood your question).

  Basically, the "System32" folder is for 64-bit files and the "SysWOW64" folder is for 32-bit files

• I have lenovo g560 laptop and Windows 7 64 bit, but my laptop computer webcam does not tell me how to use it

  I have lenovo g560 laptop and Windows 7 64 bit, but my laptop computer webcam does not tell me how to use it

  Help/support on the Lenovo support site or their forums, review its their webcam and so does not part of win7

• I need a PCI device to my Sony vaio model No. VPCEH1AFX and Windows 7 (64-bit).

  I have laptop Sony Vaio model # VPCEH1AFX and Windows 7 64 bit as my operationg system.

  I uninstalled the PCI Bus driver mistakenly, and now I'm disturbing to get this driver please provide me with the driver.

  PCI bus:

  Small ID:

  PCI\VEN_10EC & DEV_5209 & SUBSYS_908B104D & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_908B104D
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

   

   

  Try the Driver of Intel Management Engine Interface, or the Analyzer Extension of Firmware.

• No output hdmi for hpe 580t Windows 7 64 bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010

  Windows 7 64-bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010

  There is no realtek hdmi output in his choice.

  In its Panel:

  Speakers

  Headset

  Realtek Digital Output

  Pls help

  Hello detroithp, you could try going to this link and see if the information is what you need.

  This seems to be a common problem. The link shows the solution to this problem is for Vista,

  but it should be the same for Windows 7.

• I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  In general, when the desktop software uses Flash Player, it's because they're incorporating an Internet Explorer window in the application.  If you do not have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop app is not going to work.

  Then, launch Internet Explorer

  Go here: http://get.adobe.com/flashplayer/

  Follow the prompts and then relaunch the application after you have completed the installation in Internet Explorer.  I hope this sorts for you.

• Re: Tecra A9 and Windows 7 - error print digital 0xe7210005

  Hello

  I installed Windows 7 on my laptop Tecra A9 on a partition with a dual boot (Win XP, Win 7).

  Fingerprinting works fine on Windows XP and not under windows 7. I uninstalled the driver of fingerprints and re-installed but nothing changes. The Protector Suite Software (version 5.8.0.4024) return of UPEK a mistake (0xe7210005) said that he found no fingerprints on this computer.

  Someone has an idea?

  Thanks a lot for your answers.

  Kind regards

  Alain

  Until you have installed the fingerprint software you have installed all drivers as driver chipset, Manager of storage, trusted platform module-module and so on?

• Tecra M10 and Express Port Replicator, no DVI to Toshiba 20 "LCD output

  Hello

  As the bed of the subject line, I will put up a new Tecra M10 with the Express Port Replicator and monitor LCD Toshiba Tekbright 20 ".

  The system works on Windows XP, and the ordinary VGA connection on the port replicator works fine when connected to the external LCD.

  However, there seems to be no way to get the DVI interface on port replicator, working on the LCD.

  I tried to run this utility, and it does not detect the DVI monitor at all.
  http://www.entechtaiwan.com/util/moninfo.shtm

  I have updated graphics drivers Intel for XP, form the Web from Toshiba site and also have the latest version of the BIOS.

  Any ideas?

  Thank you very much
  Paul

  Hello paul

  Your Tecra M10 has DVI port?
  Replicator port is not some sort of converter and it will be just a loop through the signal directly from the laptop.
  If the computer laptop doesn t supports DVI output you cannot expect to get signal from the port replicator.

• Tecra P11 - No Windows 7 64-bit display driver on the Toshiba site

  Hello

  I just got a new laptop today and installed Windows 7 64-bit. Looking at the website of Toshiba (win 7 page) I discovered that there are no drivers listed for the P11. Given that my laptop came with a Windows 7 license I at least expect that Windows 7 drivers would be on the Page of the Toshiba Support. If someone could post a link that would be greatly appreciated.

  Thank you

  I ve checked page Australian support and drivers Win7 does not exist, yet.
  To be honest this Tecra is unknown to me, but if you have newer model laptop, I assume that all of the drivers, tools, and utilities will soon be available. There is no other connection.

  I m wondering you did not check the support page before you do a clean install.
  By the way: this license key, activations belongs to delivered version Win7 and you cannot use it for the installation of the operating system with the Microsoft installation disc.

• Difference between Tecra M10 and Tecra A10

  Dear forum
  The above says everything really.

  I see the two look identical, but one is smaller. These two models are different in other ways please.
  Ian

  Of course, the two laptops are different.
  There are different models Tecra A10 and there are different units Tecra M10.

  For example:
  Tecra * A10-13 b * supports Intel GM45 chipset and an Intel Core 2 Duo P8400 2.26 GHz CPU.

  Tecra * A10 - 1 2 * supports an Intel Core 2 Duo T9600 2.80 Ghz CPU Intel GM45 chipset

  You can find details of different laptop models left here:
  http://www.Toshiba.EU/discontinued-products/
  Then, you can compare all the pieces of hardware.