Tecra M10 compatible mSATA?

I have a Tecra M10 - 1KR (chipset GM45/GM47) and want to upgrade with a XM13 of a - DATA 60 GB (mSATA). There is a mini slot unter PCIe free keyboard, but unfortunately, I couldn't find any information if the motherboard accept the mSATA modules.

Cordially, Harald know.

I can't say with certainty if this mini PCI module would be compatible.
Always is the TECRA M10 is equipped with Intel GM45/GL40? Cantiga (G) MCH? North Bridge, Intel ICH9M as South Bridge and R5C847 as a controller of the card.

The two Mini-PCI card slots are used for 3G or Intel Turbo Memory and WLan
Some models support Intel Turbo Memory.
Intel Turbo Memory (Robson) PCI Express Mini Card slot 2 and also some models are equipped with a 3G PCI Express Mini Card type card in slot PCI Express Mini Card 2.

Tags: Toshiba

Similar Questions

  • Tecra M10 - 17U use second HARD drive in the Bay of ODD

    Hello

    I try one of this popular box that allows me to put a second hard drive in the Bay optical slot, I use a Sata to Sata adapter, so there is not really an adapter and more properly connect:

    [http://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Enclosures&type_sub = 2.5%20Enclosure&model=AK-OA2SSA-BK]

    My problem is with the BIOS Toshiba waiting for a STRANGE device in this Sata port and cams out with a "CD" error, disable the Sata port.

    I have a workaround, if I start the PC, BIOS after with what this either in the Bay of the STRANGE, after Windows starts, I have insert the second HARD drive in the Bay of ODD, go to "Windows Device Manager" a 'check for changes on the hardware"and voila, the second HDD works fine , for me, it shows a limitation in the BIOS.

    Y at - it assistance, a Beta BIOS or something else, I have the latest BIOS 3.00 for this machine installed.

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39412

    It seems that Tecra M10 does not support a select bay that would allow you to use a 2nd HDD rather than the ODD.
    As far as I know select bay is compatible with the Tecra M1, M2, M3, M4, M5, S1, S2

  • Tecra M10 - update of the BIOS says "this computer is not supported.

    Recently refurbished a M10 - 10I to reinstall the operating system. WinXP install at all so I try to update the BIOS as it seems quite old (V1.5). Most recent version (and is available) for this machine seems to be V3.0. Download and try to run the file "P0065V300" and get the message:

    Package for the TOSHIBA BIOS ver.3.3.0
    This computer is not supported

    What can I do? Its supposed to be for this model!

    Also, prefer a version of boot drive, but hey, I can use a version of Windows, assuming that it runs on Win7.

    Hello

    Tecra M10 - 10I belongs to the series of PTMB1E and according to the page of the Toshiba UE driver, BIOS v3.00 - WIN is the latest BIOS version which is available for this model.

    The BIOS update requires a few additional tools Toshiba as VAP (additional package for Win 7)

    If this driver isn't installed, the update of the BIOS would not work.

  • Tecra M10 - stuck - CTRL key question may be to do with the BIOS?

    Hello and thanks for reading.

    I recently changed my Tecra M10 to Windows 7 (from XP), and it quickly developed the dreaded question-button stuck CTRL This causes the keyboard behaves as if the CTRL key is pressed continuously. Sometimes reaching a key combination, or bring up the on-screen keyboard, temporarily solves the problem, but he returned.

    It seems to be a problem that many people have no simple solution. I watched each thread that I find and tried a lot of things to do with drivers etc without success.

    So first of all, if anyone knows a remedy that works for this particular machine, I would be very grateful to hear!

    Then, there are two things that I did not yet: updating the BIOS and turn off pinch zoom.

    I was watching the following BIOS update:

    http://www.Toshiba-Asia.com/SG/support/drivers/details/25244

    ... which is the version 3.00 and seem to be more recent. My version is 1.90.

    However, version 3.00 is labeled "for PTMB0 * ONLY. I don't know what that means or if it applies to me. Can anyone help? Should I install this BIOS?

    For the pinch zoom, I was informed that disable sometimes cures the problem CTRL - but I can't find any installation zoom pinch on the M10. I think he doesn't have any one. Is this fair?

    Thanks much for any help you can give.

    Hello

    > I was watching the next BIOS update. is the version 3.00, which seems to be most recent. My version is 1.90.

    There are different Tecra M10 models on the market.
    Check the labels at the bottom of the unit. There you should find numbers like for example PTMB0E-01K00LGR

    The first 6 characters are important: for example PTMB0E

    I guess that your laptop belongs to the series of Europeans.
    In this case, you should check the page of the Toshiba UE driver for a possible update of the BIOS.
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

    However, on the page of the Toshiba UE driver you will also find the BIOS for all European units Tecra M10 v3.0.

    Anyway, back to Ctrl + button question: guess what, you need to connect an external USB keyboard and must check how is the CTRL key.
    In case the USB keyboard would work properly, the internal keyboard CTRL key is assigned and you will need to replace the internal keyboard.

    PS: it would be possible that the "sticky keys" option has been activated. To disable this feature, you must press SHIFT 5 times in the line.

  • Need new cable supply for Tecra M10

    Hello. My Tecra M10 power cable has split (after only 4 years used). Can someone tell me the right product to order?

    I have more information if necessary.

    Kind regards

    Thomas

    Hi Thomas

    Do you need AC adapter or just cable that connects the adapter into a socket side and wall on the other hand?

  • Tecra M10 - 10z - 3 G does not work after installing Win 7

    Tecra M10 - 10z, I installed Windows 7 pro 64-bit
    Everything is correctly configured, but the 3G connection does not work: the message is "no network".
    with Windows XP is ok.

    I can't update the firmware or similar.

    Y at - there someone who can help me?

    TKS

    Hello

    To use the 3 G, you should first check whether the module G ericsson 3 has been successfully installed.
    Where there is a visible yellow exclamation point in Device Manager, the 3G driver must be reinstalled.
    I found on the page of the Toshiba UE driver:
    [Driver Win 7 3 G Ericsson | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 295 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 295 & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42]

    Additionally, make sure that the 3 G RF power control utility has been installed properly.
    3 G RF Power Control utility"turns your 3 G at the start.

    This tool can be found here:
    [3G RF Power Control utility for Win 7 64 bit, | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 322 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 322 & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42]

    Hope the 3G network functions the reinstallation of these two tools.

  • Difference between Tecra M10 and Tecra A10

    Dear forum
    The above says everything really.

    I see the two look identical, but one is smaller. These two models are different in other ways please.
    Ian

    Of course, the two laptops are different.
    There are different models Tecra A10 and there are different units Tecra M10.

    For example:
    Tecra * A10-13 b * supports Intel GM45 chipset and an Intel Core 2 Duo P8400 2.26 GHz CPU.

    Tecra * A10 - 1 2 * supports an Intel Core 2 Duo T9600 2.80 Ghz CPU Intel GM45 chipset

    You can find details of different laptop models left here:
    http://www.Toshiba.EU/discontinued-products/
    Then, you can compare all the pieces of hardware.

  • Tecra M10 - noise emissions

    Hello

    I'm new to this forum and looking for solution for continuous sound from the laptop Tecra M10. I can't play all other sounds. She starts soon as startup the laptop, but can be cut after the start of the window. Not sure if this is hardware or software. I spent at least 7 hours trying to fix this, but without success. Thank you very much for reading the post and any help will be much appreciated.

    Kind regards

    Kay

    Hello

    Since when you noticed this problem?
    What is your laptop pre-installed with original OS that you got with your laptop?

    Have you tested the feature with the factory settings?
    Is this problem with the internal speakers or there is no sound if you are using the headset too?
    > I spent at least 7 hours trying to fix this, but without success.
    What have you tried already?

  • Can I use Tecra A10 OS disk to install the OS on Tecra M10?

    I have a tecra A10 complete with Windows Vista Business installed (and saved in an image using Easeus Todo backup file

    However I also have access to a Tecra M10 entered without an operating system, although the sticker COST (product key) is the same for a windows Vista Business.

    My question is: would my Windows Vista Business backup work A10 on the M10 (i.e. would it load hard disk M10 and then to work properly)

    If someone can advise on this subject I would be grateful if you please

    Best wishes
    Ian

    At first, I must say that Toshiba recovery image created separately for each laptop model and it is 100% created to work on the specific model. Why?
    Each laptop model has different hardware platform and all the drivers, tools and utilities for some models are part of the recovery image. These recovery images are also tested.

    Generally if the two models have the same hardware platform (hardware) it can be used.

  • Blue screen of death, the Tecra M10 runing Win XP

    My Toshiba Tecra M10 works like a dream for three years without ever gasp

    Until the other day.

    My Toshiba laptop is constantly cycling with a BSoD - then I will start windows - it looks like it'll work - it gets in the paper password on screen - then a few blank screens - BSoD then again repeatedly

    I am running XP Pro SP 3

    I couldn't get my laptop to stop doing this, so I removed the battery and then the power cable and it started again and then when he went to BSoD I took a picture of the screen with my digicam fortunately I have one that focuses immediately and take the picture instantly too

    the ERROR is

    BAD_POOL_CALLER

    Tech Info

    STOP 0X000000C2 (0 X 00000043, 0XC38C0000, 0 X 00000000 0 00000000)

    I haven't changed anything on my PC recently and I have tried all the beginning of the top safe mode and last known good configuration but it still cycles round and round and round

    This laptop is not connected to anything and comes standard with a module of memory 2 MB in it to bog

    the last known good configuration does not either, nor did one of the other options in the "safe".

    So I slipped on the HARD drive and tried to boot from my XP CD - not the recovery of Toshiba, one that I have not tried this one in the laptop again.

    Rather unsurprisingly with no HARD drive in the laptop, I got a different error

    STOP 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

    which is I believe the inaccessible boot device - I know, it cannot see the HARD drive because it is sitting on my desk but would wait to boot from the XP CD... ISN'T IT?

    I tried to set all the parameters by default both boot - no difference

    With the HARD drive in - the laptop boots as windows user enter screen with no problems but doesn't stop on this screen - after a few screens blank the BSoD comes up and off it goes again.

    In the advanced startup options, I changed auto-start on setting error so it does not loop forever. and this prevents loop to the start cycle... seems to be changing this setting is not a permanent change

    Then I went into the BIOS and under the mode of the SATA AHCI to IDE controller and the STOP error 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000) is gone now and the pc will try to install Windows until I need to see the HARD drive and then gives up trying to install XP with a no. HHD error (the HHD is based of course on my desk) so it was a valid error expected...
    put the HARD return drive without changing the BIOS back makes it appear the STOP 0x000000C2 (0 x 00000043, 0xC38C0000, 0 x 00000000 0x00000000) error

    HELLLLLLLLLLLLLLLLLLLP please

    Hello

    I think you should test the HARD drive don't you agree?
    In my opinion, this should be the first part that should be checked since the new operating system installation was not possible

    I recommend the use of the tool called: HDD Drive Fitness Test. This software creates a bootable floppy to test. You can use this disk to run a test HARD drive without installation of any system.

    If the error would be detected: replace the HARD drive.
    If no error would be: use the Toshiba Recovery disk in order to install the system. (don t forget to put back the BIOS to default)

  • How much memory can I mount in a Tecra M10 - 1CN?

    How much memory can I mount in a Tecra M10 - 1CN and should be in two 200 pin SO DIMM DDR2 PC2-6400 800 MHz modules

    Hello

    Expand the memory depends on the chipset of the motherboard
    The Tecra M10 supports the chipset Mobile Intel GM45 Express and this chipset DDR2 800 MHz RAM 8 GB max

    So first of all, that you can use 2 x 4 GB RAM modules, and on the other hand the speed of memory is limited to 800 MHZ.

    Even if you use faster modules i.e. 1033 Mhz FSB would clock speed to 800 Mhz so it s not worth to use faster than the DDR2 800 Mhz modules

  • Cannot use scanner on my Tecra M10 finger print

    Hi all

    I have a toshiba tecra M10 PTMB1E laptop with fingerprint reader. IM on windows 7. now the problem I have is that I can't find any application program to run the fingerprint software? ive tried various software downloads of fingerprints on the toshiba site, but nothing works? If I check the devices drivers for the scanner are installed properly. If I type fingerprint in the box of files of research program, he is back with the following

    use your fingerprint with windows
    stop using your fingerprint with windows
    Maintain your fingerprint data
    Remove your fingerprints data
    biometric devices
    change the biometric parameters

    If I click on the first option, it takes me to an authentec page that says under construction? as if I'm going in "manage your fingerprint data?

    I can turn power biometrics, but nothing happens to start up, which allows me to use my fingerprints?

    If I go to the peripheral page biometric in the hardware section it says im not registered? If I click the link highlighted blue 'use your fingerprint with windows' it only take back me to this page of AUTHENTEC .com? and all that is under construction with different links page?

    scanners still used these laptops with windows more? or sector support windows?

    Hello

    On the page of the Toshiba UE driver you can find the fingerprint software and uninstall of fingerprints (this tool is needed to remove the fingerprint reader software)

    You need the software of fingerprint...
    ... more I recommend checking this docuemtn Toshiab concerning the use of the fingerprints:
    http://forums.Toshiba.com/T5/General...Ty/Ta-p/347084

    https://support.Toshiba.com/support/...tentId=3368363

  • Upgrade CPU to Tecra M10 - 13Z PTMB0E-01400LGR

    Hi, I want to improve my Tecra M10 with the CPU max supported. In fact, I have the Core Duo processor T5670 installed. Can someone give me info on the capabilities of the M10?

    ThankĀ“s in advance.

    Concerning

    Astra

    Hello

    Theoretically, you can use a CPU that is supported by the chipset.
    As far as I know the laptop supports the Chipset Mobile Intel GM45 Express.
    So you can see the Intel Gm45 Mobile Intel properties page and what would the supported processors.

    In general CPU upgrade a tricky thing but is stronger CPU produces more heat dissipation and could lead to overheating.
    In addition he s not 100% sure that BIOS would support the new processor.

    I also found this nice doc from Toshiba:
    Is it possible to upgrade the CPU or GPU of a Toshiba laptop?
    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  • Radio Frequency Interference on external monitor with Tecra M10

    I have a Tecra M10 that seems to emit RFI, causing lines of interference on the external VGA monitor and audible interference on its speakers.
    I was worried that this might be a hard drive in trouble, but before the call to support, decided to continue the investigation.

    First I tried unplugging all USB devices; the intervention was still there, so I tried to unplug the PC from the Express Port Replicator.
    As I moved forward, the noise has been reduced, and this led me to check the power supply.
    The unit is a 5 amp unit, PA3378-3AC3, and that seems to be the source of the DDR.

    Port replicator came with a spare unit 5 amp, PA2521E-2AC3, but there is too little noise from it.

    So I checked the two supplies with and without the duplicator.
    Noise each time.

    Suggestions - is something wrong or it is to be expected with the Tecra M10 RFI?

    Hello

    Have you checked if the same question would be displayed using the laptop with the own plugged AC adapter.
    Someone had very similar problem and it was a problem to the ground using a power cable 3 pins for different could solve this problem.

    But of course the question could be also related to the monitor cable external doggy.
    The user in this thread has this issue.
    The replacement of the power cable supplied with the monitor helped.

    It s worth a try check it out...

  • Tecra M10 - Diagnostic mode shows only 3 GB instead of 4 GB of RAM

    Hello

    I have 2 Tecra M10-133 and M10J. In both cases, the system BIOS shows 4 GB (4096 MB) memory total. When I activate the Diagnostic Mode (Enable) and restart the system, this shows the following:

    3072MB MEMORY CHECK 1 OK
    3072MB MEMORY CHECK 2 OK
    3072MB MEMORY CHECK 3 OK
    3072MB MEMORY CHECK 4 OK

    Some body knows the reason why does not not the 4096MB of RAM?

    Thank you very much..!

    Hello

    I'm not very well why the diagnosis Mode shows same 3072MB 4 GB are inserted m but what value of memory is reported by the Windows operating system?
    Windows recognizes the full 4 GB of RAM?

    I should mention that only 64-bit OS can use and recognize the full 4 GB of RAM.
    The 32 bit OS will recognize as the 3.2 GB

    The other thing is that the graphics card uses part of the RAM, but generally, this should not affect the Diagnostic Mode.

    However, check your BIOS version and if more recent BIOS was released, then I recommend you to update.

Maybe you are looking for