Tecra M10 - Sound does not work on Windows XP SP3
TECRA M10 sound does not work with Win XP SP3
1. the drivers from the toshiba web site.
2 chipset drivers and audio drivers were reinstalled no luck,.
3. no mute FN + Esc
4. feature eat that all drivers ok
If I understand your right all devices listed correctly in the Device Manager and you don t have yellow exclamation points?
Normally, for high definition sound cards, you need two patches from Microsoft:
KB835221 and KB888111.
Normally, these patches are integrated into SP3 but it works only if you install the audio driver after SP3. So, if you have an older version of XP without SP3, you must update to SP3, all first and then install the display driver.
So in your case, you must delete the current sound driver and restart the laptop. Then use CCleaner to clean the registry and system files. Reboot the laptop. Then download and install the driver of his newest Realtek Hompage.
my firewall does not work in windows xp sp3! ??
What kind of error do you get?
It could be the problem with malware infection or Firewall Service, try to run full scan with:
And remove all malware and see the result.
I have a Tecra M10 - 13L with Vista Business SP2 32-bit installed.
I tried to update my BIOS from v1.6 to the currently available in download v3.0 "bios - 20091104152403.zip" page support and unpacked "P0065v300.exe", dated to the 4.11.2009. When I run the program, I always get the message windows "install2 does not work" and that the process is abandoned.
In the C:\TOSHBIOS folder. UPD, I found an install2.exe dated 12.08.09 which seems is decompressed from the bios update file.
Any ideas how the update can be done?
I already loaded the update servers diferent BIOS file and tried several times, but its still the same problem.
Why do you update the BIOS?
Is there something wrong with the laptop?
BIOS should be updated only if you have a problem. If the laptop works well, then I wouldn't update this
However, I found three BIOS for Tecra M10 v3.0
-bios - 20091104172541.zip
-bios - 20091104152403.zip
-bios - 20091103164158.zip
Try if one of the packages of the BIOS might be decompressed correctly and the exe file could be executed.
I have a Tecra M3 I've updgraded to Windows 7. The touchpad does not work.
The Web of Toshiba site has a Windows 7 drivers for this model. I tried install the driver of the touchpad and PVAT from the A11 model but still cannot make it work.
Can anyone help? The audio is not working either.
This old Tecra is not supported for Vista, so it can be difficult to find the correct drivers.
I can see Tecra M4 is supported for 32-bit Vista, so use this with Win7 32-bit Vista driver in the hope that this will work.
Audio driver? Let Win7 look good pilot. By the way: your Tecra has AnalogDevices AD1981B audio chip inside. Try to find the right driver Googling autour.
Hi I tried various dirvers and can't seem to get this to work.
The driver installs fine, but then there is no sound on the headphones or speakers.
I tried the util_mute_off_25847B without success.
I have the dual boot and the sound works in the XP installation
I have server 2008 32-bit installed and sound was working.
The audio service is enabled.
The latest drivers, I tried where the Realtek_R219.
The front volume control does not work since I don't have the driver for it.
Model Tecra A8 PTA83-e 04l022g3
http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com decided .do w = Yes & PRODUCT_ID = 120557 .broadvision
I m a bit confused why you need a server operating system with the sound on the laptop...
However, I think that you can't do anything. Toshiba does not have drivers for a server operating system and if the manufacturing (Realtek) driver does not work, you have to accept that.
Sorry but there is no other solution.
I've done everything I can to set up the sound, but nothing seems to work.
When I re - start the sound will work for 2 min and then cut off and do not work until another re - start.
I'm on windows 8
This just started 07/13/14
How can I fix?
I fixed it! It's an update that does not work! I will give you instructions in Spanish (which is the language that I use):
Open the CONTROL PANEL and enter DESISTALAR PROGRAMAS, once you're there opened in WORM PLOTS when he opened you will see all the updates and look for one that says FORNUIS WINDOWS KB 2962407 once you find, uninstall it and reset the computer! That's all! : D I hope it works for you!
So, my computer does not work.
Specifically, it does not on any browser. Notifications from the computer work, but whenever I search something that his online, he will work the first time and ANY time after that not work then. Yesterday a friend and I were going through to try to challenge it... and we did it! He worked all day! Woke up this morning, am on Facebook and NOT of HIS. -_ - (Are you KIDDING ME?) I tried to update the driver, but he said that it was the best he could get, basically.
I don't know what the problem is! Help! (Please)
Most often when a device does not work, it is because the driver is damaged. Should help to re - install a new copy. You must install the latest driver EVEN IF WINDOWS SAYS YOU HAVE THE BEST as drivers become corrupt. Uninstall the current driver and without rebooting, install a new one.http://captaindbg.com/how-to-update-drivers-on-Windows-7/ (also works on Windows 8)
For some reason any "Play Sound File.vi' in LabVIEW 2009 SP1 x 64 won't read my files .wav on Ultimate Windows 7 x 64. It gives this error:
LabVIEW: (Hex 0x12C3) The sound driver or card does not support the desired operation.
The exact same code works (it will play .wav files) with LabVIEW 2009 SP1 on Windows 7 Home Premium 32 x 32 x.
Here are the results of the test cases I've tried so far:
Box 1: Dell Precision T3400, Ultimate in Windows 7 x 64, LabVIEW 2009 SP1 x 64 [does not]
Box 2: Dell Optiplex 755, Ultimate in Windows 7 x 64, LabVIEW 2009 SP1 x 64 [does not]
Box 3: Lenovo X100E Netbook, Windows 7 x 32 Home Premium, LabVIEW 2009 SP1 x 32 [works]
The "Beep.vi", however, works on all three machines. Audio devices on all three machines work fine when used by other non-LabVIEW applications.
I also tried several different .wav, including those stored in C:\Windows\Media files. None of them breed in BT on the zone 1 or zone 2.
The user account that I use still has privileges administrator on all 3 boxes.
All this experience? How can I fix it? I tried to dig into "Beep.vi" to see if I could reuse all subvis, but Beep.vi is password protected.
I got the wav files to play by calling the PlaySound method contained in C:\Windows\System32\winmm.dll.
Had to create a library function call and research, PlaySound interface.
The VI is attached to this message.
Counter strike 1.6 installs on windows xp sp3 but breaks down so that the opening match and return to the windows desktop.
Welcome to the Microsoft Answers site!
a. He worked before on your computer?
have b. you made changes recently?
c. do you get error message when your computer breaks down?
The most common cause of this problem is damaged or outdated video card drivers. Please make sure that your video card drivers are up to date.
You can also consider to reinstall the drivers for your video card if the game has worked previously on the same hardware you use now.
Also uninstall and reinstall cs strike and check if it helps.
Resources for troubleshooting problems in Windows XP:
Amal - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Just reinstalled xp with service pack 3 and I don't have any sound on my laptop, I did a windows update and there is nothing to make it work.
my laptop is viglan folder gx
How to install sound
Thanks for the reply.
Yes I was on the site of computers and it didn't there has so much listed and I do not know what 1 to install
I belarc advisor and there under multimeadia, it ranked
Unimodem half-duplex Audio device
Please could 1 help
When I send a Youtube video in a firend on Windows Live Messenger I can not hear the sound of the video and when a friend sent me a video of her webcam I can't hear the sound.
Do not worry. I fixed it. If someone wants to know that this is how I did it:
Open an instant message to a friend, click on tools, click on installation of audio and video, change the bar above the speaker by default, and then click Finish. The sound should work now.
I really need help!
The noise seems to have stopped working all of a sudden. I do not use this computer which often and have installed a new software, devices, etc. And no, it's not on mute and the its (Ctrl + Esc) is enabled. In Device Manager, I have subsequently appearing with no exclamation point on any one of them. I do not use speakers.
Sound video and game controllers:
-Legacy Audio Drivers
-Devices of Capture video legacy
-Media control devices
-SigmaTel C-Major Audio<- is="" this="" the="" sound="" card?="">->
I double-clicked on the SigmaTel and indicates that the device is functioning properly. I double-clicked on the properties and it is listed as a default. I tried to see if I could update the drivers but troubleshooting seemed to be looking on my computer and I got a message saying that he couldn't find something more recent.
Then I went to the Device Manager and selected speaker system. It is said that no drivers are installed for this device. Is this normal? Again, I have tried the update hardware wizard and received the same error message not being able to find a newer driver. Should I try to download a driver from the Toshiba site somewhere?
Thanks in advance,
Post edited by: funrunner
Try to remove SigmaTel C-Major Audio in the list and use the hardware in Control Panel. Let the system to reinstall the sound card and test it with a few music CD or mp3 files.
If nothing is done it please check all settings in the Volume control options. Don't forget option WAVE is not set to mute. Also try to test it with a helmet.
Please post the results.
I bought Bioshock to my new computer with windows 7 on it. The game loaded fine without a hitch. I left and then restarted the computer, load the game it worked very well past the credits and the beginning of the scene of the plane. After the crash no sound, of the accident to get the electric plasmid where I stopped the game NO SOUND at all. After that I tried to update directx 11, 10 and 9 c as on the box, still no sound. I wrote 2 k no games no response. I've updated the drivers on my msi Board, still no sound. I went back to the store and exchanged for another still no sound. "" I tried the compatibility program, I tried both xp and vista systems, and now it says in all cases which "bioshock.exe has stopped working ' and ends with. Then it askes for a solution on the web, I hit Yes and closed windows. A lot of help that was. I don't know what else to try anyone can help?
Hey good new I finally got sound now, here is the solution. I'm in his file, to the recording tab, click with the right button on the empty space under options and mic audio cd and enabled the mix stereo and here his...
So, I recently had a mistake huge hard drive, then I formatted the drive and installed Windows 10 I downloaded the BootCamp 5.1.5621 software (which is the version for this computer) and my audio didn't work. I've used Windows 8.1 in the past without Activation, but that was a few months ago. I've deleted it 2 days after I put it on the computer, but all drivers well worked out there. Although I plug in a USB headset and audio installed and worked fine! Help, please! I even reinstalled BootCamp!
I have the same Macbook Pro 2012 with boot camp and dual boot Windows-10 and Sierra.
Everything works fine. I think you have the wrong boot camp files.
I think that you need version 6. Reconnect to OS X and run the boot camp assistant and try to download new files from boot camp.
When I turned on our laptop today it says your audio hardware configuration has changed. You must reinstall soundmax. I went on the factory site and downloaded the player and the error still occurs. How can I fix it?
It affects only the system files, not personal files, see the following topic for more information about the system restore:
Maybe you are looking for
Hi allBrought 50 pro L100 hope to able to only one of them put in place then Ghost in the image of the other. I can't do the ghost to work at all, the startup disk binds to the Nic no problem, but when it starts to load the dos based console just gho
I have the 3-in-one photosmart scanner 7510 and I think the scan is poor flatbedded unless. This never happened with my previous HP scanner. Also my cartridge black lasted less then a month, which I think is very unusual as I rarely print anything lo
I keep getting this pop up message of "web page", that locks me then: "Out of MEMORY AT LINE 1." I cannot close after this point. I have to disconnect and close before I can continue to use my laptop. All those who encounter this problem?
Can anyone recommend a good book or online resource that presents the C++ to Java developers? I'm looking for a "quick start" tutorial that can highlight the differences between languages and help me avoid various pitfalls.
HelloI'm working on a page with a form for users to download the data. When you press the "submit" button, it runs a process Page. After the process is complete (i.e., to insert a new record of DB) we need to create a branch to a new page with trea