Tecra M2 and wireless network - signal strength problem

Similar Questions

• How to configure a multihomed in Windows 7, wired network and wireless networks at the same time?

  Hello

  I have a fixed computer Windows 7, I need to configure for the use of wire and wireless networks.

  On the phone we transfer vast amounts of data, astronomy cameras than only products of 20 to 30 seconds, space images 3-4 GB each. The cameras are connected to the top of a tower, which in turn is connected via a 45 feet cable CAT-5 to the search engine.

  Internet access requires a wireless network connection.

  These two connections work - separately. I have to disable an and activate the other to pass. This jump back and foth is obviously a bit inconvenient.

  How to configure Windows 7 to manage both types of networks at the same time? On another forum I learned this kind of configuration is called multihoming, and it's something difficult to achieve.

  Having studied more about it, there is another possible solution called Internet connection sharing. that may be easier. I haven't used this option for years (since the routers were introduced) but is still active.

  Disable DHCP on the Dovado or use a cable between the PC and the laptop.

  Turn on the wireless on the PC and make sure that you have an internet connection. Disable wireless on the laptop. Connect the PC's LAN ports and laptop (via router or a cable crossover).

  IN the network of PCs and next to the connections Sharing Center, you must have 2 Ethernet and WiFi options. Double click on WiFi, then on the next screen, click Properties.

  The second tab in the next screen is sharing, check allow other users of the network to connect and then OK.

  Define the IP addresses for PC and laptop as in my previous post, but this time on the laptop set the default gateway to the IP address of the Wired of the PC port, the 1st DNS to the address of the Huawei and value of secondary school who suggested for your ISP.

  This affects your PC to access wireless internet and allows the laptop to access the internet via the PC

  Basic information about ICS are HERE

  Manuals for the Dovado HERE

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• (Satellite-M45-S269) alternating current and wireless network connection

  Hey!
  Recently I had the following problem: when the laptop is plugged into AC power, wireless works strangely. I want to say that I am able to connect (in fact the signal strength is excellent and packages, the computer receives notoriously exceeds those sent) However, every four or five minutes and always connected, unable to load web pages, as well as the lights of the connection icon in the taskbar wireless network does not appear then this problem occurs (which I (, it means that I stop receiving packets)

  However, this only happens when the laptop is plugged into AC power.
  Any ideas on what's going on? The battery begins to fail? The other day when I turned on the laptop, the screen went black and started making a strange noise, so I removed the battery and put it back, and it worked again.

  Hope someone can help me.
  Looking forward to hearing responses.
  Thank you
  Augustine.

  Hello

  I recommend following:
  First check to see if you can update the WLan card driver.
  If the new driver WLan is available the updated it!
  Also the BIOS should be updated to the newest version too.

  After the update did go to Device Manager and check WLan card properties.
  There is a last power management tab.
  There, you can disable the WLan Card for energy savings.

  Check it out!

• a6755y: a6755y wired and wireless network hard

  I already spoke with my ISP nothing helps technical support.

  I recently created my desktop computer again after having been stored for several months. Before I put it there, I was using wireless internet and local wireline connections regularly and without problem, and now I can not access to either. I have a strong connection with the modem/router device, so I thought that the issue could be in how its configuration or interpret the connection from my computer, but nothing, I have discovered has indicated that this was the case, and convenience store customer support my ISP did not find anything abnormal. I was now more confused when I discovered that it also fails to connect to another computer using a direct wired connection, even though I had in the past linked their and transfer large files regularly. I would like to assume that these issues are linked, to make the simplest solution; but as one involves a separate network adapter, and the other connects directly to the motherboard, I don't think that's likely.

  For any help or suggestion would be appreciated.

  Hi there @_GS
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you pulled on your desktop, storage and now you can not connect to your wireless network.  I'm happy to help you with this problem.

  Is this the same router that you were using before you put the computer in stock?

  How is the computer to the router? (Sometimes too much signal is as bad as not enough)

  What type of cable you are using for the connection from computer to computer, you mentioned?

  There is special software required?

  Have you other wireless devices that are connected to this router without problem?

  The following pages are useful to the resolution of the problems of wireless connectivity and can help solve this problem.  Try it and tell me if it helps.
  Troubleshooting wireless network and Internet (Windows Vista)

  HP and Compaq Desktop PCs - troubleshooting your network wireless (Windows Vista)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget a network (Windows Vista)
  1. start network and sharing Center.
  2. in the pane tasks, click on manage wireless networks.
  3. right click on the connection that you want to delete and then click on remove network.
  4. in wireless networks handle - warning dialog box, click OK.
  5. the connection is removed from the list of wireless connections that you can view or edit.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

• HP laptop: scope and the wifi signal strength

  very very weak signal wifi and range signL force is very low, even I'm sitting near router I try every thing but not solve issue please help I use window 8 pro

  HI @vickysaeed,

  Welcome to the HP Forum! Is a great site to find information, tips and suggestions. You have the most rewarding experience please consult the HP Guide's Forums. First time here? Learn how Post and more what is your exact model of HP laptop?  Computers laptops HP - how can I find my model number, serial number or product? What operating system do you use?

  I understand that your wireless network has a short range of signal and the signal is weak, even if you sit close to the router. Even if you've tried a few troubleshooting you have not been able to overcome this difficulty. Assuming that you are running Windows, have you checked the updates? You ran the Windows troubleshooting tool? Did you run the HP Support Assistant?  Please read this post on the @Greatforum - Deku Tree as it should help. Commons fixes for wireless connectivity problems Please keep me updated on your progress.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• Wireless network signal strong with IP address correct but still no internet!

  I'm trying to set up a wireless network by using a 2wire gateway. Initially, my Dell laptop (XP) would receive a signal, but cannot connect. I received the generic 169.XXX.XXX.XXX IP address. After some research, I went into properties and changed the IP info and gateway to match my router. This solved my "limited / no activity" problem I had and the correct IP address showed also on my laptop. HOWEVER... I can not connect to internet. I did the "run...". IP/config' thing and still no dice. Any help will be appreciated!

  Hi jns4be,

  Thanks for all the information. With the wireless is not unable to broadcast a signal, you will need to contact 2-wire or it is provided by your Internet access provider. With the computer plugged it looks like you are renting an IP right as shown above.

  ... Description: Broadcom 440 x 10/100 Integrated Controller
  ... The IP address: 192.168.1.116

  Can connect you to the internet? As it appears IP or valid, you communicate with your entry door.

  Thank you! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Booster and wireless network

  Found it difficult to get a signal in some places in the House. I have a WRT54GS router and just bought a Lynksys signal booster.  Can get internet on Mac laptop and desktop wired.  On my desktop wireless, I have signal strength is very good, but cannot access the internet.  Help

  JC

  What is the model of the wireless adapter?

  Which operating system you are using on the Wireless Office?

  Which exact error message do you get when you try to connect to the wireless network...?

• Cannot connect Tecra 9000 to wireless network

  Hello

  I am trying to connect my laptop Toshiba T9000 to my BT home Hub 2.0 Wireless v but a little difficulty.
  The laptop recognizes the hub, but every time I click on connect, I get the same message.

  ""Windows cannot connect to the selected network. " The network can be is no longer in range. Please refresh the list of available networks and try to connect again"

  I went through a few troubleshooting steps to resolve this problem, but always without success.
  Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?

  I am not very computer but if anyone has any additional input to help me with this question then I would be very happy.

  Kind regards
  Answer by quoting

  > Can I update the driver? My inclination is that this may have something to do with the laptop is not able to support WPA?
  This may be possible

  The point is that this laptop is an oldie and the wireless network adapter appears to be old too.
  I ve no idea what WLan card you have, but you could try to connect to the WLan without use of encryption settings. Disable encryption on the router Wlan and test connectivity again. of course, this must be done only for testing purposes
  The wireless network must be always secure

  The alternative could be the use of external USB WLAN, it would be the easiest and fastest way for that to be resolved

• No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

  I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

  Deactivation and reactivation of these two connections: FAIL.

  "Diagnose and repair" on the two connections: FAIL.

  Under dynamic I.P. type to static/static to the dynamic: FAIL.

  Uninstalled all network via Device Manager devices, then restart: FAIL.

  Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

  The command ipconfig/all text follows:

  ----------------------------------------------
  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Brooklyn's>ipconfig/all

  Windows IP configuration

  Name of the host...: Brooklyns-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-21-5C-31-87-95
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-4E-2E-F7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
  B4B}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
  0FA}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Brooklyn's >
  --------------------------------------------------

  Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

  I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

• BlackBerry Z10 Z10 and the carrier Signal strength

  I don't know if this is related to the question of appeals Z10 has dropped, but I noticed that my carrier signal strength jumps from full bars to (say) 2 shelves for the big X red for no reason my phone is just sitting there.

  This may be related, but I also calls recently, and my quality of phone (although normally I would say great) was virtually zero as if I had to drive into a tunnel (you know, that jerky digitized sound).  Actually, I was sitting in front of one of my rounds of carriers.

  I would appreciate ideas... I'm on OS 10.1.0.1720 official on Telus.

  I have the same problem on Rogers and my father done to MTS. We are in Manitoba. Very strange how it fluctuates constantly. Found in Toronto it was stable, and the LTE with Rogers.

• Satellite 1900-303 and wireless network?

  I just hand on one of these laptops. However, there is a switch that seems to have a Simbel wireless on the right side of the machine and a light symbol on the front that does not appear in the manual for this laptop wireless. Anyone know if this phone has the ability to internal wireless network? What does this switch and the light? How to activate it etc?

  Any help much apreciated

  Al

  I bought the same laptop new 2 years ago and in the manual, there was an addendum explaining that if there were an equipped module as a dealer option then the machine was Wi Fi... The symbol on the front lights up when you press the switch on the right side when a Toshiba module is mounted but not if you use a card pc as a Belkin (which I use)... Please see response below Toshiba.
  ==============
  The internal Wireless LAN Mini PCI card is no longer supported.
  The option of Toshiba part number was PA3212U-3MPC (Wireless LAN Mini PCI Card
  -2, 4 GHz, 802. 11B - dealer Option). You can check with our sales
  and Marketing shop Toshiba team on 0870 444 8944 to determine if
  stocks remain and if so, information on prices.

  The LED on the laptop only turns on when you use the internal wireless
  LAN Mini PCI card. When you use the PC as the Belkin card LED will be
  does not light. If the Belkin card works and meets your needs, then we
  suggest that you continue to use you this card.

  Concerning

  Customer Contact Center
  Division of information systems
  Information systems of Toshiba (UK) Limited

  Hope that solves your query,

  Considers that Russell.

• Satellite C660 - key FN and wireless network detection no longer works

  Hi people,

  As a result of a virus, I put my computer to its factory settings.

  I have however lost the use of the function fn (end?) of the keyboard since and therefore cannot control the lighting of the screen and so on via the F keys any longer.

  Also, my computer can not detect wireless networks more. I did all the required updates and checked the State of the wireless card, but still nothing.

  Any ideas?

  See you soon!

  Hello

  May I ask what system you have installed on this laptop?
  Is - this Windows 7?

  If you are using Windows 7, you need to install Toshiba Value added Package and Support Toshiba Flash Cards for utility work affects FN.

  I m nit course on the WLan driver because different C660-xxx supports various wireless network cards. Perhaps you could provide the name of the complete model of the C660-xxx
  This would facilitate the search for the Wlan driver.

• PC connection and wireless network?

  Only, I ordered my mom a HP Envy 5530 and have looked through the manual. I'm a little still well confused on which method to use to connect to the wireless network.

  Currently, she has a Canon printer & scanner connected to a PC via USB and I could leave them installed until I'm sure she'll love the envy... its router is connected to this PC.

  She would like to be able to use the 5530 for print & scan from the PC but also to print wireless from its iPhone / iPad.

  So should which method I use to connect the 5530 to PC & Wireless network?

  This is possible. Once the printer on the network, it can print from any device that is also on the network. In other words, if the PC is on the network, it can print her wireless too, she didn't need the USB cable connected to anything. If she wants to connect the USB cable to the computer on which is correct also. In the end, as long as the printer is configured for the network, she will be able to print from his iPhone and iPad!

  He didn't need a wireless adapter, the printer is equipped with a wireless radio which allows it to be configured for the network.

• change router and wireless network

  After I change provider and wireless router my wireless printer won't connect and print wireless will print with cable but not wireless. What should I do to fix this

  Hi floats,

  You will find that this document contains instructions to install the product in a wireless network using an access point , such as a router . This type of network is called an infrastructure network. HP recommends the type of network infrastructure for a wireless connection to your product.

  Follow the steps outlined in the document below and let me know how it goes?

  http://support.HP.com/us-en/document/c02213840