Tecra M2 is supports SD HC 4 GB cards?

Similar Questions

• Tecra M4 does support SDHC cards?

  Hello

  All do not know if the slot SD Tecra M4 support SDHC card or not?

  I don't want to lose my money to buy and use a test card.
  Thank you very much

  What is the said user's manual?
  Have you checked it?

  I checked it and it seems that the slot only supports up to 4GB SD cards.

  This is why the use of the SDHC card should not be possible. Oh wait it's possible, but you would need to connect to an external card reader that supports these cards.

  Concerning

• Satellite 4260 it support II 32-bit PCMCIA cards?

  Is my laptop, TOSHIBA boom 4260 support II 32-bit PCMCIA cards? Because I bought a USB 2.0 cardbus and its not working now. Its is cards RCMCIA 32 bit.

  Help, please! Thank you

  Hello

  You can see for yourself when you access the BIOS with pressing ESC after starting upwards. Then go to PCMCIA and see if you see CARDBUS or replace it with CARDBUS

  Good bye

• Tecra M10 does support VT?

  Hi all

  I have a Tecra M10 - 13 K 8 GB RAM (PTMB0E-01600LGR) BIOS V2.10 with Intel T5870 CPU (which is not taken in charge VT). My Chipset is Intel GM45 Express.
  I want to install Ubuntu 9.10 (64 bit) with VMWare Server 2.0.x and create Virtual Machines with Windows 7 (64-bit) and Ubuntu 9.10 (64-bit).

  But my CPU does not support the VT!

  Now, I want to buy Intel CPU T7250 and replace my old CPU. Would this work? The BIOS must support the? Do I need a new Version of BIOS?

  Thank you and best regards,

  Hello

  First of all you cannot use virtual technology if the processor does not support this feature.
  Second, the replacement of the CPU is not desirable and often delicate!
  The BIOS has not been tested with a different CPU, and no one can tell if the laptop would be stable after an upgrade of the CPU.

  Take a look at this Toshiba doc:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Tecra A9 does support DVI-port replicator Express

  Hello

  does the Tecra A9 (PTS52E-01T02NGR) support the DVI-port of the express duplicator?

  The manual (for Tecra A9, Tecra S5, Satellite Pro S200) says this, but the screen is black, if I connect the monitor via DVI port. It works using VGA, but poor quality (interference).

  My colleagues all have the same problem. We use different samsung TFT; the operating system is Win XP Pro.
  The manual also says "..." Maybe some DVI monitors can be used... "but before testing the other monitors, it would be interesting if there is no DVI at all...

  Thanks for your help!
  Daniel

  Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
  The DVI port on the Port Replicator Port Express is * supported only on computers with graphics card ATI or nVidia *.

  If you have a DVI INTEL graphics card port on the on the Port Replicator Port Express is * DO NOT supported *.

  Best regards

• Done Tecra A8 PTA83E support 5.1 system speakers & how to connect it

  I have Tecra A8 PTA83E lap top model. (Serial No.: X6100725H)
  When I check my audio system in the Control Panel, it is show the types of outputs for 5.1 suround sytem, even some more up to 7...

  I bought a 5.1 speaker system, now I want to connect with the laptop.
  It has two input pins normal for speakers and input microphone.

  When I check the laptop, it has two plugs for the audio output and others for the mic input.

  Could you please tell me this laptop will support, if so, where the decision-making support or what I by an adapter that allows two taken from a jack (laptop audio output)?

  Thanks in advance,
  Karine

  As far as I know this will work with a digital output only sound. At your Tecra this optical port? I don t think so. I know that Toshiba multimedia notebooks have a.
  So I think that you cannot connect to 5.1 surround sound directly on your Tecra.

  Sound in the Panel options are standard options of Vista.

• Tecra M1 and support external graphics resolution 1400 x 1050

  Hello!

  Are there special drivers or solutions that support the resolution 1400 x 1050 on an external monitor with Tecra M1?

  Spec. I do not have this resolution too choose:
  Trident XP4m32 graphics controller. 32 MB of video memory DDR
  Support of the exterior colors:
  1280 x 1024, 1024 x 768, 800 x 600; 100 Hz Non interlaced @ 16 M
  1600 x 1200; 85 Hz Non interlaced @ 16 M
  2048 x 1536, 1920 x 1440; 60 Hz Non interlaced @ 16 M

  / Shovel

  Hello

  Your favorite resolution 1400 x 1050 is not available because the graphics card or a chip of the graphics card driver does not support this resolution.

  In your manual, you can find details about the external resolutions supported and available.
  Check it out.

  If 1400 x 1050 is not mentioned then the GPU would not support this and that's why you would not be able to use it!

  Good bye

• Tecra S10 - 10F - Support Button Multimedia problem

  Hello

  I have Toshiba Tecra S10-10th with Win Vista SP2.
  I have problem with Toshiba button Support.
  After a clean install of Vista, everything works fine. Now two buttons next to the button toshiba walk / stop don't work. When I uninstalled 'toshiba value added package', buttons was answered but open "windows Mobility Center.

  When I installed Toshiba value added Pachage once again, the buttons are no longer...

  Could someone help me pls?

  THX

  Hello

  This strange s
  Usually the installation of VAP should help you get the buttons working again.
  Value added package contains tools and utilities that are necessary for the functionality of the multimedia buttons

  Please install the VAP, and then configure the keys still using the utility button Toshiba located in Toshiba Assist-> optimize

  There you have to click on the button, and then you set some for some exe file button.
  Single exe files are in C:\Programs\Toshiba\TBS

  Welcome them

• Tecra M5: Need support USB2 for SATA HDD

  My beautiful new Tecra M5 uses a SATA drive, but most USB enclosures still accept only IDE drives. My question is: does anyone know of a door-USB2 for a SATA drive?

  I would like a similar disk box USB2 to backup my Tecra laptop by cloning the full hard drive (using Casper XP). If/when the primary drive fails, or some other calamity, all strikes do I have to do is to replace the internal drive with USB support. (It is not so common, but my hard drive failed once, and the cloned drive saved the day).

  Until I can find a SATA support I use Acronis True Image to backup on an IDE drive images in a USB support. Even if it seems effective, I'd rather have a cloned drive because it is easier to make a recovery dummy to prove that the procedure works without risking to damage the data on the primary disk simultaneously.

  David Tong.

  Hello

  As far as I know the external uses the IDE interface.
  I have not seen cases of HARD drive external for a SATA HDD.
  But you can also use the external USB case with an IDE interface for backups. But you need a new HARD drive. But the HARD drive are not very expensive (depends on the size of the HARD disk)
  You can save the backup image to a file and then you can place the file on the external HARD drive.
  If something goes wrong with your OS, so you can use the backup file to restore your operating system.

• Tecra S5 - no support display 1680 x 1050 under Win XP

  Hello

  I have a Tecra S5 with NVIDIA Quadro NVS 130 M, 512 MB. The driver version is 6.14.11.5692.
  And monitor external en Samsung SyncMaster 2232BW.

  Using Win Vista as an operating system, I can set the resolution to 1680 x 1050 for the external monitor.
  But I pass on Win XP and now I don't have to choose the resolution 1680 x 1050 for the Samsung monitor.

  Can you help me on this?

  Have you installed the latest display for Windows XP driver?
  On the Toshiba website version 6.14.11.5692 for Windows XP is the newest (even in Vista).
  http://EU.computers.Toshiba-Europe.com

  The external monitor is recognized as a Plug & Play monitor?
  You can also test pilots of the manufacturing. There is a driver available for Windows XP.

• Tecra 9100: Try to install updadet driver for card his Yamaha AC - XG

  Hi all

  I got a Tecra 9100 and like many others I had problems after installing SP2.

  I tried to install the sound card with the driver downloaded from the toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

  but I get a windows pop saying that the file yacxg.sys is missing.
  Once the installation is complete and the sound card is not installed.

  Is there anyone who can help me?

  Thank you
  Joazinho

  The fact is that the driver listed in the FAQ from Toshiba is for SP1 and NOT for SP2

  I think you should google a bit and should look for if you find an audio driver that is compatible with the Service Pack 2 update

  Yamaha already provides the fixed driver.

  yacxg.sys 6.13.10.2152 with software synthesizer

  yacxgc.sys 6.13.10.3152 free software synthesizer

• Tecra 9100 cann't find the internal wireless card

  I have Tecra 9100. Recently he started to act strange. Sometimes (rarely), it cannot find its internal wireless card or / and hang (freeze). When I check the device manager card is simply not there. After the reboot, the map pops up sometimes, but not for long.
  I checked the event viewer, but the only Error Message is:
  Source: Service Control Manager
  Event ID: 7000
  Description: The OrangeWire USB enhanced host controller service could not start because of the following error: the specified driver is invalid.

  2 USB ports are working perfect. What is the link between that message and the internal wireless card?
  Any ideas how to fix? I'm with Windows XP SP2.
  Thank you.

  I put t think the WiFi problem could be related to the USB enhanced host controller service. I don t see a consistency

  You can try several steps; first try to install the latest driver WLan.
  Access card WLan (device-> Properties Manager) properties, and then clear the option to save energy.
  Additionally, you will find different option in the Advanced tab.
  I can t Advisor was 100% what options need to be changed because each wireless network card supports different function.

  Whatever the case the advice above will not help not I think there could be something wrong with the OS files or registry keys.
  In this case, it would be very interesting to know if the installation of clean operating system might help.

• Is it normal for people to support iTunes to iTunes gift card number

  Hello

  Recently I contact iTunes support to convert my unused iTunes Apple Store Gift card gift. I received an e-mail from answer [email protected] asking for personal details like name, email, phone number and gift card number. I confirmed with them, they want me off the map and give them that number.

  -Is this normal that iTunes support ask for gift card number?

  If they agreed to convert while they are likely to want the card number, they you to "buy back" so that the card can not be used by anyone

• Tecra S1: Should what type of wireless network card I?

  Hello. I do a new install of XP, and I don't have the CD that came with the computer. I have before, but have not been able to get the wireless or bluetooth to work. I need to know what type of wireless card I have...
  Tecra S1 model number: PT831A - 67CS8

  can anyone help?

  Thank you
  -mat

  Hello

  As far as I know that the Tecra S1 has no card network wireless not installed, but you can improve it with a minPCI wireless network card.
  The drivers needed, you must download it from the page of the Toshiba driver or drivers will come with a wireless network card.
  Also the Bluetooth is an option on this unit.

• Satellite P100-429 does support the 5-in-1 card reader?

  IM wanting to buy a new laptop computer and is came through the "Toshiba Satellite P100-429'." It's the portable perfect! However, when I searched the internet for a detailed technical specification, I found that on pixmania.co.uk he states that there is no memory card reader:

  http://www.Pixmania.co.UK/UK/UK/462038/art/Toshiba/Satellite-P100-429.html

  Still other sites, he says that there is a 5-in-1 including Toshiba card reader themselves. It is therefore possible to have the same laptop model but with a different specification? or is it a typo in the site of pixmania? Thank you

  > is it possible to have the same laptop model but with a different technique
  Of course, many laptops in the same series were delivered with different hardware specifications it is nothing unusual.

  For example, the dvi video port, express card slot or the married media card slot are available on some models.
  I would trust the Web from Toshiba site and this model should support housing ExpressCard and a PCMCIA Type II slot.
  The slot SD, Compact Flash Card slot card and smart card reader are not available on this model