Tecra M2 starts only in safe mode
I recently installed Norton products in my laptop Tecra M2, who met the necessary attention problems.
However, when a Norton technician has resolved the problem, the laptop freezes and since my laptop was implemented in safe mode.
Tried several options to return to the normal mode it but fail, every time then restart, it changes again in safe mode and I am not able to access my USB wireless internet and many programs that I use frequently.
Help please! I don't want to reformat the entire computer unless it's the last resort!
You can remove the Norton software in safe mode? Try this!
To be honest I n t have good experience with Norton.
In the worst case, you must reinstall the operating system as said Garrett. It is the only way to recover a system that works.
I reformatted computer my husband, during the process of re-setup the computer shut down & restarted in safe mode. I can't the computer to start Windows normally, it starts only in safe mode or at least what looks like safe mode. I am trying to install Windows XP Home Edition. I was not able to install any device to connect to the internet on this subject, so I can install SP3.
Can someone help me solve this problem please
Since you formatted and installed windows, its non-secure mode. Try to install display drivers. You can check if the display drivers are installed correctly click Start-> settings-> Control Panel-> system. Hardware-> display adapters. If you have any yellow exclamation next to any device, you must install the drivers.
I hope this helps.
* You need to install all the drivers of your motherboard / driver cd (which came with your pc), including the chipset, sound... etc.
If it's a laptop brand / Office (HP, Dell, Acer, etc), you can visit the manufacturing site and select the model and download the latest orders.
My macbook OS 10.11.4 recently close and wouldn't turn on after an electrical fault at the club I was DJing. The next morning, I disconnected the battery and plugged it back. When I turned on the PC, he gave the kernel panic and would only turn on in safe mode. I tried to go to recovery (command-R) mode, but that does nothing, when I start my computer.
What happens here? How can I fix? Help, please
These must be run as administrator. If you have only one user account, you are the administrator.
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSIS AND diagnostic USE information reports ▹ System
(not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report.
I know that the report is long, perhaps several hundred lines. Please report all this anyway.
When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
I can boot into safe mode.
Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.
Any ideas what could cause this problem?
Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?
any advice appreciated,
Thanks in advance.
Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
In this case, the recovery procedure should solve this problem.
If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
These software, you will find on the page of the Toshiba driver.
The other night I tried to update my software to the iphone via itunes on the cell above type and he always took a day and kept failing so thought I would leave until the next day. The next day, when I turned on my laptop, the initial splash screen qosmio came immediately followed by a full page of random letters, numbers and shapes. This step was followed by followed normal loading windows xp still screen by a blue screen that appears very fast with full info on which you can read as it appears only a fraction of a second! Laptop computer then restarts, and the process is repeated, endlessly looped.
I managed to start the computer in safe mode and ran the diagnostic tool and the hard drive, processor, graphics etc all test OK. I also had the NIC in safe mode and have been able to connect to the internet, etc.
Is there a possibility that this could be a fault of RAM? Is there no quick check I can do to determine this replacing it? In addition, do not know if it's related but windows asked me at the beginning upward in safe mode to increase the file size of virtual memory page was not big enough.
Any help would be appreciated.
Thank you very much
> Is there a possibility that this could be a fault of RAM? Is there no quick check I can do to determine this replacing it?
You should try utility called www.memtest.org Memtest to test the RAM if the test shows that your Ram is ok, reinstall the Os.
I went to stop my dell studio 1737 last night and it is stuck on "shutting down" and so finally I used the power button to turn it off, and now it will only start in safe mode or safe mode with network. My restore disk is in stock somewhere as I just moved it background.Can someone help me solve this problem without the ERD? I made the diagnosis and it passed everything.
1 did you recent hardware or changes to the software of the system?
2. you receive messages or error codes when you try to start in normal mode?
Because you can start in safe mode, you can try to perform a system restore and see if it helps.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following links:
Hope this information is useful.
Yesterday, I got a trojan, Anti-Spyware Soft virus accidentally. I'm confident enough, I removed the virus (removed from the registry, ran Malaware which found other cases of the virus attack), but now my computer will only start in safe mode.
I made sure that the box was not clicked in the menu in msconfig. I tried pressing F8 and using the Startup Repair utility, that is no problem. I can't do a system restore, that there is no restore point. This is very frustrating and I am at my wits end, what should I do?
In safe mode, click Start, run then type in msconfig and click OK. On the check in tab boot to see if Safe Mode is enabled under Boot Options. If so, uncheck it and try to restart.
My computer would not start windows normally, except secure boot Mood.
Please tell us how to correct the faults.
- Close all running programs and open the windows if you are back on the desktop.
- Click on the Start () button.
- In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
- The System Configuration utility opens
- Make sure the Normal startup is selected
- then click on the STARTUP tab at the top
- Make sure that the startup is disabled
- Apply - OK - then follow restart guests
If the above isn't the problem;
1st thing to try is a restoration of the system in safe mode
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
Unfortunately, my Windows 7 has become unstable again.
Windows starts in safe mode.
I would like to reinstall Windows, but... of course, Acrobat will not deactivate this mode.
So, I would like to know how to disable Acrobat Reader in safe mode.
Acrobat allows a few activations due scenarios just like that. In the case that, after you reinstalled Windows, Acrobat you indicates that you have too many activations, you can contact our support team, and they can work with you to get the matter sorted.
Running Vista SP2 64 bit on a Dell Inspiron 530. System will come up to the login window, if there is no connection - will restart on its own, repeatedly. It will allow me to log in, but as soon as I get on the desktop, in a short period of time, it will restart.
I am able to connect through safe mode and safe mode with networking mode. I tried the system restore by selecting many different restore points using rstrui.exe / offline: C:\windows command safe mode. The operating system is running on the C drive. Status on C «Ready to restore» watch
He always enough immediately cause the error:
System restore failed... System restore failed due to an unspecified error. The parameter is incorrect. (0 x 80070057)
I did not knowingly install something again before that happens.
What to do next?
Here's how to use the system without a command restore.
And information of Dell.
How ro reinstall from the Dell recovery partition:
Reinstalling the printer Dell supplied disk:
Reference Dell troubleshooting with startup problems:
Run the built-in diagnostic software:
And if this does not resolve your problem, please contact Dell or their Support Forums:
See you soon.
As the title says. What should do?
I found out what is wrong. The hard drive could not be "read". Drive C and D was crushed. Had to change the hard drive. Changed, working (y). Thanks anyway :)
Hay, my Satellite Pro L300 computer can be started in SafeMode only because if I start it normally it access to the desktop and then freezers.
Can someone help with this problem?
If the computer starts only in safe mode, this means that something has confused the OS
Since when have you noticed the problem?
No doubt it can help you to restore the system to a previous point. If it doesn t help your only option seems to be to reinstall Windows I think. Therefore, you can use the Toshiba Recovery drivers with tools disk :)
I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system. I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully. Only in Safe Mode. When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.
Windows XP worked when to stop, and when turned on overnight, it only shows: safe mode, safe mode with networking etc. This is the result of an update from Microsoft to restart?
The system does not start normally and brings only to the top of the screen black ad askes to start windows normally, safe mode or network, etc. What should I do?
Once selected, Safe Mode works?
If so, try boot minimum troubleshooting:
If this is not the case, have we not access to a Windows XP CD?
If so, we can use it to boot into the Recovery Console and to pursue the options from there.
Let us know.
I get error page_fault_in_nonpaged_area, I can not even to start windows in safe mode, I can't really afford to lose everthing on my laptop, it did not come with any disk, I have not installed new hardware, only the new software is Google Chrome with a few Add-ons for it, laptop Dell with Windows XP Please help
I don't really know what to do, I can't access the windows at all, please help
To retrieve your documents, you can download a program called knoppix that you can put on a cd. Then boot on this cd. They copy the documents on another device. Here's a link for you help do - option 3
MyPcHealth - free tools
Maybe you are looking for
I was on CNET, and Apple has the date of official release for Sierra OS for everyone, not beta. It's for everyone. Release date is Sept. 20. It's on CNET for all to see. I can't wait to upgrade my MacBook Pro at the time Carol I currently have el Cap
Hello I know that it isn't the best article at the post office, but there is no instance void for my computer (Satellite NB10T) series and this problem is bound to win 8I'm stuck at the moment: I disentailed 8 victory because I want to go back to 7 I
Hello I'm filling table 2D with 0 using 2 for cycles and writing to a binary file, but I have the problem with the types of data - source type is table 1 d, but sink's refnum. Can you help me?
Hi- I'm new brandie mp3 players... and I must say that I learned a little This forum... I just downloaded a book audio mp3 - I dragged and bumped on my sansa fuze in audio books -. the files are all labelled correctly and in order. I was in MSC mode
HY, I have a question on my labtop. OK, so I just cleaned up and I guess the labtop accompanying had deleted, is a VAIO windows 7 labtop. hd webcam doestnt work, vegas, ACID, Sound Forge does not Vaio care I don't even see this pleaase help me!