Tecra M3 - black and white points

IM problem with my Tecra M3,

I have the Toshiba logo came fine.
Then a bunch of black and white, (its windows when crashed and gives you option in safe mode) but you can't get out of the text, I only know because Ive delt with computers crashed before.

Start windows XP SP 2 basically there is a white bar at points vertically and scroll down.
Then finally goes blue screen of death and reboots.

I changed the HARD drive with my old operating system if it is not a virus, I've agreed with the ram, which is 2 x 1 GB sticks.
Ive tested individually and together, and yet I still get the same problem I mentioned above when I start my computer.

If this isn't a virus or HARD drive, it is not the ram, what is the problem here? The screen looks fine with the toshiba logo (no points from top to bottom)

What do I need to fix? What is broken?

Someone who can help much apprciated.

see you soon

Why put 2 times in different threads on the same issue?
Check this box:
http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=182726

Tags: Toshiba

Similar Questions

  • Develop the preset for the black and white Points

    Is it possible to create a preset that will find the correct point black and white individually for each photo to import?

    The [auto tone] button in the quick develop Panel is as close you will arrive at an Auto setting of the black and white points.

    But many find it also changes exposure requiring several slider adjustments.

    You will get the best results if you hold down the [ALT] key when you move the black and white sliders, or press 'J' to set the clipping indicators in the histogram of mode of development. (Blacks show blue, white and red)

  • Hello. Anyone set black and white points when editing? If so, at what point in the workflow do you do that?

    Hello. Anyone set black and white points when editing? If so, at what point in the workflow do you do that?

    I tend to use after correcting the highlights, shadows, brightness, clarity and contrast may be. In the latest versions of LR you can simply double-click on the word white and black all in now the SHIFT key. Which will automatically define the ends of the histogram. It works fine most of the time, but sometimes I need to go back a little off.

    See this tutorial:

    https://www.YouTube.com/watch?v=_lRkB7oGl80

  • Tecra A3: TV - black and white display

    I have a Tecra A3, which I tried to connect to a TV via the S-video connection. Works, but the TV picture is black and white.

    I tried to change the Graphics Options without result. These are currently on:
    Colors: True color.
    Screen area: 1024 x 768
    Video Standard PAL-B

    Everyone you have any other suggestions?
    Thank you.

    Hello

    This unit has a S-video out. If your TV has only video then you will get only a black and white screen.
    To get a color screen, you have a TV with S-video
    Also, check if the TV works correctly with the standard NTSC video.

    Good bye

  • Tecra A6-EZ6411 - video photo is shrivelled and black and white

    After a recent update to Windows 7 I have a problem with the display of images in the Windows image viewer and watch netflix videos. I can look and onto my computer without problem. I can also display an image in paint.net or any other picture watching a program. I can watch Hulu or any other site of company of cable without problem. What is happening is that the image is overwritten and made black and white.

    So the first thing I tried was uninstall silverlight and then put it back. The next thing I tried was start in basic mode, uninstall all nvidia drivers, then reinstall the latest driver available. None of those corrected these problems. Strange thing is when I first start in basic mode and the resolution is 640 X 480 photos appeared normal in the Windows image viewer and when I try to watch a video on netflix seems normal. Only when I change the resolution to anything else he revert to the old diplay of a black and white display shrunk.

    Hey,.

    You have the same problem with the version preinstalled Windows from Toshiba or did he only because you have upgraded to Windows 7?

    I mean if it works with the screen resolution of 640 x 480, it could be the graphics card to malfunction but a problem of driver too so much easier is to install original Windows of the Toshiba recovery disc and it tests again.
    ?

  • Tecra M5 - external monitor (TV) graphics in black and white

    Hello

    I have my M5 connected to a TV via a SCART (s - video-> adapter SCART).
    Everything works very well (including sound), except that the image is the B & W.
    Whatever I do, I can't get it color.

    When I S - video-> s-video color (in projector) is fine.

    The clues as to what I could do to get a color picture on my TV?
    (M5 2Gb, Xp Sp2)

    TFAI

    Just answer. We're not the assignment of the cable pins SCART. I had the same problem with my TV. There was a black and white photo and I don't know why.
    I checked the contacts and moved the cable up and down and for some reason, the colour appeared. Then I tired 3 cables SCART different and to have worked.

    Maybe it helps.

  • Why embeddable videos JW Player play green or black and white?

    Recently, website of my soccer match point highlight videos have stopped playing in color, but have instead begun to play or black and white with a green tint. I followed all the difficulties that I can see without success. The videos play OK in IE and Chrome, just not Firefox 23.

    Please help if possible.

    Try disabling hardware acceleration in Firefox.

    You can check for problems with the latest version of the Flash plugin and try these:

    • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
    • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
    • turn off hardware acceleration in the Flash plugin
  • Irish critical update needed to solve the problem of black and white tv on the G20!

    I recently had trouble with the implementation of the tv on my Qosmio G20, I was directed in the direction of an issue of black and white affecting earlier models. The solution to the problem was to use the drivers of the g20 and run 2 reg files.

    Having done that I tried all combinations Irish possible, with still in black and white without success, I then tried UK and got the color.

    I mucked with the recording files and found that there is no Irish layout in the file, then when a user updates to Ireland as their situation they will always get black and white.

    The Ireland uses the exact same settings for television as in the United Kingdom, however if a person chooses UK they fall outside the Irish guides or Irish to choose channels amongst (Ireland is not part of the United Kingdom)

    I found the settings for the United Kingdom-

    [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\44]
    @= "United Kingdom".
    "FreqBoundary" = dword:000493e0
    "LB_VideoStandard" = dword:20000080
    "LB_AudioStandard" = dword:00020000
    "LB_ShiftFreq" = dword:00000abe
    "HB_VideoStandard" = dword:20000080
    "HB_AudioStandard" = dword:00020000
    "HB_ShiftFreq" = dword:00000abe

    Thinking the 44, was the dialing code for the United Kingdom (which took a while to understand), I added an entry to register with exactly the same parameters but with the Ireland and 353 above.

    [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\353]
    @= "Ireland".
    "FreqBoundary" = dword:000493e0
    "LB_VideoStandard" = dword:20000080
    "LB_AudioStandard" = dword:00020000
    "LB_ShiftFreq" = dword:00000abe
    "HB_VideoStandard" = dword:20000080
    "HB_AudioStandard" = dword:00020000
    "HB_ShiftFreq" = dword:00000abe

    I now have color tv under the Irish settings in the library, I also make it sound now, where before I didn't. I hope that the code above will add registry files named ttv2_regdata_20050111.reg that comes as part of the correction of pilot http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm to the problem...

    Thanks to jimi in what follows after http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.

    Hope this helps someone...
    laters taters...

    Hi Joseph

    It is very nice to hear that you solved your problem and thanks for the comments!

    Good luck!

  • Satellite A50 432: TV output is black and white

    When I connect my computer to the tv with the s-video to A / converter v that I get a black and white image I tried to change the Pal - B to everything else, but the same thing happening to any idea what is wrong here

    Hello

    Can you please tell me what adapter are you using exactly?
    http://www.nikomp.com.pl/Opisy/AY000/AYVCW12N.jpg or http://www.lenexpo-electronics.com/e_italy/i/AdattatoreScartSVHS.jpg

    I tested my laptop tecra with both of them, and it works without any problem. Make sure that you have used the right channel of your TV.

  • Several games limit left 2/3 of the screen and only game in black and white

    Original title - problem with games

    Five of the eight games on my machine here confined to the left 2/3 of the screen and play only in black and white. It's Chess Titan,

    Free Cell, hearts and Spider Solitaire, solitaire. Ink ball, Mahjong-Titals and Minesweeper work very well. I had the same problem with Netflix, but

    acting on the advice of the Csr Support, I have ununstalled and re-installed Silverlight (and had to use the Fix It program to do it). That solved the problem of Netflix

    but not the problem of games. YouTube has never been touched by this issue)

    Note: these problems two weeks ago.

    Microsoft says my video driver customer service must be updated and that I had to go so the manufacturer (Dell). I can't

    implement this driver in programs and features at all.  I don't know what made everything a video driver. It only concerns the functioning of

    (some) games?

    Any suggestions or info appreciated

    Ed Mac

    Thanks for your reply. I tried to uninstall the games, but the Turn Off function did not cooperate.

    I had the problem, however. An outfit with whom I unfortunately chose to do it remotely

    maintenance, but who are if anything more incompetent than the people of Dell installed on my machine one

    program called "Assistant pilot."  Now, it turns out I had two issues which has the same effect on Netflix and 5 of 8 games, i.e. the image limited to 2/3 of the screen and exploitation of black and white only. The Netflix problem solved when Microsoft Csr Serv me sent suggestions on what to do, which was to uninstall and reinstall Microsoft Silverlight and use the Fix It program if there were problems. Now the outfit I mentioned tried time and time again to uninstall Silverlight without success. It appears that they knew no more difficulty I did. Silverlight was the problem here, because they felt properly.

    The problem of games persisted. Microsoft Csr Serv now told me she looked like my update video driver required and suggested I have call the manufacturer, Dell. God forbid!    I know little about computers. they know less. Then I shortened myself of this pilot, a wizard who bethought

    appears on my menu. I ran the program and it came with 20 + drivers requiring an update. One was a NVIDIA driver and I was vaguely aware that they probably had something to do with it.

    Update Ran, problem solved! Note that people who have installed this program to me do not have

    Consider using it to try to solve what was obviously a video problem! Yikes!

    Microsoft stands out as the good guys here. I had spent hours on the phone with Netflix (very useful, but it wasn't their problem) and this other suit. Microsoft pointed me in the right direction without fees.

  • Canon MG5420 of color instead of black and white printing

    Yes, I read all the similar messages.  Yes, I have a Mac and follow the instructions to use TextEdit to get a printed sample to ensure that preferences are shown in black and white. In the sample of TextEdit, I was able to get a black and white document.

    I have used this printer for 1 1/2 years now without a problem.  Just a few weeks ago, when I print a document to be fair, black and white, it's printing in color or color MIXED WITH black.  Often, it is green with a bit of black or yellow and a bit of black.  When I scan a document or print a copy of a document directly on the Board, it is black and white.  When I print from my computer with Word for Mac or a PDF from Adobe, even if I make sure that the settings are NOT 'default' and the black and white option is selected, prints out in several colors.  I've made sure there's all the new ink in the cartridges, and none are the low toner level.  What to do now?

    Woohoo, Canon technical support with the phone number listed in this thread told me through it all.  It turns out that the head of the nozzle must be cleaned.  There is a small white arrow pointing up at the top of the home screen.  It is not a decoration, as I thought, but if you click on the arrow pointing UPWARDS on the printer controls that access you the parameters Menu.  From there, you can print a focus in color.  In my case, one color appears not at all, even though I had just replaced the color toner in the printer.  It said the tech that I needed to do a cleaning on the menu.  We did it twice and now it's good to go, good as new.  Thank you!

  • black and white printing with a mac

    I've recently upgraded from a Dell Windows PC to an iMac with OS 10.9. I use my old HP 6500e 710 a Officejet All in One.

    In general, I print most of my documents in black and white that was available on version Windows 7 driver.

    On the iMac OS 10.9 driver version, I can print only in black and white in "draft" mode

    Based on another ad I saw on this forum, the drop-down list for a different HP printer (I think than 8300) had the function Select B & W print in any quality. In addition, she had 'gray levels' selectable.

    I seems that my version of the pilot V2.4.0 - 2 does not have the full options compliment. HP needs to update this driver OS 10.9.

    Can anyone HELP!

    happytohelp01,

    I got an answer from HP Support pointing me driver for Apple on the support site software Apple; HP v.2.16.1 for OS X printer drivers.

    This is to "'http://support.apple.com/kb/dl907 '. "   Once I loaded it, I was given the following instructions:

     

    Step 3: Change the print settings

    1 open the document you want to print

    2. click on file , then print

    3. make sure that the correct printer name is selected.

    4. we'll find the orientation option, there are menu drop-down. Select the Type of paper/quality (see the attached screenshot)

    5. click on Color Options.

    6. Select the Grayscale under color

    7. click on print.

    You can create a preset using the procedure below so that you don't have to change the settings every time that you print.

    1. click on menu presets

    2. click on create new preset

    3. assign a predefined name

    4 confirm to create the preset.

    Next time, you can select the predefined name for the settings that you have made.

    This allowed me to print in B & W normal quality.

     

  • Color photos are considered black and white only

    So I took cottage holiday color photos, with my point and shoot digital camera. Just downloaded to computer. The tab 'pictures' are in color, but when I open each photo individually, he appears only in black and white. Help!

    So I took cottage holiday color photos, with my point and shoot digital camera. Just downloaded to computer. The tab 'pictures' are in color, but when I open each photo individually, he appears only in black and white. Help!

    =============================================
    No guarantee... but following Microsoft "don't fix" may be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Windows Photo and slideshow problems
    http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Studio XPS 9100, Ati HD5670, flickering of small format black and white square

    I have Dell XPS 9100 Intel Core i7 CPU 8 GB 64 - bit Windows 7 OS.  ATI Radeon HD5670.  I found a new driver dated December 2014 and loaded.  The small blocks flick went then small black line sometimes appears on both monitors, but it's not the worst of it. This new drive made me all kind of pain.  When the launch IE I get message that IE has failed.  When I open file Explorer it fails also.  I got the drive to a 2010 version and the black line of thinking in the middle of the screen has disappeared but flickering blocks returned.  I did a restore to return six days ago, but IE and Explorer of files are still not.  I really screw that constituent.

    I was wondering if my Radeon video card failed and if you think that it is perhaps the issue which video card would you propose?   At least a new video card would have current reference to the Web site with the current drivers or driver.  I don't do games but want to run three monitors (two running).  This machine is about four years with two internal 1 TB DASD, one Internal 500 GB and a 1 TB external drive.

    HELP me please I'm in trouble AND I THANK YOU for your help.


    I forgot to mention that I ran a Scan of the file as an administrator of the DOS command prompt, I am under MS Virus and Malware full Scan.  There is no longer a couple, I can take as the safe boot mode see if problem persists.  And then perform a clean boot and finally a scan of RAM memory.  I already did a restore of the system 8 days ago.  Guess I can make one "in Place Upgrade' as the last step at least think a person would be better off buying the new video card since this problem of flicker developed a few months previously and not related to my efforts to update HD5670 ATI Radeon driver to the latest version.  It seems almost obvious to me is a graphics card problem, because a change in the Version of the driver to change the shape of video problem scrapie blocks of black and white in the corner of the scree in a detroit thin black line in the middle of the screen.  However technology can be difficult, but does not seem plausible as a problem of video card with the new driver changing the display screen problem but by introducing the serious problem of failing IE and Windows Explorer.  The full scan just finished with a browser quarantined modifier.

    "Point of entry not found. designates the malware has replaced this file.

  • Creating sectional color thanks to the black and white effect

    Hi all!

    Given the beautiful Muse model that uses Parallax scrolling, then at some point, there is what appears to be black and white images with sections of transparency showing the image color below. Someone know how to achieve this effect or maybe a tutorial that could point me in the right direction?

    Here is link to the model in question:

    Fashion Show Preview - ThemeForest

    Jody

    Hi Jody,.

    What kind of effects is applied through some specific widgets which are also made by-

    https://themeforest.net/item/fashion-show/5411127.

    Therefore, you should contact directly or either purchase their theme, as they are already patented.

    Or you can search all of this widget on Adobe Muse Widget Directory

    Kind regards

    Ankush

Maybe you are looking for

  • Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

    Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  • Laptop computer charger plugged in but not charging

    Hello I bought a computer laptop hp pavilion dv6-6154tx laptop computer last month.my, developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging

  • Cannot install Windows XP on the Qosmio F50-108

    I got the Qosmio F50-108 with Vista. I dislike Vista so I tried to install XP.Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I

  • xseubce.dll

    Error Msg: Could not find c:\users\pat\appdata\local\ xseubce.dll Where can I find / install this *.dll and what is it partner?

  • Wireless laptop problem

    Hello yesterday I did a format on my hp pavilion g6 (1217ev) and I install realtek lan drivers but I can not install those wireless that I downloaded a few drivers HP including in their website I try to install them and some of them, both on their ow