Tecra M3 - screen problem double
I have a Tecra M3 with the NVidia drivers installed (using those newer section pilots) and when I activate the option double screen he sets the screen of the laptop as the main screen and opens to all applications on the main screen. I can't change the primary but I put the windows task bar to the second screen, but applications seem to open on the main screen always and even when you move to the second screen, that they should remember where they were last open but they do not seem to. On my old Tecra S1 with ATI, the detected laptop external monitor drivers and the set as primary and then opened the Tools toolbar and on the correct screen applications.
Does anyone know how to get the screens work properly.
I have Tecra S3 and I tested it today and I am very surprised how many opportunities are there to use the device and an external monitor.
I put t know if you're using Replicator port, but in my case, I put external monitor as primary and portable display as windows extended desktop.
I have connected monitor to my Tecra (without Port Replicator)
Using the key combination FN + F5 chose the external display only
Go to display properties and choose display 2 and activate the option windows extended desktop
Every time if the device starts the beginning and the newspaper in the window will be displayed on the external screen. I hope that's what you want, or maybe that I n t you understood right.
Please help me with my problem
Why my logon screen icon double for each user account?
What should I do?
Most likely, this is caused by a 3rd party "software logon." For example, Omnipass is known to cause these 'issues '.
Please take a look here:
I hope this helps.
I have an iphone 5 with screen problems. When the phone turns first of all, I can't drag the screen to enter my security code. The screen is blank. It will take several times before it stand for a long time, just enter the code. I also have problems with the original key. I downloaded the virtual home key, and I'm sure now. However, when the screen is blank, I use the key home, which does not always, to get it back again. It's very frustrating. I'm 1.8 GB for use available, my capacity is 12.5 GB so I don't think that's all. I use the cloud for storage of photos, etc.
Hello. Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.
Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.
More info here:
If these steps do not work, contact Apple and ask for help.
I thing is interesting for any owner of Qosmio to look at this:
My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.
Interesting links! Thank you.
I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems
My satellite 1800-921 has started to give me a black screen after I turn it on. It loads well, go to the desktop and then the screen turns white and I can't make it respond. We can just distinguish the dialogs on the screen so I don't know if it is a screen problem or things I see on the screen are just ghosts...
It's a bit worrying!
Does anyone else have this problem? So far, it seems to happen when I turn it on. Usually, I have to turn it off and reboot to get it back and then it works very well.
to the old series, it may be that the FL inverter is broken or damaged the tupe of backlight. In both cases, you can see the screen but without backlight!
To differi if it is a hard - or software error, you should start the laptop and ESC immediately to enter the BIOS. Then the machine must be running half an hour in the BIOS. When the rupture occurred it is quite sure that some hardware is broken. Otherwise, it is a software based and a restore with recovery CD Toshiba should solve the problem!
My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.
Later, I noticed the screen problem. Can someone help me please on this issue?
Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?
I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
The problem I have is that I have a number of room A210 model PSAFGC.
Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
Don't know what to do. Here is the info of the bulletin.
Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.
-Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
-Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
-Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
-Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40
REF. of the computer it is printed on a label on the underside of the case.
The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.
Here is the link to the page:
I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.
· What operating system do you use?
· You get the error message?
· You are able to boot to the desktop?
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Why my screen is black when I start Windows 7?
Resolve stop (blue screen) error in Windows 7
Our company has recently obtained a TouchSmart IQ506 with Windows Vista 64 bit and everything works fine. We did a cool, been reformatting in the network and ran all the updates and others. As you may, or may not, know, the IQ506 isn't a VGA port to install a second monitor or to connect to a projector, so that to use the TouchSmart mirroring an image to the projector, we bought 2.0 of StarTech USB to VGA Display Adapter. I installed the drivers and got work and mirroring the image properly, however, now I'm having a problem with the touch screen.
The touch screen responds when I touch it, but that the pointer is emptied all the way to the right. Mouse follows my pen up and down with me, but it does not come to the left. It's as if the screen is only read the coordinates there where I touch, and coordinates x are blocked all the way to the right.
The touchscreen was working perfectly fine until I installed the graphics card driver and software for the VGA display adapter to work. The keyboard and the mouse works fine, everything is perfect except for this touch screen problem. I'm 99% sure it's a software problem, and I wanted to know if there is a known issue, or if anyone else has had this kind of problem. I guess this is the software for the VGA graphics card and I was wondering if this is the case, what I can do for the TouchSmart can support a second screen bypassing screen touch, or any other, problems of alternatives.
Sorry in advance if there is already a topic on this issue, I went thorugh the forums and can't find anything about it.
RasterBlaster thanks for your comment.
I wanted to try something before your steps and I seemed to have solved the problem.
The problem is that the nvidia card driver was not cooperating with startech to the VGA graphic card driver. I uninstalled the nvidia card driver and all this work and am now able to see on both screens.
I know I'm going to miss some qualities of video, but from now on, everything works and I think it's what is best. I will try to reinstall the graphics driver, but right now, the problem is resolved. Thank you.
Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.
The size of the window for Hearts is actually design in Windows XP.
However, there is a solution. You can follow these steps:
a. first of all, copy the game.
b. click Start, all programs, games.
c. right-click on the game of hearts .
d. Select Properties from the list.
e. press the button find the target on the next window.
f. right click on the highlighted file and select copy.
g. then paste the copy on your desktop.
h. right click on your desktop.
i. Select Paste from the list.
Finally, we will change the resolution for the game setting:
a. right click on the game you just pasted on your desktop.
b. Select Properties from the list and click the Compatibility tab.
c. put the check box marked "run in 640 x 480 screen resolution.
d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.
Hope the helps of information.
Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).
We can analyze the minidumps if make you it available to the SkyDrive or another file
ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
so time of the BSOD for more information on the possible cause - see TIP.
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
I am confused with my screen problem and need advice.
Vertical line on screen
Shimmering badly centered graphics
Have changed the LCD twice
Changed the inverter and video cable
Latest BIOS. Memory OK
Screen on normal VGA fixed and functions of the laptop normally when using the resources intensive applications.
Where should I go from here?
My HP Pavilion dv2000 is having the dreaded black screen problem. I figured out how do boot mode safe and backed up all my files. Now, I'm ready for this ongoing problem (hopefully). My other laptop HP running Windows 7 never had the problem of black screen. So, upgrade to W7 will fix this problem?
You should not pass the operation when it does not work properly. You can make a difficult to solve the problem, unable to be resolved.
Have you tried last known good configuration or safe mode?
Please note that the problem may be with the hardware and not the operating system.
Hey guys, I'm using windows 7, my laptop these past two weeks have blue screen problems. When I boot my laptop, and I use internet after some cell time but I have a blue screen with MSG (Message Details: to your computer. igdpmd64.sys PAGE_FAULT_IN_NONPAGED_AREA)
If this is the first time that you have, "
Please help me, there are the details:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
More information about the problem:
OS version: 6_1_7601
Service Pack: 1_0
Files helping to describe the problem:
Read our privacy statement online:
If the online privacy statement is not available, please read our offline privacy statement:
Here is an article describing how your problem may be related to a bad Windows Update.
KB2670838 update uninstall can solve the problem for you.
Dell Inspiron 1526 - Windows Vista Home Premium (32 bit) - Service Pack 2 (problem started all with SP1) - AMD Turion (TM) 64 X 2 Mobile Technology TL-60 2.00 GHz - ATI Radeon X 1200 Series
This is probably the strangest problem that I've never seen or heard of. I've owned this phone for about a year and a half without any problem, then one day, I decided to put my computer into sleep mode by closing the lid (I've done several times before without problem.). When I lifted the lid, the computer woke up, but the screen refused to show. Thinking it was an easily solvable problem, I restarted the computer. The computer turned on, but the screen was black. After having turned the computer works enough times (probably 20), finally displayed screen and the error message say 'RTC Mode Fixed. Date and time can be wrong. "I couldn't help but think"What the... ". "I ran into my share of issues of computer before, but nothing as weird as this.
Assuming that everything was fine, I let the computer start normally and shortly after the BIOS, the computer screen suddenly turns off. The only way I could get the boot sequence to pass the BIOS screen and start normally, I had to remove all the devices (including the power cord.) After the computer has finally loaded completely, I was able to function normally. Almost every time that I cut it however, the black screen problem happen again.
A solution will be greatly appreciated.
If you still experience the problem, or if you arrived after doing a search for the same problem with your Inspiron1526 (or other). The solution is to replace the CMOS battery. There was some problems with the connector of the screen becomes loose, but if reinstalling the display connector does not solve your problem, then the battery is dead. The Mitsubishi CR2032 batteries from CHINA are down less than 1.5 volts in only 1-2 years. Looking at the battery that looks like they're a cheap copy of bootleg and probably not at all Mitsubishi. They all have the "Made In CHINA" stamp on the bottom edge. Unfortunately to get to the CMOS battery, you will need to disassemble the laptop computer entire almost to have access, but by replacing the bad battery with a reputable CR2032 3 v battery will solve the problem. After the first reboot, you need to give time for the BIOS to reconfigure and you need to reset the time system and date but the laptop will resume its normal operation after that.
Unfortunately many calls to Dell technical service gave no help to this problem either. Technicians have even claimed to have no knowledge of what the CAPS and the blinking NUM LOCK lights meant. If you are lucky, you may be able to restart a couple times before the laptop doesn't start is not at all, but the time system must be reset - if this happened to you, it's a dead giveaway that the CMOS battery is about to fail. Once you hear the voltage of the battery drops to initial power engage readers and the fan will run for a few moments and then the unit will completely disable. Nothing appears on the screen.
Maybe you are looking for
My 11 flow HP crashed and does not start. I want to download the installer of Windows 10 in order to be able to boot and install from a USB key. Can I download it from the HP site?
Hey guys,. I've had my Equium A110-276 for about 6 months now. Sounds still quite low summers on this topic despite raising the bars of masters and all that, it never reached a record of true. Anyway the main problem is, since last night, sounds, so
Thanks to this link HAD: https://fjallfoss.FCC.gov/oetcf/EAS/reports/ViewExhibitReport.cfm?mode=exhibits& RequestTimeout = 500 &... The good news for me (currently in China Xian) is that it's global phone! Check the photo or the manual for more infor
Hello! Anyone who could help me to reset the bios password of my computer hp compaq mini 110 s/n: (personal information) P/N: VM14UA #ABA MODEL #: 110 C-1100DX Thank you
IM currently on android version 4.4.4 and I want to check for an update. When I click the system updates-> Check for software update, I get this error: "error while the DM session. I always get this error after performing a factory reset. Any ideas?