Tecra M4 - dead battery - is this a BIOS or firmware problem?

Similar Questions

• Upgrading the BIOS on T61 with dead battery

  Can I put the BIOS on my T61 if it has a dead battery?

  I don't know any way to do

• Tecra S11 BSOD after trying to install BIOS v3.1

  Tecra S11 BSOD after trying to install BIOS v3.1

  I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
  Win 7 pro
  Where can I find the minidump to see what file that are the problem?

  C/windows/minidump folder is empty.

  Hello

  Do you get the BSOD during the BIOS update procedure?
  Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

  If you have installed your system, then you should check that the VAP is installed as well.

  Also, I found this info about the update to the BIOS:

  + Attention! +

  + Please close all applications before running the update. +

  + At the end of this process, the computer will be restarted in order to update the EC. +
  + While updating the CE, the screen will not appear and the power LED etc can blink. +
  + The computer may restart several times. There is no abnormal behavior. +
  + Please wait until the computer is restarted fully. +

• Satellite A100: Dead battery + Random closures

  Hello everyone

  I'm having some trouble with my Satellite A100 after taking in a service center and I hope you can help.

  One of the brackets holding the button broke on my laptop so I took it to a service center to replace. Once I come back the laptop I noticed that the battery was completely dead and that my laptop stops after about 20 minutes of playing any kind of video game. I thought that the judgments must be an overheating problem, so I cleaned the fan with compressed gas however it made no difference. What is strange about closures, it is that the fan does not work at high speed until the computer shuts down, and according to a temperature probe, I downloaded that the internal temperature is not greater than 55 degrees. I tried my friend's battery in my Toshiba and it worked, so I know that it's just a dead battery and not a motherboard problem, but I mention that the two problems occurred at the same time and in some sort could be related. I have no idea what is the problem and I can't take to service center because I am currently a student in Finland and cannot afford to be without my laptop for a week.

  Thank you for your help.

  Ned.

  Update: I just upgraded my BIOS from 2.0 to 5.1 and had a mistake on the first boot: 0251: checksum CMOS bad system - default configuration used
  I hit F2 paged through the BIOS settings, then straightened and everything was fine. Should I worry about the error? Or is it normal for the first start after an upgrade?

  Hello

  1.) judgment of problems:
  I'm a bit confused of m.
  Was the laptop connected to the power adapter when the bottom is closed?
  You said you used another battery for laptop you and it worked. So in my opinion, there is a problem with your battery
  Try to replace and check if it works

  (2.) the system CMOS checksum bad:
  It s nothing unusual. The same thing happened to me after that the BIOS updated. I simply set the BIOS settings by default and everything was fine
  Don t worry

• Tecra A9, power - battery is not

  I use a Tecra A9. It is about 3 years old now. But I seem to have a problem with the battery charging.

  Connected to the external power supply is functioning oke. But the battery is not charged. When you remove the power cord, the laptop is running on battery power.

  I removed the battery from the laptop and reinsert the it. Then, it recharges for several seconds, then stops to load again. Remaining in charge is now at about 90%.
  I also removed and cleaned the contacts on the battery and the laptp. But the same thing happened. A few seconds cooldown, it stops to load.

  What could be the problem?

  Thanks in advance for your feedback.

  Kind regards
  René

  > Connected to an external power supply is functioning oke. But the battery is not charged. When you remove the power cord, the laptop is running on battery power.

  I think the problem is the battery.
  It s old and can't hold a charge more. Therefore, replace the battery.

  Check the reference number of this dough... it should be placed at the back of the battery.
  Then, you can google for this part on the net to get the right battery.

  Welcome them

• BlackBerry Smartphones 8130 dead battery / flashing screen?

  Hey all the... I have an 8130, used for a few weeks with happiness, opportunity and then I let my battery choke yesterday. Since that date, when plug it into USB-> PC or the wall charger BB all that I get is the white screen with blue streak through the empty battery. The backlight flashes also - from top to bottom (not extinguished/turned on) on a very regular basis. I had plugged a few hours at work, no change. If I remove the charger, it dies. I tried to hook up w / Office Manager, now that I'm at home, it dosent sees the device. JL_Cmder arrive deviceinfo either. It was not fallen or done it get wet. I just hung my Orb login for the first time and finished streaming videos (very cool btw).

  so... is this just a dead battery?

  I went to Verizon today store to get a new battery, and the guy he said that I have TO buy from them, and they store them. That made me angry so I left without buying a... but is it true? It seems to me that there are a lot of places sell them.

  Thanks in advance!

  You can buy your battery anywhere where they are sold, even an ATT or TMo dealer, you have the same battery, you, who should be the yellow battery C - M2? Even BestBuy has sometimes.

  LET your connected USB and charge for a few hours and then with the USB plugged, remove the battery and reinsert. See if boots and LEAVE longer, load to 100%.

  Tip, don't ever let your dough in less than 15% charge.

  Read this for tips battery: http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• Re: Satellite M35X-S149 - impossible to find a correct battery for this model

  I can't find the correct battery for this model.
  I looked on the websites of Toshiba, but I did not yet find.

  This model does not recognize by finder tool toshiba.
  I will be grateful if anyone has any idea where I can find suitable battery.

  Battery model number is: PA3395U-1BRS

  Hello

  You are already viewing the battery model number.
  Where is the problem? Google for this farm and I m you will get some online merchants who could provide this battery.

  Otherwise, get in touch with the Toshiba ASP in your country and order compatible battery.

• My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?

  My I Phone 6 s incorrect display of battery percentage? everyone knows the same problem?

  Hello dipudivakar,

  Thank you for using communities Support from Apple!

  From your post, I understand that your iPhone displays a percentage of the battery which is incorrect. To resolve this situation, I would first of all turn off the option to display the percentage of the battery on your iPhone. If you need information about how to disable this feature, the following article explains this process.

  Display the percentage of the battery on your iPhone or iPad - Apple Support

  After you have enabled this feature, please reboot your iPhone by following the instructions in the next section.

  Restart your iPhone, iPad or iPod touch - Apple Support

  Once finished, restart, enable the option to redisplay the percentage of your battery and test the question.

  See you soon!

• HP Pavilion Elite m9060n or m9060la Desktop PC Bios and Firmware update

  This computer came with Windows Vista pre-installed

  Now I'm running Windows 7,
  What I downgrade to Vista to update the Bios and the Firmware of my hardware?

  Or the drivers Bios and Firmware Update (.exe files) are fully compatible with Windows 7?

  What suggest you the update in Windows Vista or Windows 7?

  NVIDIA GeForce 8500 GT video BIOS update
  IPIBL - LA motherboard BIOS update
  HL-DT-ST GGW - H10N BD Writer / update the Firmware of the HD DVD-ROM drive

  SAY THANK YOU WITH CONGRATULATIONS

  Macias
  -Please do not use TinyURL my firewall blocks them.
  Click on the star of CONGRATULATIONS on the left, if I helped you. Please mark as RESOLVED, if your question has been answered.

  Hello

  starwarsmex wrote:

  You are right!!!  If it is not broke, don't fix it! But to be honest, I did not play any Blue Ray DVD on my computer, so if a problem exists with the current firmware of the device I need to do? or just curiosity, I'm sorry I lose you, update/upgrade uses the drivers to recommend running the operating system preinstalled in this case Windows Vista?

  If problems exist, then try to upgrade with the appropriate firmware listed in the driver version Vista.

  Some of the improvements will work and others cannot.  It is unfortunate but it is like that between Vista and Windows 7.

  But... If everything works well, change the drivers and/or firmware and invite trouble.

  Best regards

  ERICO

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• Time to update the BIOS and firmware of remote management?

  I'll put up a 'new' ThinkServer RD630 (2954A6U). It was purchased for a project that never happened, and we are now dry and reuse to replace an old Office Server. The current firmware versions are:

  • BIOS: 2.05
  • ME: 2.1.5.73
  • BMC 1.7
  • IPMI 2.0

  Page 61 of the User Guide ThinkServer says, "update the BIOS on your server only if the new BIOS version specifically solves a problem you have. We don't recommend updates to the BIOS for servers that do not need. [...]"

  As far as I know, we have no problems. The system starts fine and runs Windows Server 2012 well enough.

  HERE'S MY QUESTION:

  Should I update the BIOS and firmware IMM (remote management) to the current version? Are there hidden problems, security issues or other concerns that it is worth?

  Other indicators of initial configuration that you can share with a new admin would be much appreciated, too! Thank you.

  With the help of the Lenovo Support, I was able to fix my problem where I couldn't get to the menu of the BIOS of the 630 RD (in F1) and all I saw was a cursor on the screen. I describe the procedure in detail here:

  https://forums.Lenovo.com/T5/ThinkServer-rack-mounted/BIOS-settings-blank-with-cursor-after-BIOS-UPD...

  Thank you to all those who commented above and especially to those who have sent me suggestions via PMs.

• When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  Hi royster677,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your iPhone. If you are having problems with the tone of the text for a specific user, you can check the parameters of Contact of the user (under the Edit button) as shown in the following page of the User Guide:

  Contacts at a glance - iPhone

  If everything looks correct, and you still have questions, you can also check your settings stuck and do not disturb:

  Block calls and messages to block or filter on your iPhone, iPad or iPod touch - Apple Support

  Use of do not disturb on your iPhone, iPad or iPod touch - Apple Support

  Concerning

• Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

  The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

  Next time please indicate what opersting system you first use before describe you your problem.

  You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If for some reason it does not restore the Volume icon, then...

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

  2. for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  Then, follow the instructions from #5 to #9.
  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Go directly to the Option two

  9. to activate the Volume icon

  (A) click on the download button below to download the file below.

  Enable_Volume_Notification_Icon.reg

  then follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.

• After 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear

  Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you

  It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.

  If you hear only on one side, who will tell you that is the question.

  If you hear from both sides, you must obtain a new helmet

  Software will fix either of the foregoing...