Tecra M4 problem with hibernation

Tecra M4 crashes after hibernation starts. Laptop crashes, power market is the only way to recover.
BIOS version 1.60 version hw V4.04.06

Hello

The Toshiba power saver is responsible for standby and hibernation.
I recommend to remove the delete and add energy-saving programs. Then try to install this app again.
Maybe it helps.

Tags: Toshiba

Similar Questions

  • Toshiba Tecra A3 - problem with Port Replikator III

    Hello

    I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

    any help is much appreciated
    Thank you
    Mario

    Hello

    As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

    Good bye

  • Tecra A8: Problem with the USB printer connected to the Port Replicator III

    Hi all

    I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

    I called the technical support of my country, but her is not recorded similar problems.

    A person with similar problem? Some help would be very appreciated.

    Thanks in advance.

    Hello

    Seems like a strange question... Already done the standard procedure in the event of such errors? :)

    The standard procedure is somehow similar to the following:

    -Update your BIOS
    -Update all the drivers for your machine
    -Update your printer drivers
    -Update your operating system

    If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

    Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

    I'd be happy to hear feedback from you on your situation...

    Welcome them

  • Tecra S2: Problems with Linux Live CD after upgrading the BIOS

    Hi all

    A few moments ago I flashed the BIOS on my Tecra S2. Now, my current BIOS version is 2.80. Unfortunately no, I had problems with booting of Linux Live CD like Knoppix or Kanotix. The freezing of the startup process, when the PCMCIA module is tried bo be started.
    What I want to do now is to downgrade my version of BIOS. Is anyone know how it works, and someone has an older version of BIOS of 2005? I couldn't find any older versions on the Toshiba support sites.

    Thanks for all replies!

    Biberkopf

    You re right. On the Toshiba page you will find only the latest version of the BIOS and the older versions are not available on the page.
    In my opinion if you want to downgrade the BIOS question using the service provider authorized in your country.

    But have you checked this site useful:
    http://newsletter.toshiba-tro.de/main/

    There you can get help with installing box machine
    It provides some useful advice to the configuration of the device

  • Tecra M7: Problem with graphics.

    I have a problem recently with my Tecra M7.

    I have unwanted points and lines on the screen and also sometimes the screen is blank or vision pauses for several seconds.
    After my experience with desktop computers, I thought it should be the GPU, but I have no idea how Nvidia NVS Quattro works.

    I recently installed a new Windows XP Tablet to check if a problem with the software, I have also installed the latest gpu drivers of the site so I don't know that this is not a software problem.

    This may happen the other thing that GPU? Is it possible to replace the GPU if there a problem?
    I bought my laptop on Nov 2006, so almost 2 years, how many years is the warranty period for the gpu to the United Kingdom?

    Thanks in advance.

    Hello

    Connect the external monitor to your laptop and see if the problem still occurs. If Yes, I'm afraid there is problem with the graphics card. Unfortunately the graphics card can be exchanged separately. The entire motherboard must be exchanged.

    There is no warranty period for each component material, but for the laptop as a product. It depends on the country of purchase. Try to check the warranty on http://gedb.toshiba.com/

    Good bye

  • Tecra S5 - problem with windows startup

    2 days ago I installed windows 7 on my laptop, my old windows vista with a clear system in shape and I installed the display drivers for windows 7 on the official website of toshiba.

    It worked fine for a day, and then suddenly I got a message saying that the graphics driver has stopped working and the computer crashed.

    After the restart during the windows loading screen shows only blue lines and nothing more happens, he starts not or anything like that. I tried to reinstall windows 7 and install the vista drivers this time, in the hope there is a problem with the drivers, but no luck, it crashed again as soon as I restarted if necessary after installing the drivers.

    Then, given that nothing worked, I used the product for windows XP Recovery disk provided with the laptop, but again after the first reboot, windows not loading not but this time it restarts itself automatically after a certain time.

    Anyone got any ideas what's happening?

    PS: Sorry for the big post, but I'm desperate, because I need my computer for work Monday

    Hello

    I'm afraid this could be a serious hardware problem m.
    To me, this looks like a GPU (graphics chip) problem.
    That would explain the lines on the screen and the problems with the installation of the system.

    It would be the worst case. Defective graphics chip cannot be replaced because it s soldered on the motherboard.

    Well, what to say, you could get in touch with a local technician to verify the parts but I think it is s GPU question

    Welcome them

  • Tecra 9000: Problems with 2nd Battery Pack in Slim SelectBay

    Hello

    When I insert the second battery (PA3074U-1BAT) in Slim Select Bay the battery does not charge and is not recognized by the Tecra 9000 laptop: status led on the front is not lit.

    If I insert the DVD of Tecra drive for example, everything works fine.

    I know that the battery is 100% working since I put it in another Tecra 9000 occurs flawlesly.

    Why doesn't the laptop to work with the second battery? Any ideas?

    Thank you.

    Hello

    I put t knows exactly why the second battery does not work in your Tecra 9000, but I found another display created by your all about this Tecra 9000 and looks that you have disassembled the laptop, and maybe you have damage or not connected something.

    In my opinion, every single computer laptop part should be checked again!

  • Tecra S1 - problems with the touchpad after update BIOS to 2.50

    Hello
    After the BIOS-update to version 2.5, the touchpad does nothing. From the docking station, the l' option option mouse PS2 works without any problem. Starting late, the touchpad no longer works. Normally - before the update - the touchpad began its work immediately after starting not rooted.
    What can I do to reactivate the touchpad?
    Juvenay clevain

    Hello

    Are you sure that your touchpad was not disabled?

    I mean the FN + F9 key combination to activate and disable the touchpad.

    This is why you should check this first.

    On the other hand a 3rd mouse driver part could affect the functionality of touchpad too.

    In my opinion, you should try to reinstall the driver for the touchpad and test it without connected part 3 mouse.

    Good luck

  • Tecra S3 - problems with the new ram in slot B

    Hello
    I have a new 2 GB of ram. When I put it in the slot A (location B is empty) it works perfectly. When I put my old ram (1 GB) in the slot B now and try to powerup, I hear beeps: 1 x long and short 4 x. The screen remains black. Do you know what it is?
    Thanks for your help!

    Hello

    The beeps mean that the POST (power on self-test) could not be passed correctly.

    Your dysfunctions of slit B or the laptop needs 2 modules of memory installed in two slots in order to use the also the second memory location.

    But my assumption is that your second slot may be defective.

    Welcome them

  • Power on Tecra M2 problems

    My Tecra M2 will be commissioned, but the battery is still dead, if I remove the battery and just use the power cord that the machine starts up nice work as it should then just cut, after five minutes.

    Also, it starts with the battery and the power cord but after five minutes, as before but flashes then dies.
    If I let the machine closed to recharge it charges for five minutes before the power supply green led turns off with the amber battery light. Then the power cord light flashes in orange.
    I have to unplug it and remove the battery to make it back to the State of charging.

    The machine was working fine before and runs on xp pro.

    On this virtual path, it is not easy to say what is the problem, but after reading your ad, I think that your Tecra has problem with electronic control gear.
    To be honest I don t think you can do something about it.

    Of course, it can be checked by the service of Toshiba, but I think it's too expensive for this old piece of hardware.
    In my opinion you should backup all your data and sell it on ebay. Someone can buy it to use different hardware components. I think it's time for the new laptop computer.

  • problems with tecra A2

    My tecra a2 crashes sometimes. The screen turns blue, and he said "beginning dump of physical memory. There is no consistency in what I do when this happens. The last time it was because I opened a pdf attachment, the time from before when I was using msn. Last time that the message was: problem caused by: ialmrnt5.
    All drivers are uppgraded.
    I also have some problems with the screen. Both when running on batteries and adapter. The screen seems to "blink" (black towers) for about a half second. This happens fairly regularly and independent of this program that I use.

    When I turn on the computer again everything seems to work normally, but it's really annoying.

    The computer was bought in August, and had this problem all along.

    I am grateful to all those who have comments or suggestions as to what is causing the problem.

    OK, that first of all, the problem occurred while you were playing a game, it is very likely related to your video card.

    Visit the Web site of the manufacturer for a driver update. If that doesn't help, check your RAM.

  • Power On problems with Tecra M11 - 10Z

    We have problems with our Tecras.
    When they are used in the field, the problem is the same on 75 machines and they cannot be turned on at all.

    It is sometimes useful to remove the battery, sometimes it it dosent and the laptop cannot turn on the next two days, and then it works well again until it does it again...

    How can it be, its starting to be a very big problem...

    We have tried to turn off the TPM and they perform the update to the newest bios, they are all running windows 7 pro 32-bit...

    I hope this is enough information because my English is not that great, and I hope that someone has solved this problem...

    Hello

    I noticed that the new BIOS has been released for the Tecra M11 series.
    Try to update the BIOS and check if it could enhance the functionality of s for laptop.

    Good luck

  • 2 problems with my TECRA M2

    I have a Tecra M2

    I have 2 problems with the laptop.

    1 - when I put a second drive (slim) pc not the first choice to open. I get the F1 key to open windows xp.

    2. Another issue that the key (2nd @) do nothing
    When I put on them.

    You know this problem and the solution method.

    Thank you.

    André

    Hello

    verified that you you locale and regional keyboard? In the control panel you can find!

    Also a keyboard cable might be the problem! Can conntact Service Toshiba partner!

    Sammy Bye

  • Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

    I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
    I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

    Is anyone having problems with the new BIOS?
    Should I upgrade or leave intact 3.20?

    I don't find any evidence of trouble with 3,20.

    Why upgrade BIOS if everything is OK?

    In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that

  • TECRA A10 - 11 M - problem with TOSHIBA accessibility

    Hello to the forum.
    I have a TECRA A10 - 11 M (a Greek market system) and after I faced many problems with Windows VISTA
    I installed with Windows XP Professional, the legendary Microsoft OS recovery CD.
    Here I have faced a problem with my buttons of accessibility. My function keys do not work!
    The message is: this system cannot be used "TOSHIBA accessibility.
    I uninstalled and installed again the feature, but nothing happened.
    Y at - it a program known that affect my system and prohibits any accessibility to work properly?
    Can anyone help with this?

    Thank you in advance,
    Vassilis

    _ @ dvass66_
    The FN keys need to installation of common Modules and Hotkey utilities for display devices.
    Common modules must be installed first!
    Also I recommend the update to the BIOS too

    _@korenisko_
    > I think that problem on this laptop is Wifi Atheros card
    I put t know why you think this, but I put agree t
    I have Atheros WLan card and since I use the latest BIOS and WLan driver everything works perfectly.
    Vista turn too stable, but indeed it needs MS patches and update my Vista updates more than once a week...

Maybe you are looking for