Tecra M4-S435 does not start

Similar Questions

• Tecra A11 - 11N does not start after upgrading CPU

  Hello

  I would like to do an upgrade of the processor for my Tecra A11 i5 - 430 M 11N to a probably much faster i5 processor. I thought that the i5 - 580 M'd, but the laptop does not start when I installed this processor.

  I started the 430M, done some research on the internet and discovered that the 580 M has a very high FSB speed, and that is what probably does not work / not compatible with my machine.

  http://Ark.Intel.com/products/43537/
  http://Ark.Intel.com/products/49653
  http://Ark.Intel.com/products/49652

  and also http://ark.intel.com/

  Now, I went back to the computer store, returned the 580M and got an i5 - 560 M compared to its specifications as I've seen it would not compatible because it has the same speed of the FSB with the 430 M.

  I then later in the day tried to install this cpu as an upgrade, BUT alas!
  It STILL does not START ALSO.
  I was dumfounded left. The processors in the same line of the family are supposed to be compatible between them provided: lithography, FSB and socket type are similar.

  Or what I'm missing here?
  I did upgrades of CPU in many cases for desktop computers and laptops, and this is the first that has left me with no word to say!

  Please offer assistance or advice.

  Simon

  + The message has been modified.

  Hello

  Recommend to check this doc from Toshiba:

  + Can I put th CPU, screen, or motherboard in my Toshiba laptop? +
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  Upgrading the CPU is not supported (officially).
  The point is that, even if the chipset would support the new processor, it would be possible that the laptop wouldn't start because of compatibility problems between the BIOS or other components on the motherboard and the new processor.

• Tecra A11-128 does not start - black monitor, only the fan is on

  My laptop starts to boot, a few seconds later, the fan runs all the time and at full power. Here the detailed steps:
  -Push the Start button (battery led is green)
  -the hhd led is green for a short time, then off
  -l' screen is black all the time
  -After a few seconds, the fan starts at full power
  -That deer situation change either, I must break with 5s on the Start button

  I tried several keys (Fn + F2, ESC, F5) while starting up, as an external monitor. Nothing has changed.

  Who has an idea? Thank you very much for your help!

  Hello

  If the start of the BIOS (or Toshiba) screen does not appear, it means that a serious motherboard hardware problem can cause this RAM modules or malfunctioning CPU would be possible
  Recommends checking the memory RAM and CPU modules
  The RAM modules could be replaced easily but it of difficult to replace the CPU and test it. Therefore, it would be a job for a technicians for laptop

• Tecra M2 - Windows does not start correctly

  My computer recently crashed and I suspect that this has affected the BIOS. I believe that the cause was a hardware problem or Trojan horse, as when the computer is restarted it will fail to load the BIOS at all 9/10 of the time. I found the Toshiba Tecra M2 BIOS V1.50 and it says it takes V0.06.00 of Modules common Toshiba, which was more difficult to find and could not solve the problem. Installation of an updated BIOS failure as well.

  For now, Windows loads up with lines running down the screen; When the windows startup failed and by displaying the "Windows did not start successfully screen', some letters are altered," soory for you e afconvenaence, but Wandows dad ngt star ^ correctlq'. "

  A new installation of Windows has failed to achieve anything more. If anyone has an idea how to solve this problem, it would be greatly appreciated.

  Hello!

  I think that it is a problem of material caused by the BIOS or the graphics card.

  However, it s not able to change the graphics card because it s soldered onto the system board.

  Perhaps an ASP can help you and do a downgrade from the BIOS, but I think that you need a new mainboard.

  Good bye

• Tecra A4 sometimes does not start

  Hi all!

  A few months ago, I dropped my Tecra A4 - stupid of me, I know. The hard drive has been damaged without remedy, so I bought a new one, plugged in and set up my laptop again, and it worked fine.

  Last week, however, I went to turn it on - and it didn't. I just got the black screen BEFORE the Toshiba logo, and nothing else has happened. After that, I tried to reformat, recovery, System Restore, etc and nothing seems to work. I can get the HD to start with a strong pressure on the laptop, which makes me think it's a problem of connection between the HARD drive and the card mother, but then again - no way to verify.

  Anyone had a similar experience, or can offer suggestions? I'm a student so I can't really afford a new laptop.

  Thank you!

  Hello

  In my opinion this malfunction is the result of the laptop down.
  Who knows what may be damage. Everything looks like something wrong with the motherboard, but maybe what it s just a little, tiny part that hurt so bad.

  However, the fault is found only by a technician of the laptop. I would recommend so contact the service provider in your country for a control.

  By the way; have you tried to remove the battery and unplug the power adapter for a while? Not? Well, I would recommend this doing.
  Remove the battery, disconnect the adapter and wait several minutes (about 20 min). Then connect everything again and tries to start the machine.
  Maybe it helps.

• Tecra A9: Windows does not start after you turn off multiprocessor in BIOS

  I use a Toshiba Tecra A9 with a Core 2 duo. I need to change the bios setting to run a special program, "multiprocessor: disable. Now, I've changed back to the bios setting "multiprocessor: activate ' and win xp stop start after login. With "multiprocessors: Disable" the computer starts normally. If I press F8 after starting the computer and select save mode, the computer starts.
  I don't have any idea what I can do to solve this problem.
  Any ideas?
  Thanks in advance.
  Ulli

  Maybe the ACPI-Multi CPU driver was not installed correctly or a MS patch is necessary.
  I read on some similar topic websites.
  It is very important that the XP SP2 has been installed and other patches.

  At this time the new Win XP SP3 is available. I think that this is a beta version, but I already installed it on my XP OS.

  So maybe you should enable the multiprocessor option in the BIOS then you need to install the XP again. Then install all available Ms patches, fixes and eventually the SP3 too.

  Then check again.

  One question; Are you using the newest BIOS?

• Tecra 500 CDT does not start. Please help with CP

  Hi all

  I have an old Tecra CDT of 500 which, up until yesterday, worked fabulously. Now for some reason it starts at all. No matter how long you push the Start button on the side, he shows no signs of life at all. It's been hot here lately so I wonder if it's suffering "heat exhaustion! Seriously, clues as to what could have caused this problem and how to overcome it would be greatly appreciated. It has been used much more recent than usual and for hours. Is this likely to have helped him give up the ghost?

  I hope someone out there can help.

  Thank you
  Dynamo-dom

  Hi Dominic,

  It would seem that your laptop has developed a hardware failure, either with the current power switch the PSU internally. I think that your only action now is to contact a service partner and ask them a price that it be repaired.

  Good luck

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Tecra M2 does not start

  I'm new havoing problems with my Tecra M2. can someone point me in the right direction with regard to breakdowns, I had a glance on the forum and the threads associated with the Tecra range but cannot find all threads that match my problem.

  In a short time, less than three days, I had a problem that began with the laptp re start when it has been moved to now does not start at all. All the lights are what I expect of them with the exception of the HARD drive indicator, that does not illuminate at the start of the boot sequence. Does that mean that my HARD drive or the connection at the disk has failed, measures of observation of fault that I can follow to confirm or deny my fears would be greatly appreciated.

  Hello

  If the HARD drive is faulty, then you should not be able to start the operating system, but you should be able to see the BIOS splash screen.
  You see that? Are you abele to access the BIOS?
  Please check this!

  To access the BIOS ESC and F1 press immediately after the laptop has been powered! If this is not possible then there might be something wrong with the motherboard or any other piece of hardware like RAM.

  If you are able to access the BIOS, then you should check if the HARD drive is recognized in the BIOS.
  You can also use the tool called Drive Fitness Test to verify the HARD drive!

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• After the motherboard replacement Tecra S2 does not start

  Hello

  I replaced the motherboard in my Tecra S2 and now it does not start, the power light is on but nothing on the screen. I can hear the h/d running DVD lights.
  I tried to remove the RAM.
  Also checked the CPU and still nothing.

  NEED HELP.

  Are you sure that the display is OK and correctly connected?
  Is busy, I mean drive HARD HDD LED flashes?

• Tecra M2 does not start - the power light AC blinking orange

  Someone at - it a list of codes for the Tecra M2 flash.
  My friend has a laptop that does not start at the top. the AC power LED flashes orange. a long, short, long, short, long, short, long, short.

  I checked the battery and reinstall the RAM.
  Any IDE?

  Hello

  I agree with go.
  The ASP would be able to tell what means error.

  Usually means short and 1 long: 0
  So the error must be: 1010 1010
  Due to the last significant bit (LSB), to be read by behind:
  So it now means: * 0101 0101 binary *-> it must be converted to hexadecimal-> * 55 Hex *.

  Then, you will get a hex code.
  But unfortunately, I m not very well which could mean this code

  So ask ASP for help!

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• Re: Tecra S5 does not start

  After the upgrade to win7 and sometimes having a blue screen when you start the following happened.

  After blue screen once more, laptop is not starting at all.

  The only thing that happens is that I see the upstartscreen (in touch with tomorrow TOSHIBA) and the icons at the bottom of the screen indicating the readers. Nothing happens any more, it does not start doe.

  I can change by tapping F12 in a new boot through the CD rom boot procedure, but there is also no effect.

  Also, it is not possible to enter the bios (esc + F1).

  The keyboard works because, after a while each touch result is a short "beep".

  I removed the battery for a while and tried again with no results.

  If I can put my laptop by the ore basket is there a possibility to bring it to life

  Thanks in advance, Jos

  On this virtual path, it is not easy to offer an accurate diagnosis, but somehow, I feel THAT BIOS is doomed.
  Unplug the AC adapter / CC, remove the battery and press the power for 20 seconds. After doing this only connect the power supply and restart your laptop.

  I don't have this model of laptop and I'm not sure to get into the BIOS but try also with F2.

• Tecra A10 - 16 d does not start

  Dear forum members

  The laptop above lights up but does not start. The power of the orange light flashes twice and then green.

  Please someone knows what could be in this case.

  Please anyone know if this particular light flash sequence indicates anything in particular.
  Any help would be greatly appreciated
  With our thanks
  Ian

  The same happens when you remove the battery and start computer laptop with AC power only?