Tecra M5 - DVD - Ram is not recognized

Similar Questions

• Equium A60: DVD - RAM, being not recognized correctly

  Hiya!

  I have an EA60 and my carpet * a DVD-RAM UJ-820 s is currently not recognized by the laptop properly. When I go to device drivers, he said the driver has been loaded but returns the error code 41. I reloaded the Driver and the device, and it makes no difference.

  I also bought a new Pioneer DVD-RAM and it comes up with the same error code.

  Can someone help me please?

  [email protected]

  Kind regards

  Gary

  To start the registry editor
  Click Start, run, type regedit, and then click OK. Start the registry editor.

  Then follows the steps described above.

• Re: CD/DVD drive is not recognized correctly on my Equium P200

  I recently bought a laptop P200D and now, I found that the CD/DVD drive is not recognized.

  In Device Manager the drive icon has a yellow on exclamation and in the wealthy area it says "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried uninstalling the drive and then to restart the laptop but it is has not been successful. I recently downloaded and installed the Service Pack 1 for Vista and I have read that there have been problems with device drivers and wonder if there is such a body?

  Are there updated drivers available for this device?

  Thanks for any help you can give.

  Lester Mortimore

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=113742 please

  I hope this will help you.

• DVD player is not recognized correctly - Equium L100

  Can help any 1 Please my DVD - RW is not recognized in my system. Sometimes I boot and it is there, but other times I start up and it is not shown in my computer or Device Manager
  
  Seriously frustrated.

  Hello

  Please try this http://support.microsoft.com/kb/314060/en-us

  Is the DVD drive in the device with the yellow exclamation point Manager?

• CD/DVD drive is not recognized on Satellite Pro L10

  Hello. can someone help me with the following: -.

  My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

  the (r) drive is shown as TSST Corp TS-L462A - can I get the update
  Download Driver from the site? (is it free?)

  Thanks for any help

  Paul

  Hi Paul,.

  You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

  However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

  Kind regards

• Satellite L30 PSL33E: After downgrading to XP DVD-RAM does not burn

  My laptop (Toshiba Satellite L30 PSL33E) provided with Windows Vista but it is very slow with this OS and one of my friends downgrade my OS XP.
  But now my DVD-RAM does not burn!

  Install the driver DVD - RAM Toshiba v the European driver Toshiba page 5.0.2.5

• DVD rw is not recognized as writable.

  DVD rw is not recognized as writable. Difficulty of MS used. Did not work. installed a new drive. still not recognized. any other ideas?

  Hi jp1681,

  ·         This fixit did you use?

  ·         The drive to read but not write disks?

  Method 1: We will uninstall the DVD drive in Device Manager and reinstall.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Method 2: Log on to the manufacturer of the DVD drive and install the latest updates from driver\firmware.

  Method 3: If you are not able to read any DVD, check if you have followed the article mentioned below.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• CD/DVD drive is not recognized by Windows or other programs. HP Pavilion s7310n Slimline PC

  He used to work. It comes from when the computer was around the age of 4 months. should have put in, but could not take the days off to bring it back to BEST BUY - 2 years ago.

  Then... the CD/DVD drive is not recognized by Windows or other programs. If I insert a CD as Photo Suite III or any what CD/DVD, the green light comes on but no rotation and not even a warning to error.

  Now what? How can I find out / know the specs of what to look for a replacement/new one... I lost the book in my move to Florida. I have tried all sorts of key word in GOOGLE and I am half blind and tired to be re-directed to sites that have nothing to do with my question.

  Can someone help me please? Thank you. TJ Rev.

  PS... None of the links in the Solution of Sissy2 DIFFICULTY to where they are supposed to. I don't think it's my problem anyway.

  MY CD/DVD drive is dead.

  Message edited by aalienlady on 05/21/2009 21:32
  Message edited by aalienlady on 05/21/2009 21:32

  Download XP_CD-DVD - Fix.zip and save this file on your hard drive. Navigate to where you saved it, and double-click the file to extract the content. Find the EXE file that you extracted and double click it.  A confirmation dialog box appears when the script is done.  You may need to reboot for the change to take effect. Works on XP and Vista. Good luck!

• DVD RAM does not

  HP DVDRAM GT10L ATA stopped working. Device manager shows yellow mark. in the properties shows device can not start (error code 10). Uninstall and reinstall the drivers moved. Help, please.

  Thanks, Niranjan, I already did, uninstall, then by restarting computer, but at the start it starts the installation of the driver and is unable to do so. in Device Manager, it says device cannot start (error code 10). Thank you

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you are facing problems with your DVD ROM. I will certainly help you to question.

  As you have already tried suggestions provided by Niranjan, I suggest you check out the link below:

  https://support.Microsoft.com/en-us/KB/943104

  You can also check out the link below:

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information helps.

  Meet us with the State of the question.

• Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

  Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

  The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
  Could someone help me?
  -The pilot is the last in line.
  -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
  -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
  -My OS is Windows 7.
  -A restore factory settings did not work at all.
  Thank you.
  Claudio Nahmad
  Mexico City

  Hi, Claudio Nahmad,.

  This error can occur if the data in the registry for the device and its driver has been corrupted.

  Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  You can also try to install Windows updates, including optional updates driver and check if that helps.

  Install Windows updates in Windows 7

  Hope the helps of information.

• Tecra M5: UJ - 841 s not recognized as DVD/RW by any burning software

  I've seen on other posts that it is common that the drive to be identified in Device Manager as a DVD-RAM (which is what's happening) but my DVD multi (on a Tecra M5) burner is not recognized by any DVD burning software.

  Is there an update or driver that I should have?

  Thank you

  Hello

  My first question: do you use the Toshiba OS since the Toshiba Recovery CD?
  Have you install and use multiple applications all burning?

  To my knowledge the practice he s not advised to use burning different programs together.
  You must use only one. I recommend Nero. It s nice.
  If the sonic is installed on the HARD drive, try to remove it and use only nero.

  If the drive is not able to manage DVD media, you should check the different brands.

• Tecra M5: DVD player does not read these mini DVD

  I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.

  Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.

  All the other standard size DVD, CD works good about it. Its complex and as well as irritating.

  Any suggestions?
  Why his messedup?

  Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
  Try the sascha. Maybe you are a lucky man, and it works.
  If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
  Then stops again, put the drive in the notebook and the startup of the device.
  The laptop should recognize the drive and must indicate the firmware again.

  I don't know if this will help but it s attemptable m

• Satellite M100 - DVD-Multi drive not recognized as an engraver of CD/DVD (!)

  Hello

  After the installation of Win XP SP3 in the last update of windows, Toshiba tools, but also other CD/DVD burning software don't recognize this title, the drive from DVD - ram only as a CD-rom drive.
  Thus, software such as recordIt does not work.

  I have already deleted the drive in the list of material and have reinstalled.
  The driver being used is 'Mat * a DVD - RAM UJ - 841S'
  That's right, so far. But it's not burn CD/DVDs.

  A have you noticed this problem as well?

  Thank you.
  Bjoern

  Hello

  I think that it s a lower upper filter question and I think that you could solve this sequel to this instruction step by step.

  First remove the player of ODD (CD/DVD) from the list in Device Manager.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, you must restart the device.

  Once again, windows will recognize the STRANGE

• Satellite M40X - DVD drive is not recognized

  I bought a new satellite pro m40x yesterday and today everything worked fine but today the dvd and cd rom is not recognized more. I don't know about cell phones, what can I do? I don't want to return it to Toshiba and wait 4 weeks to get it back.
  My son needs the notebook the week next to the school.

  Hi Christine,

  Please check in the Device Manager to see if there's anything showing against your CD-ROM drive. If your CD-ROM is always displayed, you should be able to run the process of troubleshooting against it to check for possible errors.

  If your CD-ROM is more listed and then launch the 'Scan for hardware changes' option to see if it detects your CD-ROM.

  HTH

• RAM is not recognized on Satellite L650-1MC

  Hello guys

  I have a Toshiba Satellite L650-1MC with an i5 480M CPU and 4 GB DDR3 PC3 - 10600 (2 x 2 GB modules). Today, I got a 4 GB of DDR3 PC3-8500 module to upgrade the RAM 6 GB. I put this new module in and he was not recognized, perhaps because it was PC3-* 8500 * not * 10600 * like the original other two modules.

  However, when I tried to put one of the modules of 2 GB DDR3 PC3 10600 original in once again, he was not recognized or the other! I then left the second empty slot, with nothing in it, and he acknowledged the 1 module 2 GB in there. Do you intend the PC3-8500 module "corrupt" the memory slot, or is it not positioned properly, as seems to be slotted into a fine; It will not move.

  I would really appreciate your help

  Tom

  Hello Tom

  There must be a compatibility problem. Forum is filled with similar reports. You should only use compatible and tested modules.
  I highly recommend to use modules from Kingston.
  Compatible RAM for your laptop model you can find on http://www.ec.kingston.com/ecom/configurator_new/lines.asp?root=uk&LinkBack=http :// www.kingston.com/ukroot&Manufacturer=tos&search_type=

  If you need assistance, you are prompted.