Tecra M5: Is it possible to connect two monitors?

Hello

Is it possible to connect two monitors the Tecra M5? Is it possible through the port replicator, perhaps by a split of dvi output or a dvi, one on the vga monitor. I want to divide between the two monitors.

At soon now
Iain.

Hello

No, it's not possible to connect two external monitors.
If you want to split the screen, you can use the extended desktop option.
In display properties, you will find the option to extend my desktop on this monitor. You must select the second monitor and activate this option.

Tags: Toshiba

Similar Questions

  • Satellite L850 - is possible to connect two monitors external simultaneosly

    Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.

    I want to use the outputs existing.
    Thanks in advance

    Some laptops supports a dual output: for example the Qosmio X 500 as shown here:
    http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

    But for Satellite L850 this isn t possible.
    But you can use an external device, such as Dynadock
    http://www.Toshiba.com/us/ACC-dynadock

  • Connect two monitors on HP Pavilion a6030n

    My office was purchased in 2007 and has the onboard nVidia GeForce 6150SE nForce 430 graphics. Is it possible to connect two monitors to this system?  There is only a single RGB connector on the back which is connected to my flat screen HP vp17 monitor.

    Tuna, no.  Should upgrade you to a dedicated with two video ports video card (1 VGA port, 1 DVI or DVI 2).  According to the use of the computer, the video card may require an upgrade of the power supply, also.

  • HP EliteBook 8570w: is it possible to run two monitors on a 8570w without a docking station.

    Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.

    I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.

    And thanks for the quick reply Provost.

  • Connect two monitors to my laptop HP

    I have a laptop dv7 HP Envy.

    Windows 8.1

    Inter Core i 7-3630QM [email protected] GHz

    16 GB of Ram

    64 bit

    1 TB HD

    Intel HD Graphics

    NVIDIA GeForce GT 635 m

    2 monitors:

    HP w2207h W? : 1 - HDMI. 1 VGA & 1-USBin.

    2 - Out USB

    Monitor 27 '' LCD HNC

    HDMI 1

    HDMI 2

    VGA

    I would like to connect two monitors to this laptop. The laptop has: 1-HDMI; 1 VGA.

    This seems to be a slam dunk, it's not. They put the VGA and HDMI so close together that I can't connect both at the same time. It's as if they force the VGA or HDMI. I am a general contractor and need two monitors if possible. I look at work photos on an all in utiizing a drawing program to produce plans of work on another.  There are 1/4 "between the VGA and HDMI imput plugs I would have been Golden, but they did not. Can anyone suggest a way to get these two monitors plugged and upward and running.

    Thank you

    Perrys6

    Ahhhhhh.  Hey all what works.  I had not thought that.

  • connect two monitors

    I have a 2009 mac with a video card that has a mini port and and Dual port and I want to connect two monitors, how can I do that, I have a monitor with a mini port that is already connected, how do I get a different view to fit with this video card? I can't find adapters to get there because the Dual mini adapters, the mini is male. and a male connection will not work.

    Hi, I'm a bit confused, the two video ports are 'Mini', one is Mini Display Port, the other MiniDVI...

    Apple Mini DisplayPort to DVI dual link

    Part: MB571Z WW (except China, Taiwan and Korea); MB571FE (in China, Taiwan and Korea)

    Use: Use the Mini DisplayPort to Dual-Link DVI to connect your Mac to a 30 inch display that includes a DVI connector, such as the 30-inch Apple Cinema HD display.

    Compatible with:

    • MacBook Pro (retina, 13-inch, late 2012) and later versions
    • MacBook Pro (retina, 15-inch, early 2013) and later versions
    • MacBook Pro (retina, mid-2012)
    • MacBook Pro (13-inch, mid 2009) and later
    • MacBook Pro (15-inch, Late 2008) and later
    • MacBook Pro (17 inch, early 2009) and later
    • MacBook (13 inch, late 2009) and later
    • MacBook (13-inch, aluminum, late 2008)
    • MacBook Air (late 2008) and later
    • Mini Mac (early 2009) and later
    • iMac (20 inch, early 2009) and later
    • iMac (24 inch, early 2009) and later
    • Mac Pro (early 2009) and later

    Apple Mini DisplayPort to DVI (Single Link)

    Part: MB570Z WW (except China, Taiwan, Korea); MB570FE (in China, Taiwan and Korea) use: use the adapter Mini DisplayPort to DVI to connect a digital monitor advanced, such as the Apple Cinema Display 20 or 23 inches, which includes a DVI connector.

    Compatible with:

    • MacBook Pro (retina, 13-inch, late 2012) and later versions
    • MacBook Pro (retina, 15-inch, early 2013) and later versions
    • MacBook Pro (retina, mid-2012)
    • MacBook Pro (13-inch, mid 2009) and later
    • MacBook Pro (15-inch, Late 2008) and later
    • MacBook Pro (17 inch, early 2009) and later
    • MacBook (13 inch, late 2009) and later
    • MacBook (13-inch, aluminum, late 2008)
    • MacBook Air (late 2008) and later
    • Mini Mac (early 2009) and later
    • iMac (20 inch, early 2009) and later
    • iMac (24 inch, early 2009) and later
    • Mac Pro (early 2009) and later

    Apple Mini DisplayPort to VGA

    Part: MB572Z WW (except China, Taiwan, Korea); MB572FE (in China, Taiwan and Korea) use: use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector or a LCD display that uses a VGA connector or cable.

    Compatible with:

    • MacBook Pro (retina, 13-inch, late 2012) and later versions
    • MacBook Pro (retina, 15-inch, early 2013) and later versions
    • MacBook Pro (retina, mid-2012)
    • MacBook Pro (13-inch, mid 2009) and later
    • MacBook Pro (15-inch, Late 2008) and later
    • MacBook Pro (17 inch, early 2009) and later
    • MacBook (13 inch, late 2009) and later
    • MacBook (13-inch, aluminum, late 2008)
    • MacBook Air (late 2008) and later
    • Mini Mac (early 2009) and later
    • iMac (20 inch, early 2009) and later
    • iMac (24 inch, early 2009) and later
    • Mac Pro (early 2009) and later

    Apple Mini-DVI to S-video/Composite adapter

    Part: M9319GCompatible with:

    • MacBook (13 inch, late 2008)
    • (13 inch, early 2008) MacBook
    • MacBook (13 inch, late 2007)
    • MacBook (13-inch, mid 2007)
    • MacBook (13 inch, late 2006)
    • MacBook (13-inch)
    • iMac (early 2008)
    • iMac (mid 2007)
    • iMac (late 2006)
    • iMac (early 2006)

    Apple Mini-DVI to DVI

    Part: M9321GCompatible with:

    • MacBook (13-inch, mid 2009)
    • MacBook (13 inch, early 2009)
    • MacBook (13 inch, late 2008)
    • (13 inch, early 2008) MacBook
    • MacBook (13 inch, late 2007)
    • MacBook (13-inch, mid 2007)
    • MacBook (13 inch, late 2006)
    • MacBook (13-inch)
    • Mac mini (late 2009)
    • Mini Mac (early 2009)
    • iMac (early 2008)
    • iMac (mid 2007)
    • iMac (late 2006)
    • iMac (early 2006)

    Apple Mini-DVI to VGA

    Part: M9320GCompatible with:

    • MacBook (13-inch, mid 2009)
    • MacBook (13 inch, early 2009)
    • MacBook (13 inch, late 2008)
    • (13 inch, early 2008) MacBook
    • MacBook (13 inch, late 2007)
    • MacBook (13-inch, mid 2007)
    • MacBook (13 inch, late 2006)
    • MacBook (13-inch)
    • iMac (early 2008)
    • iMac (early 2006)
    • iMac (late 2006)
    • iMac (mid 2007)
    • Mac mini (late 2009)
    • Mini Mac (early 2009)
  • I have a macbook pro mid 2012 and I want to connect two monitors

    I have a macbook mid 2012 pro and I want to connect two monitors.

    as you know, I have a firewire port, port a thunderbolt and two usb ports.

    You can connect in series two screens Thunderbolt to your MacBook Pro.

  • HP Pavilion 020na-300 Mini PC: connect two monitors for HP Pavilion 020na-300 Mini PC

    What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

    1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?

    2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?

    RSFSS, welcome to the forum.

    Here's a guide that should help you with your problem.

    RSFSS wrote:

    What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

    1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?  If you do not already have the monitors, I definitel would get both of them with HDMI connectors.  You will need a DP to HDMI connector:

    http://www.Amazon.com/GP/product/B004C9QST2?gclid=CJDQqtv1rsoCFZBcfgodha4DDQ

    2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?  The Guide I've provided assistance with this procedure.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Can I connect two monitors to a PC Tower? cc = us

    Can I connect two monitors to a PC Tower?

    Yes, you can connect two monitors to a PC Tower... but your PC should have several outputs that are concomitant supported and your monitors must have matching entries to make it work. If your system does not support multiple and simultaneous outputs there are other options to solve this problem.

    Frank

  • I want to connect two monitors, but there is only a single port VGA on my PC. How do I plug in the other?

    Only a single port VGA on my PC

    I want to connect two monitors, but there is only a single port VGA on my PC. How do I plug in the other?

    Friday, June 22, 2012 14:19:44 + 0000, CSAChi wrote:

    I want to connect two monitors, but there is only a single port VGA on my PC. How do I plug in the other?

    You must buy a second video card or replace the one you have
    with a card that takes in charge of two monitors.

    Ken Blake, Microsoft MVP

  • Dell XPS 8500 with 1 GB AMD Radeon HD 7570 - how to connect two monitors or?

    Hi, I got my Dell XPS 8500 today with the 1 GB AMD Radeon HD 7570.

    Before buying the office, I read online that the AMD Radeon HD 7570 supports Eyefinity.   Eyefinity is supposed to be capable of supporting 4 monitors using the HD 7570 map by the description here: http://www.amd.com/us/products/desktop/graphics/7000/7570/Pages/radeon-7570.aspx#2

    When you look at the photos of the Dell XPS 8500 online I thought that Eyefinity support was to use a display in addition to the DVI port Port.   Specifically, I thought that a monitor has been supported by DVI monitors while 4 thru two supported using an active connection to the view port using a product like the DisplayPort Accell UltraAV K087B-005 / 3 x multi-monitor DVI - D single-link adapter.

    To my surprise the graphics card came with an HDMI port, not a display port and I believe that HDMI port is a connection from one to the other, and not one of many display connection.   Maybe someone can correct me if I am wrong on this point.   But if I'm not wrong then, this would imply that, at most, the Dell XPS 8500 with the AMD Radeon HD card 7570 can support up to only 2 monitors (one DVI port) and the other HDMI port instead of 4 monitors as described on the above link.

    Others would agree with this statement?

    Note that the Dell XPS 8500 also has a VGA connector on it but I tested it using a monitor on VGA and a monitor on the DVI connection and the computer that reported as an invalid monitor config.   Probably because the VGA and DVI connections are originally the same video display as connect two monitors to display even has no logical sense.

    I have not tested the HDMI port for the second monitor again mainly because I don't have a spare HDMI cable on site at the present time.   I'll probably buy one tomorrow unless I see the comments of my post, specifying that a second monitor can be moved through the HDMI port on the AMD Radeon HD 7570 map...   I'd be surprised if that were the case (1 monitor system would be quite restrictive), but it is difficult to say with certainty, because the VGA and DVI connections at the same time have been marked by the computer as an invalid configuration...

    Any thoughts on the different ways to configure multiple monitors with the XPS 8500 and the 1 GB AMD Radeon HD 7500 is appreciated.

    Thank you.

    Doug

    If the card is not a display port is not an eyefinity card and cannot stand 3 monitors... it will be 2 monitors, no problem... I couldn't find anywhere on the site of Dell, where he says that the card was eyefinity... If you want 3 assumption of monitors you can buy a video card that supports.

  • Can I connect two monitors desktop Dell Inspiron i660-5041BK?

    I am looking to buy desktop Inspiron i660-5041BK but need to connect two monitors to it.  I think I can with the HDMI and the regular monitor port.  What do you think?

    KateMcphee

    I am looking to buy desktop Inspiron i660-5041BK but need to connect two monitors to it.  I think I can with the HDMI and the regular monitor port.  What do you think?

    Can use something like this HERE, or HERE, but it would be better to put a map, where you will have a better choice of connectors. I that you intend to use the HDMI, then you will need a something similar to what I proposed to make it work.

  • Need a graphics card to connect two monitors.

    Is AMD CrossfireX and Nvidia SLI is the only way to connect two VGA?

    Original title: graphics card...

    It is not no need SLI or XFire to connect two monitors. SLI and XFire are mainly to
    improve performance by connecting the two cards together.
    SLI, to have the same model of card when you use Nvidia IE - two GTX560ti, but apparently, you can use different templates with XFire as long as they use the same gpu (it's because they sometimes "re-brand" a gpu a series on a new map in the following series).

    You can connect two monitors to a card and run games on two monitors, but the seam in the
    Middle is a problem, so it is really best to go three monitors or a larger screen.
    You can also run a game on one monitor and have something to open on the other.
    This can also be done with two cards of different model that are not related (Nvidia or ATI).
    or your integrated graphics, if you and a single graphics card.
    You can also use both outputs of an integrated graphics card to perform the duties of Office Basic
    two monitors.

    To use a combination of graphics card integrated on my machine, I have to set the graphic option and dedicated North Bridge in the BIOS to "Onboard" or the integrated graphics card will not work.
    Also, when you use a single monitor I have to choose one or the other in the BIOS as only won't work
    at the same time when you use a single monitor.  It may be different on your system.

    There are different ways to use two monitors and the Setup is different between Nvidia and ATI.
    I've only played with Nvidia, ATI and Intel HD4000 options, so cannot really elaborate on
    the installation options.
    It is probably better to play with the settings of your cards some time control panel to
    get an idea of what is what and try again forum of the mfg graphics card for more details.

  • I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

    Original title: multiple monitors

    I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

    Hi David,

    Thanks for posting your query on the Microsoft Community.

    I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

    Check out the link:

    http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

    You can also check:

    http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Slow refresh rate using a D3100 connect two monitors U2311H

    Hello

    I have a macbook pro 2016 and bought the Dell D3100 triple display USB adapter to use with it. The two monitors are connected to DVI using adapters connected to the displayport and hdmi ports. I installed the latest drivers from displaylink for El Capitan on the computer and plugged the dock on USB 3.0. The two monitors work. However, they all seem to have some considerable delay. Testufo indicates that they are both running at 60 Hz (as well as the display settings), but movement seems choppy and fuzzy, akin to 30 hz, but maybe a little better.

    I read that it would be able to run monitors 1080 at 60 Hz with little trouble. Is there something I am doing wrong?

    Thank you

    We didn't test the D3100 on Apple hardware or software is a big unknown.


    The slow refresh rate tells us that they're not really running at 60 Hz.

    The U2311H has the following ports video =.
    DP 1920 x 1080 60 Hz
    DVI 1920 x 1080 60 Hz
    VGA 1920 x 1080 60 Hz

    The D3100's video next ports =.
    Display Port 1.1 = 3840 x 2160 30 Hz, 1920 x 1080 60 Hz
    HDMI 1.4 = 2560 x 1440-50 Hz

    So the U2311H using DP 1. 1 a/DVI should be 60 Hz. The other at 50 Hz. But how the Apple operating system is to see these is unknown. You must post on the Apple Forum of Discussions and see if they can offer an overview or troubleshooting steps.

Maybe you are looking for

  • Problems connecting to wifi at home after ios update.

    Hello I need help I have updated ios on my mac, ipad and iphone two nights ago, and since then, I was not able to connect to my home wifi at all. I tried all solutions fast restarts etc but nothing works, and it's super annoying. Thank you very much

  • TouchSmart 520 TV tuner stopped working

    I have a 1190EA Touchsmart 520. I have recently upgraded to Windows 8 to 8.1 Windows and now the TV tuner stopped working. I've already used Windows Media Center to watch TV. I ran install MCE and windows MCE is unable to find all channels. My TV car

  • How is a change the Keychain password?

    I am a rookie having recently switched to Mac from Windows and were not able to understand how to change my password in the keychain.  I have OS X El Capitan and would appreciate any help you can provide.  Thank you!!!

  • Satellite A200 - inactive keys: CTRL, SHIFT, PG. PREC, PG. NEXT, HOME, END

    Hello I have a Satellite A200 and there is a week, some of my keys just stopped working.All the keys CTRL and SHIFT (left and right), PGUP, PGDN, HOME, END, are inactive. I uninstalled the keyboard from the Device Manager and autoreinstalled to start

  • How to stop Microsoft Narrator to run when I start Vista Business

    I'm simply Microsoft Narrator is running whenever I restart Vista Business.  I always leave the program when it starts, but like a bad penny he returned always, yacking home.  The program does not appear in the section of the Vista program features i