Tecra M7: What is the correct order to install drivers Vista

Similar Questions

• What is the correct order to install Win7 to Satellite P750-103?

  Hello

  I'm going to do a clean install on my laptop with Win7 x 64 and I would like to know if there is a specific order to install the driver and if there is a way to download all in one package (zip or other) or if I really need to download one at a time in the support page. If Yes, what Bluetooth driver I install: when I try to download that one I m re-directed to another page with a lot of them

  Thanks for the help

  Order of installation is very important for a successful OS installation. All the necessary drivers, you can find on the download page of Toshiba. Unfortunately, you have to download and install one by one. Toshiba doesn't offer a sort of all in one package.

  Order of installation is as follows:
  Win7 64-bit SP1
  PatchFiles V1.0
  TOSHIBA Assist 4.02.02
  TOSHIBA Bulletin Board 2.1.10
  TOSHIBA ReelTime 1.7.17.0
  SW 9.2.0.1015 Chipset installation utility
  Intel Management Engine Interface V7.0.4.1197
  Driver Intel 8.15.10.2353
  267.44 NVIDIA display driver
  Driver Intel Rapid Storage Technology 10.1.2.1004
  Utility 1.63.51.2C TOSHIBA supervisor password
  TOSHIBA HW Setup Utility 1.63.1.34C
  1.63.0.12 TOSHIBA Flash Cards Support utility
  TOSHIBA value added package 1.5.4.64
  NVIDIA HD Audio Driver 1.1.13.1
  Audio Realtek Driver 6.0.1.6305
  TOSHIBA 1.0.3 Wireless LAN indicator
  Wireless LAN driver
  Synaptics Touch Pad Driver 15.2.11.1
  TOSHIBA HDD Protection 2.2.1.13
  Atheros Bluetooth Driver Package v1.0.4 Filter
  Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
  Realtek LAN Driver 7.038.0113.2011
  JMicron 1.00.57.02 card reader
  ENE CIR driver V3.2
  Tuner DVB-T/ATSC YUAN V2.3.3.41 driver
  USB3.0 Driver 2.0.34.0
  TOSHIBA Sleep 1.4.2.7 utility
  3.1.9 TOSHIBA face recognition
  TOSHIBA eco Utility 1.2.24.64
  Intel Proset 14.0.2.0.1.s64_wCAT
  TOSHIBA HDD/SSD Alert 3.1.64.8
  TOSHIBA Service Station 2.1.52
  2.0.0.7.64 HDMI Control Manager
  Remote control TOSHIBA 3.0.6.1 Manager
  TOSHIBA PC Health Monitor 1.7.5.64
  ConfigFree 8.0.37rev.2
  TOSHIBA Web Camera Application V2.0.0.19
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
  Intel Wireless Display 2.0.29T2
  PatchFiles PCIIDEREG - 1.2
  PatchFiles TosVolRegulator_x64_1.1

  Good luck.

• What is the correct order of network provider

  original title: network provider order

  What is the correct order for network providers.

  my choices are:

  a. provide Dell Wireless WLAN Card Logon

  Server Desktop Session host remote M/Soft b.

   c. Web Client Network and

  d. M/Soft Windows network...

  Hello

  The order of network providers can be changed according to the requirement. I suggest you to see the following link on the change of the network adapters.

  Modify the protocol bindings and the network provider order
  http://TechNet.Microsoft.com/en-us/library/cc732472 (v = ws.10) .aspx

• What is the correct order of installation between Siebel - Apache?

  Hi, I have a Siebel architecture with an Apache web server. I wanted to confirm the installation order, that is to say, I install Siebel Enterprise, Siebel server and the gateway. After that, install the Apache web server and, finally, the Siebel Web Server Extension. This is the case? This is the correct order? or should I change a component of the place?
  
  Thank you very much
  Kind regards

  In siebel 8.1.1 first you install Gateway Siebel and Siebel Enterprise Server, install Siebel server, install the configuration DB utilities, create DB Siebel and install Siebel Web Server Extension (SWSE). If a Siebel DB is not already created, see doc below for more details and considerations:

  http://docs.Oracle.com/CD/E14004_01/books/SiebInstUNIX/SiebInstCOM_InstSES3.html#wp2367737
  http://docs.Oracle.com/CD/E14004_01/books/SiebInstUNIX/SiebInstCOM_InstSES9.html#wp2367945

  The Web server must be installed before installing SWSE. Make sure that you use a supported apache based web server:

  http://docs.Oracle.com/CD/E11886_01/V8/core/SRSP_81/SRSP_81_ServerEnv8.html#wp1013532

  Thank you

  Wilson

• Tecra M3 - Correct order to install drivers

  I bought a second hand Tecra M3 (model PTM30A-ORE002) where the hard drive was wiped. I don't have a recovery disk.

  I did a clean install of Windows XP Pro SP3 according to the license on the bottom of the laptop and downloaded the drivers. However, I am not sure of the order in which the drivers should be installed. I can't find any information on it for the M3 series.

  Can someone advise the right order?

  Hello

  I searched a bit using Google and it seems that you have an Australian model. It can be founded here:
  http://www.MyToshiba.com.au

  Here, you can download all the drivers and tools, but unfortunately there is no document of driver installation command :(

  Let me give you a little advice: on the Toshiba site I created a similar model, Tecra M3, PTM30E
  It seems to be similar to yours

  There, I created a document of instructions installation with this order of installation of drivers:

  Windows XP Professional
  Windows Media Player 10
  Microsoft .NET Framework
  Sun Java 2 Runtime Environment
  Chipsets Intel (r) software installation utility
  TOSHIBA common modules
  NVIDIA GeForce FX MEP43 display driver
  SoundMAX Integrated Digital Audio
  ALPS Pointing-device Driver
  TOSHIBA dual pointing devices Troubleshooter
  TOSHIBA software modem
  Marvell internal LAN Driver
  Internal wireless LAN driver
  Intel (r) PRO/Wireless 2915ABG LAN Mini PCI card
  Atheros AR5001X Mini PCI wireless network card
  Internal wireless network utility
  Intel PROSET utility
  Atheros Client Utility
  Wireless keyboard shortcut
  SMSC IrCC - Fast Infrared Port
  SD Secure Module
  TOSHIBA SD memory card format
  TOSHIBA SD Memory Boot Utility
  Bluetooth Stack for Windows by Toshiba
  Bluetooth monitor
  TOSHIBA Hotkey Utility for display devices
  TOSHIBA screen utility unit of change
  TOSHIBA zooming Utility
  TOSHIBA Power Saver
  TOSHIBA FBCF utility
  Manual for TOSHIBA FBCF LCD
  TOSHIBA Mobile Extension3 for Windows XP
  TOSHIBA utilities
  Password TOSHIBA utility
  TOSHIBA Assist
  TOSHIBA controls
  TOSHIBA ConfigFree
  TOSHIBA management console
  TOSHIBA PC Diagnostic Tool
  Effect of Mic TOSHIBA
  CD/DVD Drive Acoustic Silencer
  DVD-RAM driver software
  DLA for TOSHIBA
  Infineon Trusted Platform Module
  Infineon Trusted Platform Module utility
  The TOSHIBA user manual

• What is the correct procedure to upgrade Windows Vista 32 BIT to Windows 7 home one '?

  I'm running Windows Vista Home premium 32-BIT.

  I bought the upgrade disc to install Windows 7 Edition home premium.

  Where can I find a procedure step by step to install the upgrade?

  Hello

  This is a very good guide for what you want to do:

  Make sure you go from Vista 32 bit to Windows 7 32 bit to be able to do an upgrade.

  «How To Upgrade from Vista to Windows 7 Edition Home Premium»

  http://www.howtogeek.com/HOWTO/6892/how-to-perform-an-upgrade-from-Vista-to-Windows-7/

  Make sure that you first run the Windows 7 Upgrade Advisor:

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

  Edit:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

• What are the best practices to install drivers for Windows 7-64 bit?

  I have HP Pavilion dv6-1115e laptop, which Windows Vista was the original OS. Recently I upgraded to Windows 7-64 bit version, but I still use pilots who originallay came for Windows Vista (no problem at all for the moment). Now I have thoughts of installing drivers that are specifically for Windows 7 64 bit to improve performance. So what I need to first uninstall each software driver and then install the new versions OR I can install them without deleting the previous versions? It would lead to a kind of shock?

  Hello:

  Normally you can just update the drivers without uninstalling existing, unless the installation instructions will tell you to do.

  Some driver packages will automatically uninstall the old drivers before installing new.

  More simply install on the current criteria. I rarely uninstall drivers before updating them.

  After you update a driver, you must always check the tab driver in the Device Manager for the device that you updated to ensure that the new driver installed. You can check this tab before update and then after you updated to note the date/version of the pilot before and the driver date and version later.

  If for some reason, there was no change, then I uninstall the current driver and try reinstalling the newest one.

  Others may have different opinions.

  Paul

• S205 - WinXP - correct order to install drivers?

  Hello

  I managed to set up my S205 with WinXP SP3, but 3 problems:

  -Bluetooth didn't work

  -the Webcam does not work

  -the system froze after that I tried to wear the autour S205 netbook

  I looked in this forum and found that the other netbooks of the S-class need their drivers xp installed in a specific order to work properly.

  After playing with the drivers, I managed to get the blue screen of death and need to reboot 10 times to go beyond him. I think it would be best to wipe the system partition and reinstall XP and all the drivers in the right order...

  ... If there is one?

  Thanks for your help in advance!

  Alex

  
  

• What is the correct way to "downgrade" from Vista to XP on Satellite Pro A120?

  I want to downgrade to XP. I have a Satellite Pro A120 PSAC1E. How should I proceed? TIA.

  Hello

  First of all see if all drivers are available for this machine.
  You can check this link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  http://209.167.114.38/support/download/ln_byModel.asp

  Then download the drivers and burn them to a CD/DVD. Back up your data on a DVD or external HARD drive.
  After you have done all these things, just put the CD in your drive and install XP and then install all the drivers and you'll be lucky.

  Please ask, if you have any questions...

  Welcome them

• Card rules do not run in the correct order

  Hello
  
  I am using FDM 11.1.2.1.
  
  I imported data and used the card rules: mapping was not what you expected, so I had to modify the sequence of the rules on the map.
  So I updated the sequences of the rules on the map and re-validated (even re-imported) = > I still have the same problem: the card rules do not run in the correct order.
  
  Below is an example of a line imported with this problem:
  
  Export of the import mode:
  PARTITIONKEY | CATKEY | PERIODKEY | ACCOUNT | ENTITY | AMOUNT | * UD5 *.
  749. 12. 2011-03-31 00:00:00 | 60413031 | MM31N0 | 773. * 000000 *.
  
  Rules of the card for the dimension of the UD5 (exported from FDM) (sorry it is not well presented :-/))
  
  %{DIMNAME/} SRCKEY SRCDESC TARGKEY WHERECLAUSETYPE WHERECLAUSEVALUE SEQUENCE VBSCRIPT PARTITIONKEY
  749 UD5 MTN424 project MTN424 MTN424 1
  749 UD5 R_PROJ_AXMECH project AXMECH #SCRIPT IN * 2 * ' * If Left (varValues (15), 2) = "" MM"" Then. "
  
  * Result = ""AXMECH *"
  Else if varValues (15) = "" MSIND0"" Then
  Result = ""AXMECH"
  Else if varValues (15) = "" MSTLP0"" Then
  Result = ""AXMECH"
  End If '.
  UD5 749 * 000000 * project undefined PROJET_NON_DEFINI * 3 *.
  749 UD5 R_PROJ_AUTRES other projects * AS * 4
  
  If despite the sequence 1-2-3-4, the UD5 000000 is mapped to PROJET_NON_DEFINI (rule explicit map with sequence 3) instead of AXMECH (IN the rule of the map with sequence 2).
  
  Thanks in advance for your help
  
  Fanny

  The card sequence numbers have effect in a single mapping type (Explicit, between, in, analogues), not through multiple types of mapping only. Explicit cards always take precedence.

• What is the correct recovery process once upgraded to Windows 10? (No OneKey Recovery)

  I have a cell phone Z50-70 which is preinstalled with Windows 8.1. It is an OEM version, with the product key that is stored in the Bios. This is an installation of UEFI.

  The vehicle currently has OneKey recovery installed, which, if I understand well (I've not used actually still), allows you to recover from a hard disk recovery partition. This is not a "fresh" Windows 8.1, but an image provided by Lenovo that take back you to the State the laptop was bought originally (will have all software Lenovo and preinstalled drivers).

  According to the official upgrade guide Lenovo, before performing the upgrade of Windows 10, we should uninstall basically all software from Lenovo, including OneKey recovery and it won't work in Windows 10.

  Issues related to the:

  1. What is the correct process to recover the system from Windows 10 if something goes wrong? I think that Windows 10 integrates a feature "Reboot your computer" in the settings which I suppose is what we are supposed to use. It would take me to:

  a. a completely new install Windows 10?

  b. a created image during the upgrade from 8.1 to 10, containing all my files etc. when performing the upgrade?

  c. or he would use the recovery partition from Lenovo (which would have used OneKey Recovery if it was compatible) and take me back to 8.1 for Windows?

  (d) another thing?

  2. once I did the upgrade and Windows 10 has successfully activated, I think I could create a bootable with ISO of Windows 10, inside boot media and install a completely new install of Windows 10 and activate it. Theoretically, I could make as many fresh installs from the boot media I want, as long as initially, I did the upgrade (not a clean install), and the hardware of the laptop does not change. Is this correct?

  2A. If, therefore, during the first boot media clean installation process, I'd be sure compeletly remove the Lenovo recovery partition entirely and go from there, rely on 'Reset your PC' feature of Windows 10? Could I could use even just reinstall Windows boot again media 10 as a way to recover? If I understand correctly, it is not absurd to keep recovery partition it if it can not be used within Windows 10.

  I think I had a desktop PC ordinary with a retail version of Windows, then everything above would be fine. The complications added here are that 1. I have no product key Windows 8.1 (alll is managed by the BIOS) and 2. I have no recovery disk. I want to make sure that I understand everything completely before moving, and potentially do a clean installation using bootable media, so that I don't end up ruin something and end up with either a laptop I can not recover, a Windows installation that is not enabled.

  Thank you.

  Update for anyone of another reading:

  I just uninstall OneKey recovery on my installation of Windows 8.1 for the upgrade. While Windows is concerned, OneKey Recovery has been completely removed.

  The good news is that I then shut down the laptop, you press the novo button, selected "System Recovery" and I was always greeted with OneKey recovery program where I could choose to restore from original image, or a custom image. So I guess that once I have upgraded to Windows 10, I'll always have the option to restore to the factory Windows 8.1 if I ever need/want to.

  The confusion seems to be that OneKey recovery software is actually two separate software:

  1 OneKey Recovery #1 is installed in the hidden recovery partition which is responsible to perform a system restore from the image of your choice - either the image of plant or a custom image created by #2 OneKey recovery software. OneKey Recovery Software #1 is still accessible via the Novo button.

  2 OneKey Recovery #2 is installed on the Windows 8.1 installation, which is responsible for the creation of custom system images. You can also choose to restore the system from here, but AFAIK, it just restarts the computer and OneKey #1 software, which allows you to recover expenses. OneKey Recovery #2 is the software Lenovo told us to uninstall it before Windows 10. However, uninstalling OneKey Recovery #2 let software OneKey Recovery tact #1.

  As far as I know, this means that the uninstall OneKey Recovery #2 mean that we lose the ability to create custom system images, but we reserve the option to restore from a system image.

  Can anyone confirm that I understood, and that what I said above is indeed the case?

  I'm still a little uncertain about what Windows built tens in the willingness to ' PC ' do well - that it will use the Lenovo recovery partition or run a 10 Windows Installer Clean up.

• What are the correct settings in outlook express to pop and smtp in att.yahoo?

  What are the correct settings in outlook express to pop and smtp in att.yahoo?

  If it's a US or CA, Yahoo account, and that you are not subscribed to Yahoo Mail Plus, then you cannot access the account in Outlook Express.

  POP Yahoo! Mail more for Outlook Express configuration
  http://Overview.mail.Yahoo.com/enhancements/mailplus

• margins for the printer so the words are not cut on the right side. What are the correct numbers for size printing letter?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  What are the correct for the printer margin settings so that everything is on paper, without truncating them.?

  go to the icon for your printer, go to the page set up, size, A4 sheet? 19.05 mm pitch all sides, mine is set up for this and it seems ok. or what you like

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• What is the correct URL for the commercial intent tool?

  I'm in the middle to make a transfer online. I need to know the tool the URL of Microsoft online commercial intention.

  I like: adlab.microsoft.com/Online-Commercial-Intention/default.aspx

  I tried Microsoft and a google search...

  This tool still exist? And if so, where? What is the correct URL?

  Thanks for your help!

  This is the site for

  http://ADLAB.Microsoft.com/audience-intelligence.aspx

  But when I click on the online commercial intent tool, the page is not found.
  http://ADLAB.Microsoft.com/online-commercial-intention/

  I would like to use the contact information on this page to see if the tool will be available:
  http://ADLAB.Microsoft.com/contact-us.aspx

  Contact information
  • Microsoft Bing Ads Labs
  • 1 Microsoft way, Redmond, WA, 98052-6399
  • Phone: 425.882.8080
  • Fax: 425.936.7329
  • E-mail: * e-mail address is removed from the privacy *.
  • Website: http://adlab.microsoft.com

    Sincerely,

    Marilyn