Tecra M8-S8011X - a few problems after recovery

Similar Questions

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• Satellite C75 - Performace problems after recovery

  After that I got my C75 Satellite back to the factory settings (who took severala hours) I suffer from drastic performance problems. Games that were running with 50 images per second, now have about 10 frames per second.

  What could be the problem and what to do?

  Are you sure that the configuration of the OS is 100% the same as before?
  Laptop slower is usually too?

• Big problem after recovery try upgrading the firmware, now I have "POWER OFF".

  Hello

  Today, I tried to upgrade the Palm PLUS my new Z2 firmware, unfortunately something wrong with the PC and USB disconnected, after this I tried to bowl of Z2 SUS recovery still once and I completed the restore and update, but now I have an error!

  

  How can I solve? Pls help me! Phone has 5 days!

  
  

  It's quite strange, but sorry to say this, but you have to stop by your local Sony Xperia care

  http://www.sonymobile.com/global-en/support/contact-us/

• G6-1103sa Pavilion, completed the recovery after problems, but does not restart after recovery

  Hello

  I have a Pavilion g6-1103sa, with Windows 7, after a few problems of software I could just get to open in safe mode, so saving docs and images on a remote hard drive successfully, tried to complete a restoration of the system to the factory settings by pressing the ESC key on the switch and selecting the option to do so.

  When the restoration is complete, the there is a message saying that the restoration was a success and the laptop restarts, however all that happensis a message appears saying: your computer is preparing for first use, but then nothing happens

  What can I do now?

  Hello dgreen1004,

  Like the previous step to reinstall the OS from the recovery partition has failed, the only other option is to try a recovery media. Per your request, I am including information on how to get a recovery media. Please open the link following "Research drives HP recovery or a USB HP recovery disc?".

  Kind regards.

• Restart the problem after closing the lid of the laptop for a few minutes

  I use Windows 7 Home Premium on my Asus A53S. I have reboot issues a few minutes after closing the computer laptop lid eventhough I put what to do after closing the lid to "do nothing" for both on battery and the plug. And it will keep restarting over and over again. Rest

  Hi DennisHii,

  You did changes to the computer before the show?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

  After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

  A few external links to help you set permissions:

  MAC

  OS X Yosemite: set permissions for items on your Mac

  WIN

  Set, view, change, or remove permissions on files and folders

  r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

  Kind regards

  Ashutosh

• Video and audio problem after upgrade of Sierra.

  After that each OS upgrade that I know it's going to be a few problems, so I wasn't surprised when this happened with Sierra. Most have been quickly resolved by common sense, but I have a biggie that remains. Mainly, but not only, it occurs during playback of videos and translates into a serious attack.

  When you use: -.

  Google Chrome Version 53.0.2785.116 (64-bit);

  When you watch a video, I hear a short hissing sound with a rising intonation (or sometimes 2 these sounds) then the text is added to a search bar (sometimes this text contains the words drawn from what someone says in the video!), or the video play suddenly disappears and a new tab opens and opens a page of Google apps. By clicking on the symbol left back page Apps and re - opens the original video that starts playing from the beginning again.

  This happens also in Chrome when it suffice to read a web page.

  In Safari 10.0 (12602.1.50.0.10)

  When occurs sound even watch videos in Safari 10.0 (12602.1.50.0.10), and the small text boxes appear at the top of the screen for a few moments contains comments such as "Hide this app", or "Undo that" before disappearing again.

  and audio in iTunes 12.5.1.21

  The same thing is happening in iTunes or when playing the iStore clips or songs in my library. The same small text boxes are displayed at the top middle of the screen containing cryptic messages such as "click 308' disappearing quickly. Sometimes the ' find and Replace window appears with more cryptic phrases in ' are are are ' not found! This occurs every 3-4 minutes.

  When you use Pages 6.0, a doc Pages will disappear and will appear in the folder from which it was opened. Or Graphic Converter 8, an image suddenly disappears and will open the Finder.

  I ran Etrecheck that says everything has been "excellent". I ran disk utility: first aid, who said there is corruption, he couldn't fix it and is running in recovery mode. I did, and the glitches always come back.

  Summat is false and I am not enough techno to understand (or maybe even explain it very well).

  Anyone bed this litany has an overview of what happens with a recourse?

  Thank you very much

  Graham

  Sorry, should be added the following: -.

  MacBook Pro (retina, 13 inches, end of 2013, recently upgraded to Mac OS Sierra.

  Processor 2.4 GHz Intel 15 8 GB memory

  Grahan

• Satellite L10-194 cannot run after recovery

  Hello! I used my Satellite L10-194 for a few years, and he started to be really slow, I decided to reinstall the system (recover) to make it cleaner and faster.
  I found my recovery of product L10 DVD - ROM, but when I finished the system restore would not start. I tried the recovery for some time, and it does not help. Whenever I try to start the computer, when it goes to load the system it just turns off (I think that it is something like the blue screen flashes for a second).

  I checked the disk file image in advanced mode and HARD, and that's OK. But when I do HDD-> image in advance mode, after it is sometimes a moment when I have access to the command line. After getting "dir C:" I don't see a Windows directory (?), when restarting the computer does not work as usual. I'm doing something wrong?

  I tried another CD of product recovery of the second Toshiba laptop that I have, and it works, it installs Windows but without pilots and things (it's a completely different model from Toshiba). What should I do? I'm not sure if the use of system preinstalled for model is the right idea (and legal)?

  I had some problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

  PS.
  Sorry for my English, please correct me in my errors, to help me improve the language :)

  > I had a few problems with my front L10, and I had to change the motherboard. In service, what they said that they can't find a motherboard identical like that in my L10, so they used some different model. It's maybe the problem of recovery does not work why?

  I think that this is the reason why your laptop does not start after the recovery procedure.
  Seems that the drivers that are part of the image are not compatible with the new motherboard.
  Maybe the driver chipset or make sure you graphics card drivers some worries and windows crashes before starting the system
  Maybe you could star the windows in safe mode. Press F8 just after pressing the power button / stop. Then choose Safe mode.
  In safe mode, uninstall the chipset driver and the graphics driver and then try to start it again.

  If that does not help, then install windows using a clean Microsoft CD.
  Pilots should be placed on the page of European driver of Toshiba.

  welcome them

• Windows does not start after recovery

  Hey, satellite 1800 started son to have more and more slow to the point where it took close to an hour to boot in Windows. It got to the stage where it seemed that recovery from the CD was the only road - so we did. Everything had to look successful from the point of view of recovery but the installer of Windows XP displays "Please wait...". "with the normal activity of the disc looking for 20-30 seconds and then hangs - no disk activity, the mouse is not responding. I went through the recovery in "expert" mode and don't see any problems with the recovery process. Issues related to the:
  1 no matter who else seen elsewhere?
  2. what else can I do diagnosis-wise?
  3 which, basically, the recovery process not / (fact he re - format partitions, could it have left a virus?)
  4. I'm better h/w or s/w diags?

  Bitshifter

  Hi Bitshifter,

  topic of your question 3:
  The recovery process replaces the whole HARD drive or even a partition with an image created by Toshiba. This image contains an operating system, drivers, and a few basic programs. All other data (including viruses) in this partition will be deleted.

  question 4:
  I don't know the cause of your problem, but I think it's a hardware problem, because after recovery, there may be incorrect or missing software.

  Sorry I can't give you more information.
  Good luck!

• Re: Satellite A505-S6040 - strange problem after installation of the NVIDIA driver

  Hello, first of all sorry for my bad English, but ill try to explain myself as best I can.

  I have a Toshiba A505-S6040

  I like 2 months

  My problem is that when I start the laptop and go to the desktop theres a certain point that stop loading... and it gets freeze here until I have to reset manually... (I can go trough well safe mode).

  I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed that there were a few problems, and so I changed it again drivers from the Toshiba web page.

  Well 2 days this is well... I might do normally...

  OK, I decided to use the recovery tool fromToshiba, but the same problem happened while isntallin drivers se... I don't know if it was coincidence, but just after it install drivers from nividia it just stop working again... it froze again... and now it won't let me start with an account , because it gets has frozen afe mode, only I can access my laptop...

  one thing I tried was unisitallin the drivers nvidia in SafeMode... and try to start the laptop... it worked... or at leat is not trapped, but since I made the recovery of Toshiba it won't let me start the session.

  I have really no idea what could it be... the grpahic card?

  Thank you.

  Hello

  > I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed there were a few problems and so I
  > changed drivers again

  It looks like a card driver from nvidia.com graphci causes freezing. In addition, it is not recommended to only use not pre-tested by Toshiba driver. Toshiba drivers are modified to support protection against overheating. So, use only the drivers of Toshiba driver page.

• Satellite M40X 299: no boot after recovery

  Hello

  I have a problem with my satellite M40. After a problem with spy software, I tried to format my pc.
  I did a restore of the system with the original cd. At the end of the mind, I pressed ctrl + alt + delete to restart as it was written.
  But nothing happens, I have only a cursor in the upper left corner of the screen and windows does not start. I did the operation 3 times and it's always the same result.

  I don't know what more I can do.

  Thanks for help.

  Excuse me for my English

  It's very strange. Can you get the CD of Microsoft facilities and try to install the OS? I'm really interested if the same thing will happen again.

  Please don't be crazy on me because I t n wrote a few exact explanation but after recovery without end I've done in the last 8 years I have never seen anything like it.

• Pavilion G7-1328dx: I have a problem with recovery disks

  I have recived a message error (error bios 501) was one that says windows could not start at this point I did a system restore, it worked then it instaled updates and when I turned it off it seamed ok a few days elapsed before I go back and it didn't start so I tried to do the same restore point who had worked but im guess I chose the one bad because after that I could get in the bios for the test command and start system and info windows recovery tool not forbear even so I am really crazy and just ordered the HP recovery disks have tried a couple of times he says it didn't I saved a copy of the details , but I don't know how to open it so I can copy and past I also tried putting it in a windows disk because I realized that one problem I had is a new hard drive my boyfriend out the HDD without asking and wiped it and put it in his laptop, my friend was helping me with the laptop, but cannot stop now can someone please help

  Assume your drive recovery is ongoing demand... because the 501 error has not might be related to your operating system... or the hard drive...

  Maybe think I didn't read clearly on your description, but it seems that you already have recovery files broken, or the HARD drive is on form, no? Suggest that you call service help find someone help on data recovery. If the HARD drive has already been fomatted, it will take a few HARD drive recovery professional technician to do this action, using special equipment or tools. Sometimes it can get the restored data sometimes it breaks down, according to the State of the HARD drive. If he's already got formatt low level, it would be very unlikely to recover data... Then... you'd call better help service. Hope you can recover data.

  If you have already saved data I just re - install the operating system. It is easier. Alternatively, you can call the service provide the recovery disc number (printed on the label on the disc) see it's the right disc for your device. And try to use the right disc for re-installing.

• Dell Inspiron 3537, few problems

  Hello.

  I have an old Dell Inspiron 3537 of a few weeks. Was first Win8, but I have the update Win8.1.

  After that I signed up for laptop computer, the next step was to my C: partition on both sides of the partition, partition C (OS) and D (Data). After that, I installed successfully all the programs I need. And after a few days problems began with a few BSoD. There are few problems and I'll explain all of them.

  My Dell checkup "troubleshooting blue screen" reports every day one or more BSoD with explanation:
  "The unknown hit-and-run driver (C:Windows/system32/drivers/atikmdag.sys) seems to have caused a system crash. Perform the tasks below to help prevent unexpected stops in the future".

  On the same health check of my Dell, I try to run "PC Checkup", and everything seems OK, no reported problem. A personalized analysis on a single card, ATI (ATI Radeon HD8850) video and the result is 'passed '.
  I run also build in DELL diagnostics (boot menu) and there were no errors, and also Dell diagnostics online and everything was fine.

  I try to install the new driver from DELL (AMD Radeon HD 8850 M pilot 13.151.0.0) website, but during the installation screen blinked several times and then went away. I think it's OK because the video driver installed. I left phone for an hour to "complete installation", but noting happened. I turned off laptop by pressing ON / OFF button for 5 seconds, but after this laptop won't restart. Here, I noticed another problem that I will share with you in the moment. Fortunately, I have installed Acronis True Image 2014 so I was able to restore a system. BTW, same version of the driver is already installed according to the "MSINFO32).

  Now, my system works, I still see the BSoD warning in my Dell Checkup, but actually I don't really see this BSoD. Strange.
  If I click with the right button on the desktop and then click on "Property Graphics" or "Configure switchable graphics", I get this warning:

  

  Second problem. My laptop during "BLACKOUT" explained beforehand, I tried to use Windows Recovery. I tried "Refresh" and "Resettlement" and both times I got the message:

  "Could not find the recovery environment. "Insert the recovery media or your Windows installation and restart your PC with the media.

  If I try to use "Backup and recovery of Dell", I received the message:

  "Dell backup / restore could not detect the Partition Recovery on this computer." It may be missing or damaged. To recover your computer to the original factory condition and restore the recovery partition, please use your system recovery disk"etc. etc...

  I don't have any coz discs that OS was preinstaled. So, basically I can't use all the facilities to recover my laptop because I have no media or recovery factory recovery disc. Fortunately, I'm using Acronis, but it's not a point. I want something to recover my original system, factory condition.

  In fact, Windows catering facilities are OK and I can restore to a point, I created.

  BTW, my hard drive is partitioned on 7 partitions. Initially, there were 6 partitions with immense C: partition. I shared this one on two.

  

  And also, since this BSoD is probably caused by the video driver, how can I safely to update this driver. As explained previously, I had after the first test disaster. Can I try to install the new driver for AMD Radeon HD 8850 M from the ATI site?

  Sorry for the question so long. If you have additional questions, I'll be more than happy to answer.

  I hope that I will get answers, thanks in advance!

  Inspiron 15R (5537, mid 2013) Service tag:ADMIN NOTE: maintain the label removed by privacy policy > | Express service code: ADMIN NOTE: kidnapped by the Express service code privacy policy >

• Touchpad not working not for a few seconds after I touch it with your finger, then a more...

  I already tried SMC and reset the PRAM, but who doesn't. I found someone with such a similar problem (Trackpad doesn't work sometimes on MBP after upgrade OS X 10.8.2)

  but the measures that seem to work for them do not work for me.

  Thus, as described in the title. the touchpad works very well as long as I just touching with a finger, so scrolling with two fingers or by changing desktop computers do not work. the mouse freezes for a few seconds after I hit with 2 fingers. After about 3 seconds it starts working again.

  If there is someone with the same problem let me know!

  Technical specification:

  OS X El Capitan 10.11.6

  MacBook Pro (retina, 15 inch, mid-2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Video card: Intel Pro Iris 1536 MB

  flash memory: 500 GB

  I propose a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.