Tecra M9: not enough memory to run
Hello
I have a problem with an application that freezes with messagebox not "enough memory for the operation".
I repeat, the problem on 7 different model laptop Tecra M9 with configuration: 1024 + 1024 MB RAM with Nvidia NVS130M.
I tried to change the virtual with ratio 1.5 * ram, 2 * ram memory... and even without virtual memory... every time the same result, when the memory used by file (visible in the Manager of tasks bargraph) occupies about 1.30 GB, the message box appears an application stopped.
I did a disk defragmentation, checked the Ram, tried the 3 G option in boot.ini, no way.
Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).
I don't think it is the right solution for 'downgrade' the size of Ram, if someone already has this kind of problem?
Thank you in advance
Hello
> Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).
Hmmm, check if you can run Notepad with another RAM module removed.
I'm not quite sure but it is possible to m the error could be related to a dysfunction of the RAM.
Tags: Toshiba
Similar Questions
-
Unable to connect like pop up-drop down comes in every time tried to install cripten 2. exewhich have not installed - message "not enough memory to run this command. Message "incomplete Installatiion.
It's good that I have a minimum of 107 GB on each of the partitions.help 3 Please
Hello
1. are you making reference to the connection windows or you connect any website.2. how many times you get this pop-up?3 - is this error occurs when you run a specific program or out of order?4 you did changes to the computer before the show?5. what program are you trying to install?Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.I hope this helps. -
"Not enough memory to run the Titanic"
Basically I'm playing an old game of Windows 95, Titanic and I changed the compatibility, but now it says that I don't have enough memory to run it. I deleted some programs, done the cleaning disc too. I have not any open programs. It is said to the press compact to compact memory but when I do nothing happens...
Ive just run a google search and some say that they got it running in W7 by playing with the compatibility settings, esp the resolution of the screen (640) and 256 colors, as well as disabled themes. Others say that he needs all o parameters. Have you tried all these various combinations.
Another site said he needed W95 compatibility mode, and another said that it works under XP SP3.
Not sure why there is so much to mix and match however?
Try the first three parameters (res/color/themes) W7, that fails try under W95 (compat) and XP - SP3. If this fails, try all 5 with the same combinations.
If you have an older Windows 95 operating system (or maybe an old W98) or even XP if you know runs in that, then you can be able to run the game in one of the free programs "virtual machines", i.e. of W95 running in a virtual machine actually running in W7. Something like http://www.vmware.com/products/player/faqs.html or http://www.virtualbox.org/ perhaps (good read) but you will need a valid MS OS W95/98 to install in the virtual machine.
It comes BACK http://en.wikipedia.org/wiki/DOS Windows 95 sort of 'sat' on a subset of BACK as I can remember, like W98, and to a lesser extent WME. Some of the older games initially ran in the BACK. I had a game installed in Windows 95, but I had to boot into DOS mode to actually complete.
-
Acrobat Adobe DC not enough memory
Hello
I am a Subscriber monthly to adobe and just today, I combined my pdf portfolio files and tried to print. But acrobat gave me an error message saying not "enough memory to run this defense." I have no idea what is wrong. I was able to print the single document of portfolio, but I can't print all the documents in the portfolio. Also my adobe is up to date.
You can download the latest hotfix for this problem by using this link, and that should fix this problem:
Acrobat help. Release notes | DC Acrobat, Acrobat Reader DC | Update
Kind regards
Tariq Dar.
-
Hello
I have a PC running Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".
When I have this message, I can't open another application, or those in Windows... I have 2 GB of memory and only 700 MB are used.
If I open the calculator several times (about 65 times), I have the same result.
Sometimes, I get no error message, but the application does not open.Someone knows why?
Thank you
Hello
You did the chnages on computer before this problem?
I suggest you go through the steps of the following atrticle.
"Not enough memory" error message appears when you have a large number of programs running.
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows. -
My computer says there is not enough memory available to perform the printing. When I tried to defrag, there is not enough memory to perform this function, either. Several years ago a friend introduced (then new) computer with 2 partitions - C and F drive. Everything I've done seems to be on the C drive. Now the C drive = 935 MB free of 19.52 GB of capacity, while F = 56.62 free 56,79 GB GB. How to release the rest of the disk on drive F? There are a few things here, and reading of 'aid', it seems that they would be removed if I deleted a partition. This computer is now my husband, who use it for e-mails, play Spider and a few Google searches. I'm no computer expert, so I'm hoping for a simple solution.
Marjorie
Your report reveals a number of issues. Your C partition has only 4% of free disk space. You must have a minimum of 15% but preferably 25% of free disk space.
Normally, the report will contain details of your MFT (Master File Table), but this information is not there. I have not encountered this situation before and at the present time, I do not know its importance. The MFT is a master index of all the files on your computer and their location, which allows the operating system to access all the files needed to perform a given task.
The reference to the DC4.bak and similar files may be indicating a problem with your trash. This is where deleted files are stored temporarily until the user decides to permanently remove the files. The update of Windows XP SP3 is installed? Right click on your my computer icon and select properties to view details. There were three MS updates and you may not have the latest updates.
Your version of AVG is obsolete. You have version 8 and the current version is 10.
You use Outlook Express, and it takes a considerable disk space. You can move the folder to your partition F store. This link explains how:
http://www.insideoe.com/files/store.htm#movestoreYou can increase the free space on the disk by deleting restore points, keeping the last restoration, using disk cleanup. Follow the instructions on how to do it.
Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point.
I recommend you download and install cCleaner, which is a best utility disk cleanup, but this would be better done later.
You can create more free space in C by performing the steps suggested below.
The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.
A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.
The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.
When you have completed the above, restart your computer and display a new report Disk Defragmenter as well as answers to the different questions, I asked.
-
Not enough memory to perform the operation
Hello
I tried to run the code below, but still I get the error "not enough memory to perform."
I don't know why is so? Its simple operation that I am doing...
Thank you very much...
This is what you need:
Note that may throw you / add 'steps' caused by the type of double cast in full.
Another note: in light of your departure and the timeout value and the Delta_f, you will get 10495 steps. This seems quite high. For?
Norbert
-
I do tcp ip asks the customer side my executable (not in development mode I test my development mode my client application does not show enough memory but in application .exe it shows not enough memory very soon). Is there a solution to this i have also added late next to Scripture. one more thing my usuall data packet size is 200 to 300 bytes. and a few times I got a big one given to b received as 589513793 bytes.
Yet one thing my executable perform well on desktop rather than laptop and win xp as win 7.
Thank you for the time and help
concerning
Why don't you use a timeout on the TCP, playback function? Chances are that you lose your framing and playback four bytes could be the data packet, depending on how things are running hight. Try to set all the timers TCP-1.
-
Not enough memory to complete this operation.
I had a glance through the assignments to the title of this topic and no solution to the error that I am experiencing.
My LabVIEW application runs on a windows 7 PC and receives messages from an application running on tha RT PC LabVIEW TCP/IP. These messages from 4 k to 7 k bytes in length and reception are queued in the comms TCP/IP thread and removed and converted to the appropriate data type for display on the front panel in another thread (design of producer/consumer).
After running for between 1 and 24 hours, one or more "not enough memory to complete this operation.' dialog boxes are displayed. This interrupts the execution of the application, but these closing dialog boxes allows the application to continue running. What I find strange is that if there is not enough available memory how is possible for the application to continue running. Windows resource monitor display shows that there is always some 1.1 GB available. Also, what is strange is that there no noticeable change in memory is committed to my application. I expect that if I had a memory leak which committed memory would slowly creep upward. If I need extra RAM in this PC or adding RAM will increase just enough time between errors?
My system specs are as follows:
Dell Optiplex XE Intel Core 2 Duo CPU 3 GHz / 2 GB RAM running Windows 7 Professional 32-bit
LabVIEW 2010 SP1
Any help would be appreciated.
Kind regards
Rob
Dear Rob,
Same problem, I was faced with one of my applications.
Give some delay in your writing RT TCP loop. RAM is fine no problem with your RAM. If you connect to your data file, you found after some time, you get some unwanted characters on the TCP/IP Protocol these unwanted characters increase your data to read size. So to avoid this gives some delay in your cRIO TCP send loop.
-
KB942288 installation, get message "not enough memory is available to process this command."
What storage speak?
See...
Windows Vista Help: Strategies to free up disk space
http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-spaceThen...
Open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]
Vista Service Pack 1 (SP1) or SP2 installed?
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Visual Foxpro Professional error: "not enough memory".
AFTER THAT I INSTALLED VISUAL FOXPRO PROFESSIONAL VER 3.0 ERROR NOT ENOUGH MEMORY WHEN I SPEAR VFPOriginal title:
After I installed Visual Foxpro Professional I get "Out of memory" when I when I run.
Hello
After you have installed microsoft visual foxpro 3.0 on my windows xp pro service pack 2 computer it was successful but when I run the program (visual foxpro 3.0), it won't work and it says insufficient memory.
pls help...TNX
Danny
Hey Danny,
You can see the steps from the following link and check if it works:
FIX: Out of memory in Visual FoxPro on fast computers
http://support.Microsoft.com/kb/179287
You can also consult the following link:
Troubleshooting memory errors
http://support.Microsoft.com/kb/112676Let us know if it helps!
-
What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.
Hi Jerome,
· You receive the error when you try to print?
If so, check to see if the following helps you.
Run the next Fixit tool to check the issue.
Problems printing and printing errors
If this isn't what you are looking for then respond with more information so that we can help you best.
-
Hello, I tried to configure this file umdf.exe
but this error pops up: "not enough memory is available to process this command." "The installation did not complete.There is a lot of memory and disk spaceSo could someone tell me what to do?Hello
Follow these steps to get the fixed number.
First copy umdf.exe of "wmp11-windowsxp - x 86 - enu.exe" on your desktop, two methods:
(a) decompress wmp11-windowsxp - x 86 - enu.exe (ex: with TotalCommander-> Alt + F9) and copy umdf.exe on your desktop
(b) run the wmp11-windowsxp - x 86 - enu.exe (if you run it will extract the folder folder)
Click Start-> Run-> %Temp% [ENTER]
Press F3, and then search for "umdf.exe".
Copy this file to your desktop
Cancel the installation of WMP11
Rename the following files, it just copy & paste into your command prompt:Rename C:\WINDOWS\system32\drivers\wudfrd.sys test_wudfrd.sys
Rename C:\WINDOWS\system32\drivers\wudfpf.sys test_wudfpf.sys
Rename C:\WINDOWS\system32\wudfhost.exe test_wudfhost.exe
Rename C:\WINDOWS\system32\wudfsvc.dll test_wudfsvc.dll
Rename C:\WINDOWS\system32\wudfx.dll test_wudfx.dll
Rename C:\WINDOWS\system32\wudfplatform.dll test_wudfplatform.dll
Rename C:\WINDOWS\system32\wudfcoinstaller.dll test_wudfcoinstaller.dll [ENTER]Now run the umdf.exe and reinstall it. After that is finished, connect your phone and your MTP problem is solved.
Bravo!
Santosh Narayan -
Unable to save my project. It says "not enough memory to process this command."
It says "not enough memory to process this command" what should I do?
Dictate the maximum size of your system
resources and free space on the hard disk.As you have posted in a forum of Vista, I guess
you are taking Vista Movie Maker 6?How much free space is available on your hard disk
by car? And... What is the duration of your project?It is sometimes possible to publish / save in the
Even if the DV - AVI format. WMV fails. If you are
running Vista Movie Maker 6.see the following:Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerWIndows Vista Movie Maker 6
The following chart shows where the DV - AVI option.
http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpgAnd sometimes unchecking that will enable all filters
registration in progress...Reach... Tools / Options / compatibility... tab and
Uncheck all filters / OK.The error that you received can be caused by the following:
(1) source incompatible or damaged files (photos,
video clips, audio clips).Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv
Audio - wav, wma, wmv(2) the project is too big or too complex for your system
resources. Made video is time CPU and
can sometimes cause blackouts.The following items may be worth a visit:
Movie Maker - problem resolution - "cannot record a movie.
http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.htmlWindows Movie Maker error
Cannot complete the Save Movie Wizard
http://moviemakererror.blogspot.com/ -
Original title: Windows Vista / on my computer HP laptop G60 gives me a hard time
When I try to record something, it tells me there is not enough memory, or when I change an image in paint. yet my reader/c is not even half full. I also noticed that it is said that I have a recovery disk, which seems to be to store all my stuff instead of my main drive, why you get, and how can I fix this problem?
Hi Shirleysilva,
Run the disk cleanup utility to remove unnecessary files from your system and then check if it helps. Disk Cleanup helps your computer run faster. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.
To delete files using disk cleanup, follow the steps below:
a. open Disk Cleanup by clicking the Start button, all programs, Accessories, clicking System Toolsand then click on Disk Cleanup.
b. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. If the Disk Cleanup: drive selection dialog box appears, select the hard disk you want to clean, and then click OK.
d. click the Disk Cleanup tab and select the check boxes for files that you want to remove.
e. When you are finished selecting the files you want to delete, click OK and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.
Check out the link for more details below:
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
I hope this helps!
Maybe you are looking for
-
Broken FF after my windows infected by the virus userinit. The virus is eliminated, but FF has always fought in https and uninstall/reinstall does not solve https broken
-
Satellite P30-133 CD/DVD not recognized in Win XP
A few months ago that the CD/DVD drive disappeared from windows XP home SP2It is visible in the list of the BIOS boot, but I'm not sure if it turns elsewhere in the bios. The BIOS also seems to be ad slowly started upward. I have reset the BIOS to de
-
Hello I'm trying to programmatically control the legend of a chart graph. I wrote a labview code and I can't find what the problem is here.The legend does not work correctly as I hope. I sent some input values (STRINGS) in the Plot.Name of the node p
-
HP Pavilion a230n. XP Home came with it. Try to get it current. "Windows XP Informa" one string or is it (part of) a file name? If the latter, I do not know its path to check file attributes.
-
Expandable balloons broke while debugging in VB2005EE and VC #2008
As described here http://social.msdn.microsoft.com/Forums/en-US/vsdebug/thread/adf9e518-92ac-4068-8c75-56b5edc69fc6 my problem is that I can't open extensible ToolTips for debugging, they all disappear just as if I had moved the slider away from some