Tecra M9 - peripheral unknown.
Hi guys,.
Just wipe the base that was on my Tecra, install no problem with most of the drivers had obtained most of them since the Toshiba download pages.
However, I am really puzzled with one device and its beginning to my nerves now! I searched the web and can't find anything, so I need help!
Here are the details of the device:
In Device Manager, I have the following - PCI Simple Communications Controller
PNP ID - VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03
Hardware ID-
PCI\VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03
PCI\VEN_8086 & DEV_2A04 & SUBSYS_00011179
PCI\VEN_8086 & DEV_2A04 & CC_078000
PCI\VEN_8086 & DEV_2A04 & CC_0780
ID of Instance of device - PCI VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03\3 & B1B FB68 & 0 & 18
Please, someone must know what it is!
Hello Spike
Just one question: you try to install Windows XP Home on your Tecra M9?
Tags: Toshiba
Similar Questions
-
Install Win 2000 on Tecra S2 - peripheral unknown
Hello
I try to install win 2 k on my Tecra S2.
I have download all the drivers and I have read the order of installation, but now I have an unknown PCI device.I try to check all devices such as:
-Modem
-Lan card
-Wireless network card
-Card bus
-Audioetc etc (including the irda driver, mobile extension, power save the driver driver touchpad...)
I also try to re install all the driver but I ' have already the unknown PCI, the only factor device that I have not installed is the Bluetooth.
Please can someone help, please
The only solution for you to find your way through this download one
Freeware called "Unknown device identifier" of this site: http://www.zhangduo.com/udi.htmlThis program will allow you to easily locate the correct device description as well as the
pilot coresponding.Hope this will sort things
Concerning
chain
-
GANYMEDE + peripheral unknown network or Client AAA package
Hi all
I can do connect using the set of credentials to the ACS server, log it showed:
"Reason for failure: 13017 receipt GANYMEDE + peripheral unknown network or Client AAA package."
I know there are a few changes on GANYMEDE + room for new catalyst IOS, so I consult the guide and it is the end of my config:
AAA server Ganymede group + TAC_PLUS
the AUTH server name
RADIUS server AUTH
ipv4 10.10.21.251 address
key xxxxxx
AAA TAC_PLUS authentication connection group Ganymede + local line
TAC_PLUS AAA authorization exec group Ganymede + none
AAA authorization commands 15 default authenticated if
accounting AAA periodic update 1
exec accounting AAA TAC_PLUS start-stop group Ganymede +.
network accounting AAA TAC_PLUS start-stop group Ganymede +.
connect accounting AAA TAC_PLUS start-stop group Ganymede +.
My platform is
-C6500 running on IOS 12.2 (33) SXJ1
-ACS 5.2.0.26
Need advice on this subject, thanks
Noel
Hello
What is IP IOS appropriate set to network devices and the AAA Clients for the candidate countries? If Yes, what IP address is indicated on the failure of the ACS that includes the error "GANYMEDE + unknown cover peripheral network or Client AAA? ACS reports as unknown IP address when it is already set appropriately?
Kind regards.
-
Re: Tecra A7 PTA71E - unknown device TOS1901
Hello
I have a Toshiba Tecra A7 PTA71E-07500VPT with Windows 7 Prof
I did a BIOS upgrade to A6, then I installed the Windows / Prof. SP1 PT.Problem: When I open the Managment devices, I see one '? "other devices"and"!" hardware ID "unknown device".
ACPI\TOS1901
* TOS1901Where can I find a solution?
Thanks in advance.
JLapis
Hello
Check out this Toshiba document:
http://APS2.toshiba-tro.de/KB0/TSB7501W20006R01.htmPlease download and install the "password utility" or the "Utility supervisor password" to get this resolved.
-
Tecra A10 - rest unknown smart card
Hello
I have Tecra A10 - 19 f, PTSB1E
I use windows 7 x 64 Ent
Install the following package, http://support1.toshiba-tro.de/tedd-files2/0/smr-20091029091828.zip, but the pilot remains unknown smart card.Can someone help me?
Thank you
RobertoYou have installed the driver properly?
Unzip the driver downloaded in an empty folder. Go ahead and you will see a folder named x 64.
Start setup.exe from there. -
Tecra A7: Two unknown devices after installing the OS Win
Hi all
Recently bought an A7 and was convinced all the preinstalled software Toshiba slowed things. Managed to fresh install windows, then use Toshiba Apps Installer to restore items that I really wanted to. Everything went well and the computer is about two times faster now. However, I have two following unknown devices:(1) device type: other devices
Location: on Intel(r) 82801GBM (ICH7-M) LPC Interface Controller - 27 b 9
Hardware ID: ACPI\IFX0102(2) device type: other devices
Places: On system compatible ACPI Microsoft
Hardware ID: ACPI\TOS620AI installed the latest Intel Chipset drivers and no luck. Perhaps one of them is the sound card (although I have installed the drivers as well) and one of them HARD drive Protection (that I have no intention of installing anyway).
If someone can confirm what they are it would be much appreciated.
Kind regards
ChristinHello
Installing drivers and utilities Toshiba should be made in the right order.
The chipset utility must be installed at the beginning and then the common modules.
You must use the form chipset the Toshiba site.The Tecra M7 also supports the protection of the HARD drive. Normally you will find it at the last position under "Audio, video and game controllers" in Device Manager.
I found this document Toshiba how to identify an unknown device:
http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htmMaybe it helps.
-
Satellite A200-1The - peripheral unknown in Device Manager
I have the suite listed under question marks in my device manager:
? Multimedia controller
? Network controller
? Unknown deviceI installed the sound and it works
I installed the network card and it worksWhat are the above devices?
Stand by. Which operating system you are trying to configure?
Have you checked on the Toshiba download section if the installations Instructions document is available? If you follow this document you will install everything you need and everything will be OK.
Anyway, multimedia controller can be peripheral multicard reader, network controller is probably wireless card. I can't say what unknown device because I know not what drivers you have installed. -
Portege A600 - peripheral unknown after Windows 7 installation
All the g ' Day.
I've got an A600 (original Vista) I recently installed Windows 7 Professional 32-bit (reformat/reinstall). I was careful with the installation order. All right except the built-in camera does not work and there is managing an unknown controller PCI Communications Simple in the device. Without a doubt, the two are linked.
I tried to reload the drivers for the chipset without result. The unknown device is bus PCI 0, device 3, function 0. Is it possible to determine what this device is so I can find the missing driver?
Hey Buddy,
Can you post the vendor and the device of this unknown device ID? It would be useful to identify it.
=> [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]But the PCI communication controller could mean the webcam in your case I would try to install the driver for the webcam of the official website of Toshiba. After installation, you should be able to start the webcam software, and use the webcam.
-
Portege R700 - peripheral unknown in hardware
Hello
Win 7 Pro, after installation clean (I installed all the drivers Toshiba again), I have 2 unrecognized currencies left.
1 a:
AuthenTec Inc. AES1660
Location: Port_ #0002.Hub_ #0003It works fine, but no driver is shown and it is not recognized by windows.
Yes, I installed drivers for the fingerprint and Touchpad.2 a: unknown device
Other devices
on system compatible ACPI Microsoft
The drivers for this device are not installed. (Code 28)Details: ACPI\TOS6205
* TOS6205Any ideas? Thank you!
The first should be fingerprint sensor and a second module BT. If you have installed BT stack installation activate BT (FN + F8) to complete the installation of the BT module.
To be honest I n don't know what is wrong you but here's the Win7 installation order. All the things listed must be installed in this order:
Win 7
USB3.0 Driver 1.0.20.1
Driver USB-Serial 1,00,000
TOSHIBA Assist 4.00.00
Security TOSHIBA Assist 2.0.8
TOSHIBA Bulletin Board 1.6.08.0
TOSHIBA ReelTime 1.6.06.0
Infineon TPM software professional v3.60.2071.00
SW 9.1.1.1024 Chipset installation utility
Intel Management Engine Interface 6.00.40.1215
Intel AMT 6.00.40.1215 software
Driver Intel 8.15.10.2125
Driver Intel Rapid Storage Technology 9.6.1.1001
Realtek Audio Driver 6.0.1.6083
Driver Intel LAN 14.8.3.6
Synaptics Touch Pad Driver 15.0.12
TOSHIBA value added package 1.3.12_64
Ricoh 2.08.03.04 card reader
Wireless LAN driver
ConfigFree 8.0.30
TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 7
TOSHIBA Fingerprint Utility 1.0.2.27
TOSHIBA Web Camera Application V1.1.2.13
3.1.3 TOSHIBA face recognition
Bluetooth Stack for Windows by Toshiba
TOSHIBA eco Utility 1.2.12.64
TOSHIBA HDD_SSD 3.1.64.6 attention
TOSHIBA HDD Protection 2.2.0.4
TOSHIBA Service Station 2.1.40
TOSHIBA PC Health Monitor 1.6.2.64
TOSHIBA Sleep 1.4.1.3 utility
TOSHIBA Disc Creator 2.1.0.2 for x 64
TOSHIBA Media Controller 1.0.80.7
TOSHIBA Media Controller plugin 1.0.5.10
UPDATE2 PCIIDEREG - 1.1
Update3 FixFPService_REG_1.0
Update4 TosVolRegulator_x64_1.1 -
Equium L10: Windows Vista Beta2 - peripheral unknown
Hello
I have a Toshiba Equium L10 with Windows XP loaded as default but I installed VISTA Beta2 "public dissemination" on this issue and because it is only 1.5 GHz Celeron CPU with 512 MB of RAM, it worked fine, but I have a problem that I hope I can get help with users in this forum, and especially those who have the same or similar Equium model as I have?
Okay, after VISTA installation, I checked in the Device Manager and noticed "unknown device". After checking the info given in its properties, I've detailed below:
Geographical area: ACPI Microsoft compatible controller built-in
Value: ACPI\ACPI 0001 * ACPI0002When I reinstalled XP again, I went to the Manager of devices/batteries/Microsoft SMART Battery, the entry for Microsoft SMART Battery subsystem 'ACPI\ACPI0002\6 & 28CA 2229 & 0'.
Notice the "ACPI0002" info given for the "unknown device" in VISTA is the same info given for "Microsoft SMART Battery subsystem" in Windows XP. So I'm left wondering if the unknown device Vista is Microsoft SMART battery subsystem and if yes, why VISTA installed the driver for it?
Can someone help to find a driver for the "unknown device" in VISTA?
Concerning
BraveHello
The unknown device appears because the driver is missing.
Unfortunately, at this time you will not find any what Toshiba supported drivers for Beta 2 of Windows. It is a beta and not official version on the market.
I think that if this OS will be official, supported so you will also find the necessary drivers. -
Re: Satelite Pro - 1 5 - C850 peripheral unknown - ACPI\TOS6205
Hey people,
I bought a "new" satellite pro c850 - 1 d 5.
It came with win8 (pooooh) and I installed 32 bit win7 with all ms updates and toshi.
everything works fine - until a little thing:unknown device - ACPI\TOS6205
help Google and I found that it should be the 'cpu to pci bridge'.
on another site was recommended to install the toshi driver "tc00474200k.exe".tadaaaa: bluescreen ;-)
restore the last working config, ok.
and now? advice or a suggestion?
thxsalot
MikeThis unknown device is bluetooth laptop adapter. You can download the right driver from http://aps2.toshiba-tro.de/bluetooth/
Check it out.
-
Satellite L500D - peripheral unknown listed in Device Manager
Hello world
I have a Satellite L500D and in other devices under Device Manager, I have unknown device listed. I installed all the drives listed on the Toshiba page without success, anyone had this before and if so please can you me how to fix it.
Can you please tell us what OS you are using?
Anyway, how to identify an unknown device in Device Manager, you can read here
http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htmPlease, check and send comments.
-
Re: Satellite L300 - peripheral unknown in Device Manager
Hello
Satellite L300 OS - Vista 32
I installed again software to use the USB port to connect the Council and this Council during this installation program that some things went wrong and all my USB port does not not or does do not at all...
When I checked the Device Manager it shows like any other device-> unknown device...
I have install the Toshiba download chipset and still I can t solve the prob...
my USB all the port does not...
My WiFi is not working...
my camera does not work...rest of all work, I guess that any suggestion to solve this problem?
Hello
Would it be possible that the 3rd party software that you have installed to use the USB ports has tangled up the whole system?
The driver for the unknown device that appear in Device Manager can be identified very easily.
I recommend this HowTo:
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78You have the Vendor ID and the device ID and the use of these two IDS in pci database would help you to find the right driver.
By the way: If your Wlan and cam n t work, install the drivers matrix, you've already tried this?
-
Hello community,
I recently updated my Qosmio X 500-10T with 64-bit Windows 8 and there is an unknown device listed in the Device Manager with the hardware ID: ACPI\VEN_TOS & DEV_6205
I did some general research on the internet and it seems that it is to do with Bluetooth.
I downloaded the latest version of the software from the Broadcom website (the manufacturer of my Bluetooth device), but this has not solved the problem.In Device Manager, when I try to update the driver by selecting the device in the list (as an automatic search does not find anything), but I can't find the correct Bluetooth module shown: Broadcom BCM2046, an error is listed in the device window indicating that it cannot be started.
Can I get the driver, preferably only (not with other software that is downloaded with the battery Bluetooth)?
I appreciate your help.
Hello
You must install the battery Toshiba BT.
As far as I know the 10 X 500 - t was equipped with a BT module and there BT stack.See this page:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=3461138&PF=trueYou can download here the v of the 9.10.00T Bluetooth stack
-
Qosmio X 770-bar safety edge and peripheral unknown
Hello
a week after the purchase, I decided to replace the OEM Windows 7 Home Premium to Windows 7 Professional.
(I am a student and I need the professional version). Everything works perfectly except the safety edge. With the Windows OEM, it worked fine, but still it no longer responds.When I open the Device Manager there is an unknown device. (Details: ACPI\TOS6205) I don't know what it is.
I hope I explained my problem properly. English is not my mother tongue...
Thank you
Hello
With edge, you mean the buttons illuminated on your laptop, right?
Well for these buttons, you need to install Toshiba Value Package added that you can download from the Toshiba driver download page. This package contains drivers for the illuminated buttons, FN keys, etc. then you need to install it:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversACPI\TOS6205 must be Bluetooth device then install the software portal BT BT:
http://APS2.toshiba-tro.de/Bluetooth/
Maybe you are looking for
-
My Firefox 9.2.1 won't save opening session ID and passwords
My wife and I have five Yahoo e-mail accounts between us and we only use the Firefox browser. We used to get the journal-om identifiers and passwords saved in Firefox, and we did not have to return to our login info. Now, every time we logout of Fire
-
Double slot 2 g 3 G 4 G motorcycle G3
Motorcycle two G3 sims have 4G and 3G capabilities... I have canselect only in Sim 1...
-
LabVIEW dear Experts, I have a USB camera and I would like to use labview to make some simple image manipulation algorithms, problem is that I don't have Vision Development / modules Vision Assistant. I can extract a matrix of pixels of this device t
-
My CDRom device does not i.e.when I put in the disc there is no result.
The driver displays no icon to start to open the contents of the disc.
-
BGP.png Hey guys,. I have a problem with this topology, I'm new to BGP so I will try to understand. (R1) IP route 192.168.2.2 255.255.255.255 209.165.202.130 router bgp 65100The log-neighbor BGP-changes209.165.200.224 netmask 255.255.255.224192.168.2