Tecra PT634E A50 - need details on the SATA controller

Hello

I am looking for detailed specifications of Toshiba Tecra A50 (PT634E-00800JPL).
I need to know what the internal port SATA version.
What is SATA II or SATA III?

I want to change the SSD hard drive and buy the most appropriate.

Install the software of diagnosis equipment freeware like Sisoft SANDRA, Everest Home Edition or HWiNFO32.

These tools provide you with all the essential information on the integrated parts and the HARD disk controller.

Please post feedback would be interesting to know what details SATA controller would be declared by these tools.

Tags: Toshiba

Similar Questions

  • Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

    Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

    We load Windows 7 Enterprise on these newly purchased laptops, but do it have not the required appropriate drivers detect the hard drive on them. Impossible to find on the HP website.

    You can refer to a completely different question here, Marty. I was installing to a flash drive and it turns out that my install media has been connected to ports USB 3.0 on the left rather than right 2.0 ports. Moving to the ancient ports of 2.0 has solved my problem. Good luck.

  • Aurora R4: newly installed SSD running in G2 / SATA300 - how can I 'persuade' the SATA controller to run at G3 /SATA600?

    Good evening.  I was a little indecisive on the place where this post, but I think it's the right place.

    I just replaced the main drive in my Alienware Aurora R4 with a SanDisk Extreme Pro SSD... works perfectly (and quickly).  I realized a clean Windows 10 Pro (x 64), generation to level to the latest version.  I'm not using RAID.

    The SDS is properly installed and connected in the location SATA01.

    This Aurora R4 has the "Dell", well actually "Intel" Patsburg 6 Port SATA AHCI Controller (revised A7), capable of handling G3 / SATA600.  However, two DVD players work to G1 / SATA150 and all four disks are running at G2 / SATA300.

    I have the latest driver for the Intel Rapid Storage Technology technology, confirming a transfer rate SATA 3 Gb/s for my SSD (and the other three HARD drives).

    How can I convince the computer I want to optimize my SanDisk Extreme Pro SSD performance, with the rate of transfer running at G3 / SATA600?

    I searched on through the value of the library of web pages, but not found a solution.  I was hoping that it would be a BIOS problem (installed last), is a question of the SATA controller firmware, but that doesn't seem to be the case.  Technology Intel Rapid Storage Technology driver allows no fiddling, so I drew a blank there.

    Knowledge advice would be warmly received, especially if you have a R4 Aurora that runs a G3 SSD / SATA600!

    Hi Domo_P1000,

    You can search the forums to Alienware for help with this. I found this relevant thread.

  • Satellite L645D-S4025 - need drivers for the SATA RAID controller

    Basically, I need the drivers to load my operating system, because at the time where he leans on my hard drive as unknown. I get BootMGR is missing error, so when I put my Windows 7 disc and go fix it is unclear what operating system is installed.

    So any help will be much appreciated. If you need more just information

    Hey,.

    Have you ever seen the Toshiba page? On this page you can download all the drivers and tools for your laptop:
    http://www.CSD.Toshiba.com/

    For this model with AMD chipset you can find the SATA driver in the display driver package, you must download the display driver. It also contains the SATA driver and chipset.

    But I m wondering why you started this question because there are already several discussions here in the forum about it ;)

  • Need details on the tablespace and storage used by the queue oracel

    Hi all

    I'm working on the lines of the Oracle. I need some details about the storage space of the queues.

    1. is it mandatory that we have space separate for the queue table? What will happen if we run out of table space? Lose us data?
    2. how much storage space is required for a queue of the oracle?

    Please suggest me on this.

    Hello

    946965 wrote:
    1. is it mandatory that we have space separate for the queue table? What will happen if we run out of table space? Lose us data?

    No - it is not necessary to separate queue objects, you can do however purely for the simplicity of space management, but is certainly not a requirement. Space missing in a storage space for a queue is not different to press space to a normal process - Oracle will trigger an error ("ORA-xxxxx cannot extend... ") and the process trying to NQ to the queue will fail or do what it has been coded so that error." So, if your code NQ did something stupid mistake so I guess it's possible loss of data in case of error (not only exhausted space) but in general I'm expecting the process to report the error and stop.

    946965 wrote:
    2. how much storage space is required for a queue of the oracle?

    It is depends entirely on how you plan to use the queues, queues are not generally intended for long-term data storage, they do not perform well for this - they work better with the message in. message on (enqueue | dequeue) so unless you intend to leave messages in the queue for long periods of time I expect no significant space consumption. But only you guys can really work it to according to the type of user data and how long messages remain in the queue.

    There are some useful notes on My Oracle Support on the management of the space occupied by the queues which is very important for performance, for example
    How can I reduce the high watermark (HWM) of advanced queue objects? (Doc ID 421474.1)

    Hope this helps,

    Paul

  • Tecra 9000 running W2k - driver for the Audio controller problem!

    Help, please!

    I have a laptop Toshiba Tecra 9000 and recently discovered that the sound was no longer working. I'm not sure exactly when he first stopped working, but believe it was with MS Windows 2000 Updates or when cleaning PC after spyware attacks. While they inspected the real device (Yamaha AC - XG Audio Device), it has each if useful ""! "with a ' Code 10 - device cannot start", in the "Device status" screen
    I removed the device and allowed windows to detect & install, without success, then downloaded and tried many devices and generic drivers, drivers and
    even later as suggested on a Web of Toshiba site, I find
    http://EU.computers.Toshiba-Europe.com namely;

    Driver date: 22/05/2001 Version: 5.12.1.2138

    I'm at a complete loss as to why it has stopped working and what to try next to try and solve the problem. Any
    help or advice would be greatly appreciated.

    Concerning
    K

    Hello

    It is possible only after the installation of the MS Updates that the audio driver is blocked by a load of your system and no sound can be heard.

    If you want you can try to install this driver:
    http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

    It is useful after installing SP2. I don't know if this will help in your case, but you can try it.

    Good bye

  • Satellite U400-183 lower upgrade to XP - driver for the SATA controller

    Hello

    There is a blue screen during the installation of xp because the missing drivers (SATA controller).
    Could not find the driver, nor on the toshiba Web site on intels.

    Someone who can help? Thank you very much.

    Stefan

    Hello

    Satellite U400-183 seems to belong to the series of PCU44E. Right?
    The European driver Toshiba page provides the drivers for this model.
    You can find on the page of the driver for Win XP Intel Storage Manager and this package contains the SATA drivers.

    But look, man here in the forum, you can find many comments about the installation of the SATA driver why you n t use the search option?

    The best way to install the SATA drivers is the use of nLite.
    He tool free s (you can find it on the internet) and it helps you integrate SATA drivers into the Win XP disc!

    I did it and it worked for me

  • How can I change the SATA controller to ide on hp pavilion dv6-6c50us with windows 7 Home premium? I want to install win xp on my external hard drive.

    while I try to install win xp on my external hard drive using my computer with win 7, an error with blue screen pop out.

    ERROR: 0X0000007E
    ACPI.sys address F73B8D66 base at F73AD000 DATER 41107 27

    You will need to load the BIOS and make the change.

  • Default mode IDE of DCIS vice, is the SATA controller?

    HP Pavilion m7 - 1015dx, Windows 8 Pro, Insyde H20 BIOS F13.

    I would spend my HARD drive to a Samsung 840 Pro series 512 GB SSD. This will be a clean install with Windows 8 Pro DVD and it has been recommended to switch the SATA of IDE controller to AHCI in the BIOS so that the PLATE to serve properly. Problem is when I enter the BIOS "Insyde H20 F13" it seems very limited, and I can't locate Sata to determine if I'm in IDE or ACHI. When I check the TRIM State via the command prompt, I get "disabledeletenotify = 0" which tells me that it is enabled. So does this mean that ACHI is enabled and I have more to worry about this topic?

    It is also recommended to:

    Enable write cache

    Disable disk defragmentation

    Disable disk indexing

    Turn off System Restore

    Disable the Page file "I have 16 GB of RAM"

    Disable Hibernation

    Disable the Prefetch and Superfetch

    Disable ClearPageFileAtShutdown and LargeSystemCache

    You agree with the foregoing during the passage of the HDD to the SDS?

    Hello

    Even if the option is not available in your Bios Menu, the default setting is AHCI.

    You perform a clean installation on the SSD, I suggest to let Windows configure options of the player without any tweaking extra - for example, it should detect the installation is on a SSD and disable disk defragmentation etc.  The only possible exception is that you can disable hibernation.  You will always get opposing points of view on topics such as the pagefile on SSD (and a mechanical drive)-personally I'd always leave it enabled that the OS was designed to use this feature, and I've never really seen any benefit by disabling.

    Kind regards

    DP - K

  • Compatibility of the SATA controller

    I am in the planning phase of construction of an esxi 4.x system equipment and try to get compatibility info sata controller. I searched but the info I found are limited, I looked at the list of compatibility with vmware and they list only 3 controllers, I'm sure that more than these 3 will work.

    Can someone point me to a site that lists the controllers sata that people have tried and worked on facilities there?

    Thank you.

    The hardware compatibility list is on VMware / supported material supplier. You can see http://vm-help.com for a list of hardware not supported that worked. If it is at all a production environment use the VMware HCL. With hardware not supported you risk inconsistency or instability to every update / update.

  • need to replace the SATA cable, cannot find the right

    Hello

    My HARD drive to my motherboard sata cable is broken and I need to replace it and I can't find the right cable, I hope you guys could help me and give me the correct link, I would like to buy an alternative and not of HP parts store

    I have a hp pavilion 2255sb g7

    Thanks for the help!

    Jonathan

    Here is the part number you are looking for:

    Not illustrated material hard drive Kit (includes hard drive support and support)
  • Tecra S3: Driver needed to activate the resolution to 1680 x 1050 on external monitor

    I am looking for a driver for Windows XP that supports an external monitor to 1680 x 1050 on a Tecra S3.
    So far with the Toshiba drivers I can only use 1440 x 900.
    The monitor can be detected through its resolution.

    Is it possible to use two different external monitors?

    Thanks in advance!

    Hello

    1. There is no official driver of Toshiba or Nvidia with this resolution.
    I tested the driver 165.01 http://www.laptopvideo2go.com/drivers with the external resolution 1680 x 1050 and it works very well.
    Download the driver and updated the inf file.

    2. even if you are using the docker, there is no way to use two external monitors connected VGA and DVI simultaneously. This is not supported.
    Only of external solutions with a separate adapter grafics provide (for example Toshiba Dynadock, a usb solution). But from my point of view, all are not very satisfactory.

  • Tecra A5 145 - need info on the machine

    Hej, I have no experience with Tecra A5 (145) esp. on the Norwegian market, y a5 reliable and well-designed machines? can be compared with Fujitsu or Thinkpad is the same price category?
    Thanks for your replies!

    Hello

    Computer laptop Tecra A5 is a very nice unit. This laptop comes with different hardware configurations.
    Check this page for Tecra A5-135
    HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=EU&PRODUCT_ID= 106181 & DISC_MODEL = 0

    http://EU.computers.Toshiba-Europe.com/contents/Toshiba_teg/EU/others/brochures/DSTEA5_0605E.PDF

    The set comes with a disk of 100 GB and different processors (i.e. Intel Pentium M 760 processor)
    Google around and you'll find more information about prices and other similar laptops

  • Urgent - need details on the error Code AIP-51505

    Hello

    I get the following error in the B2B. Previously, the process was working without any problems. I made a change to the ECS and XSD and transferred the same. (I've included the present BAG loop in the IT1 loop according to customer requirement). After you download the ECS and XSD, I get this error.

    SLN03 (Relationship Code) element is missing. Standard option of this element is "required." SLN segment is set in position 200 directive. {br} {br} This element was expected by: {br} {tab} Segment count: 7 {br} {tab} character: 1757

    I checked the payload and I found SLN03 element is get mapped. Please find the message payload.

    <? XML version = "1.0"? > < Transaction-810 xmlns = "urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C" XDataVersion = "1.0" Version = "2002" = "BPEL" Standard CreatedBy = 'X 12' CreatedDate = "" 2009-04 - 28 T 07: 03:41 - 05:00 "GUID ="{34323331-3237-3139-3438-323032323137}"> < ns0:Segment - ST xmlns:ns0 =" urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C "> < ns0:Element - 143 > 810 < / ns0:Element - 143 > < ns0:Element - 329 > #ControlNumber # < / ns0:Element - 329 > < / ns0:Segment - ST > < ns0: Xmlns:ns0 segment-BIG ="urn " ': oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C ' > < ns0:Element - 373 > 20080930 < / ns0:Element - 373 > < ns0:Element - 76 > 5TE9423530 < / ns0:Element - 76 > < ns0:Element - 324 > 2069225 < / ns0:Element - 324 > < ns0:Element - 640 > DR < / ns0:Element - 640 > < / ns0:Segment - GRAND > < ns0:Segment - HEART xmlns:ns0 = "urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C" > < ns0: Element-98 > BY < / ns0 : Element-98 > < ns0:Element - 100 > USD < / ns0:Element - 100 > < / ns0:Segment - HEART > < ns0:Loop - xmlns:ns0 N1 = "urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C ' > < ns0:Segment - N1 > < ns0:Element - 98 > RE < / ns0:Element - 98 > < ns0:Element - 66 > 92 < / ns0:Element - 66 > < ns0:Element - 67 > 3950132 < / ns0:Element - 67 > < / ns0: Segment-N1 > < / ns0 : Loop-N1 > < ns0:Loop - IT1 xmlns:ns0 = "urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C ' > < ns0:Segment - IT1 > < ns0:Element - 350 > 1 < / ns0:Element - 350 > < ns0:Element - 358 > 318288 < / ns0:Element - 358 > < ns0:Element - 355 > EA < / ns0:Element - 355 > < ns0:Element - 212 > 0.006 < / ns0:Element - 212 > < ns0:Element - 235 > BP < / ns0: Element-235 > < ns0 : Element-234 > UPNXXX < / ns0:Element - 234 > < / ns0:Segment - IT1 > < ns0:Loop - PID > < ns0:Segment - PID > < ns0:Element - 349 > F < / ns0:Element - 349 > < ns0:Element - 352 > installed: - < point / ns0:Element - 352 > < / ns0:Segment - PID > < / ns0:Loop - PID > < ns0:Loop - SLN > < ns0:Segment - SLN > < ns0:Element - 350 > 1 < / ns0 : Element-350 > < ns0:Element - 350_1 > 1 < / ns0:Element - 350_1 > < ns0:Element - 662 > I < / ns0:Element - 662 > < ns0:Element - 380 > 318288 < / ns0:Element - 380 > < ns0: Composite-C001 > < ns0:Element - 355_1 > EA < / ns0:Element - 355_1 > < / ns0: Composite-C001 > < ns0:Element - 235_1 > PD < / ns0:Element - 235_1 > < ns0 : Element-234_1 > installed: - < point / ns0:Element - 234_1 > < / ns0:Segment - SLN > < / ns0:Loop - SLN > < / ns0:Loop - IT1 > < ns0:Segment - TDS xmlns:ns0 = "urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C ' > < ns0:Element - 610 > 195843 < / ns0:Element - 610 > < / ns0:Segment - TDS > < ns0:Loop - BAG xmlns:ns0 =" urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C ' > < ns0:Segment - BAG > < ns0 : Element-248 > C < / ns0:Element - 248 > < ns0:Element - 1300 > D240 < / ns0:Element - 1300 > < / ns0:Segment - BAG > < / ns0:Loop - BAG > < ns0:Segment - xmlns:ns0 CTT = "urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C ' > < ns0:Element - 354 > 1 < / ns0:Element - 354 > < / ns0:Segment - TTC > < ns0:Segment - xmlns:ns0 TO =" urn: oracle: integration: b2b:7C0A5F9F470C412CB256ABCF33E4E80C "> < ns0 : Element-96 > #SegmentCount # < / ns0:Element - 96 > < ns0:Element - 329 > #ControlNumber # < / ns0:Element - 329 > < / ns0:Segment - SE > < / Transaction-810 >


    The pointers on this issues would be grateful.


    Thanks in advance,
    Simo

    Published by: user10635261 on April 28, 2009 04:31

    Hi simo,.

    can you please try the second mention of the option in my answer.

    Also. can you please check the segment name is correct in XSD is - this ?

    One last thing, have you tried to validate the XML with XSD generated from the new ECS file?

    Thank you and best regards,
    Prasanna

  • Need drivers for the NETWORK CONTROLLER and PCI DEVICE

    Hi friends,

    I use a laptop PC portable Hp 630. In fact, my portable hard drive was dead, so I bought a new.

    and I tried to install windows 7 ultimate 32 bit operating system. It's over, but the problem is that my WIFI is not working.

    When I go to Device Manager it shows as below...

    And the identification of these devices are as below...

    ID OF PCI DEVICES

    PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC & REV_01
    PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC
    PCI\VEN_10EC & DEV_5209 & CC_FF0000
    PCI\VEN_10EC & DEV_5209 & CC_FF00

    NETWORK CONTROLLER ID

    PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
    PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
    PCI\VEN_168C & DEV_002B & CC_028000
    PCI\VEN_168C & DEV_002B & CC_0280

    GENERIC BLUETOOTH ADAPTER IDS

    USB\VID_03F0 & PID_311D & REV_0001
    USB\VID_03F0 & PID_311D

    So the thing is, based on the above information please suggest me the exact drivers for devices above...

    any response will be appreciated...

    Please help me.

    -AZAAD1982

    Hello

    You need the following.

    WLAN Driver.

    Bluetooth.

    Card reader.

    Kind regards

    DP - K

Maybe you are looking for