Tecra R10-120 - HHD Protection utility installs in Portuguese

Similar Questions

• Tecra R10-120 - issue 3G

  I have a laptop Tecra R10-120, which comes with windows vista or XP.

  The 3G connection worked well in these systems, but I now have a general version of windows 7 installed on my laptop with drivers downloaded from the toshiba site.

  Newspapers in the 3G sim card and the fine network, but when I press the button to connect, it tries to connect for a long time and then disconnected said.
  Toshiba Wireless Manager is configured as the network provider said that it should be (or so I think).

  Can someone help me?

  Hi mate

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=55312

  Maybe this will help you because it's also useful for the other guy

• Tecra R10 - 10W - cannot create partition during installation

  Tecra R10 - 10W I and I went from Vista to XP. I used the Windows XP Toshiba Recovery for this disk.
  I was not able to create the partition on the hard disk during installation.
  I wonder I missed something?

  How to cut my hard drive into 2 parts? Should I re - install XP for it?
  Please help me?

  Thank you

  Alper

  Hello!

  As Akuma writes it of not possible to create or modify partitions of HARD drive during the installation of recovery Toshiba.
  The Toshiba Recovery disk contains an image of the factory settings, and after that you can change the size of the partition yourself.

  I also use Partition Magic and it works really well. If you n t have this tool, you can Google for a freeware tool. ;)

  Good bye

• Tecra R10 - 10W - crashes with the nVidia display driver

  Dear Sirs,

  Two days ago, I bought my new Tecra R10 - 10W. I used the recovery disk to put Windows XP.

  However, I get a blue screen randomly. I turned on the 'Check' tool and I got: error of e/s in wmiaci.sys system. Error 20th in B9B8752F. I figured that the nVidia driver and uninstalled it. The problem disappear. But when I try to install on your site the appropriate driver: display - 20081110130507.zip the system blocks blue with the same error.

  Please help me.

  Hello

  Which is really strange, buddy

  Hmm, I think that before installing the display driver you must clean your system using CCleaner. This freeware tool removes the old driver files and cleans up the registry. Then, restart the installation of the laptop the latest driver on the official website of Toshiba.

  Furthermore, you also update the BIOS? You can find it on the Toshiba site too. :)

• Tecra R10 - 10J - 3 G Broadband F3507G does not

  I have a new toshiba Tecra R10 - 10J
  I went down to windows XP

  Even though the documentation says nothing, I found the thin slot; (it's behind the battery) I put my sim card inside (this sim card works in a usb key with my 3G provider).

  In Device Manager, the toshiba F3507G broadband shows 3 times:
  in network cards
  in the com ports
  in modem

  But when I run the wireless toshiba (version 5) Manager, nothing is known.
  He doesn't seem to see the slot and the device (the shortcut key is also well-positioned to plug brodband)

  I've updated the drivers and firmware from the toshiba website: still the same problem.
  I looked in the Bios: nothing is displayed regarding the brodband modem.

  I don't know what else to do?

  Thanks for your help

  > But when I run the wireless toshiba (version 5) Manager, nothing is known.
  Please post the error here.
  Say the WM? "No modem found"? or "Radio OFF"?

  BTW, did you also install the Toshiba value added package?
  Also, the RF power control utility must be installed.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  It is essential to get the 3G correctly to work.

  > I looked Bios: nothing is displayed regarding the brodband modem.
  It is correct.
  There is no entry in the Bios about 3G.

  Post edited by: Xyran

• Re: HDD Protection utility has stopped working?

  I came just to look at the Toshiba PC Health Monitor yesterday and I saw that my HARD drive protection did not work. I clicked on the drive and all my functions are greyed out and I couldn't allow him once again.

  So I did some research on Google and saw that I'm not the only one having this problem I did what other people did and tried to install the HARD disk Protection software... once again. Well about half way through the installation process, I get the following error:

  * 2753.The error file 'startmenu.exe' is not marked for installation

  and you can click the 'okay' box that automatically closes the program. I don't know what to do now.

  I have a portable Satellite P755-S5269 I bought a week ago.

  Hello

  I studied a bit and it seems that the 2753 error file is not marked for installation appear under different applications so it s not related to the software Toshiba other apps but is generated from the Windows Service install detect old installation of software that cannot be removed.

  I recommend you download and install the Windows Installer Cleanup utility and remove all detected HDD Protection Utility versions.
  In addition, you can also try to clean the registry using the CCleaner.
  Then restart the laptop, download and run the HDD Protection Utility setup once more.

• Tecra R10 and Windows 7

  Tomorrow, I'll get a Tecra with the following specifications:

  Tecra R10 - 14 d
  Type: Processador Intel® Core 2 com tecnologia vPro AP9400, ligacao of rede e Intel® GS45 Express Intel® WiFi Link 5100
  Watch speed: 2.40 GHz
  FSB: 1066 MHz
  level 2: 6 MB cache
  OS: Windows Vista® Business 32 - bit Edition Genuino (pre-wont, recovering HARD disk Toshiba)

  http://PT.computers.Toshiba-Europe.com/innovation/product/Tecra-R10-14d/1071135/toshibaShop/false

  Thus, it comes with W_Vista. Can I just update it W_7 or not? Do I need a driver or something to do the update?

  Very appreciated for any response.

  Best
  Naim

  When you receive your laptop, as a first step please installation of recovery discs using the preinstalled Toshiba Recovery Disk Creator.
  With other words: start preinstalled Vista and DO NOT install Win7 version clean or something because you lose the ability to create recovery discs. These discs you can use in the future if you want to have once again the factory settings.

  Back to your question:
  Tecra R10 is fully supported for Win7 and you have two options. You can do Win7 upgrade using the Toshiba upgrade kit, or you can install install Win7 clean and clean using the facilities of Microsoft disc. If you take decision clean OS install all drivers, tools and utilities that you can find on Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  To be honest I prefer the new installation of the OS.

• Portege M800-107: Power Management & HDD Protection Utility questions!

  Hi all

  I own a Toshiba Portege M800-107, I recently installed windows 7 (ultimate edition), which has improved the capabilities of my laptop. The only problems I see are:

  (1) the utility power management, when I install the necessary drivers on the official page of Toshiba, the problem is that the package of added value is installed without the power management. For now I have more to come the problem using power options offered by Windows 7.

  (2) the biggest problem is the HDD Protection Utility, that whenever I try to install the driver from the official site, it stops the installation with the reason that "material is not supported by this computer.

  Out these problems the laptop works perfectly and quickly.

  If someone could help me with my problems, I would be very much appreciated.

  > 1) utility of the power management, where I install the necessary drivers on the official page of Toshiba, the problem is that the added value package is installed without the power management. For now I have more to come the problem using power options offered by Windows 7.

  There is no special tool of Power Saver for Win 7. Value added package provides a few additional options that you can find in Win 7/Vista power management.

  Check this HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  (> 2) the biggest problem is the HDD Protection Utility, that whenever I try to install the driver from the official site, it stops the installation with the reason that "material is not supported by this computer.

  The HDD Protection Utility using the acceleration sensor built into the computer.
  The point is that there are different M800 market and possibly your M800 does not support acceleration sensor. This could be the reason why you can not install this tool.

• Tecra R10 - 10W - CMOS battery error and the next mistake of bios password

  I have some old Tecra R10 - 10W

  Aftert long in the cupboard, it says CMOS battery error and after charging I can't start on the old password (bios) system.

  How to reset the password of the bios and is also required for cmos battery and I can do it myself?

  I thank...

  You can change battery cmos your np for bios pasword use google auto, I hand a mini hp with the same problem and initiated a program that has been reset using error code when it is inserted the wrong password 3 times into the line, then I used the error code in the program and got the password restarted hp and password inserted now is job bp. Do I have also an old tecra and difrend problem with it, everything in good standing sims but used laptop start first ferry, after several restarsts shovs splash screen, then runing bp, restarted again, same story, it restarts several and then is runing again, leading with outside the same monitor thing, ideas?
  Here is the link for your problem and sulution: http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-bios.html

• Upgrade CPU on Tecra R10

  I wonder if someone might be able to answer a question for me.

  I have a beautiful Tecra R10-11 b and he's been very good for quite a few years. It works under Win XP and did everything he asked without problem.

  I want to know, however, is if it is possible to mount a faster processor. I have a suspicion that the installed processor can be fixed permanently and is not replaceable, but I'd like to know.

  I had played with the idea of replacing the P9400 Intel Core Duo with something a bit new, so maybe install Win 7 and more memory. There are 3 GB of ram installed.

  Any suggestion would be appreciated.

  Parkman

  The CPU is bad, which means that the processor is removable.
  But important fact is that the manufacturers of portable don t CPU upgrade support.
  One of the main reasons is the BIOS which is especially modified by the manufacturers of cell phones.

  But let's start with a few basics:
  The CPU must be supported by the BIOS and chipset.

  So let's ' s check what CPU would be taken in charge by Mobile Intel GS45 Express Chipset, which is part of the Tecra R10 - 11 b
  Here on this page of the Ark from Intel, you can find compatible processors
  http://Ark.Intel.com/products/35505/Intel-82GS45-graphics-and-memory-controller-hub#@compatibility

  But even if the chipset would support new CPUS, some compatibility issues may appear because of the BIOS.
  However, the Intel Core 2 Duo CPU (Penryn Montevina) processor have been equipped in different models of R10, so probably other Intel Core 2 Duo processors are supported.

  By the way: the RAM can be upgraded up to 4 GB of RAM

• Tecra R10 - 10J: BIOS update abandoned "this computer is not supported.

  Hello

  My laptop is a Tecra R10 - 10J PartNumber PTRB1E-00D002FR, 1.40 BIOS version 11/13/2008.

  I recently bought and installed two modules of 4 GB RAM (8 GB). Enter the BIOS setup, I found 8 GB. Windows 7 64 bit also detects the 8 GB, but uses only 3.80! MemTest and diagnosis of CPU - Z are good for all of the 8 GB. I went from RAM modules from one location to another, but nothing has changed. If I replace a module of 4GB by a 2 GB memory, Windows 7 uses 5.80 is going well. Same result as any module of memory of 4 GB or slot I use.

  I suppose that problem comes from the BIOS. The 1.40 version does not support memory mapped IO functionality.

  So I followed the instructions on "http://fr.computers.toshiba-europe.com/innovation/?download_drivers_bios.jsp?" to find the last good package to update BIOS for Tecra R10 - 10J. I downloaded and ran the BIOS310?. exe, but received the error message "this computer is not supported"?

  Can someone tell me how to upgrade my BIOS or did someone has a better idea to activate the full 8 GB of RAM support?

  Thank you for all!

  Axel Limousin

  Hello

  You must install the VAP (value added package) or if this package is already installed, you must reinstall/upgrade to update it.

  Disable the Antivirus software and disable things of security such as firewalls etc.

  Hope that you're lucky...

• Tecra R10 - TPM is locked after the wrong password

  Hello

  I already turned on TPM on my Toshiba Tecra R10. Problem is that I entered wrong password so the secure TPM is locked, it is possible to unlock the TPM without waiting several hours (automatick unlock the TPM)?

  Thanks for any response.

  Dalibor

  Hello

  Have you checked the "TPM guide information line" in the folder utilities Toshiba?

  I found this info on TPM:
  TPM offers a feature to create and define the multiple encryption keys, certificates, and passwords.
  Once set, make sure that the passwords are carefully stored and encryption of files is saved! If these settings are lost or forget, encrypted using the TPM module files cannot be decrypted and encrypted data is not accessible!

  I think that if you forgot the password and didn't create a token, then you will not be able to rest the password.

  But check the line of TPM information guide that should be stored on the laptop.

• Tecra R10 - TrueSuite Access Manager doesn't work with IE8

  Fingerprint software does not start after you install Internet Explorer 8 in my Tecra R10 TrueSuite Access Manager stops working that is when I open a site that requires the login/password.

  I've updated the TrueSuite Access Manager to the latest version 2.5.28.0 but the problem remains. From the console to access the password Bank Manager the program stops responding.

  Operating system: Vista Bussiness 32 bit
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager: 2.5.28.0

  Does anyone have an idea of the problem?

  Thank you.

  Hello

  Have you tested with IE7?
  Did this happen using the preinstalled Toshiba OS and Windows with IE7?

  If this n t happens using the IE7 while there may be a compatibility issue between the two parties; IE8 and TrueSuite Access Manager.

• Don't you entering video using Skype on Tecra R10

  Hello

  I do not receive incoming video on Skype, even when connecting to another pc on the same local network.
  The snapshot works very well, so the connection is there, and my own miniature video is also correct.

  When I resize or move the window of Skype I get a mess of windows that overlap doesn't refresh, so for me it wrong to suggest in the Intel 4500MHD video rendering.

  I tested several PC, ISP, networks, Skype 3.8 and 4.0, and the constant is the Tecra R10.
  The drivers are up to date with own drivers of Toshiba (7.15.10.1527). Anyone has the same problem?

  See you soon,.
  Tiago

  OS: Vista Business 32-bit SP 1

• Tecra R10 you need Intel Turbo Memory?

  Hello
  I intend to change my Vista to XP, and I see that XP does not support Intel turbo memory. But I see no where is the laptop as Intel Turbo memory.

  So my question is is it in Tecra R10 - 10s Intel Turbo Memory

  Thank you

  Akuma thanks for this information. To be honest it was not known to me ;)
  See you soon