Tecra R840 & hi speed duplicator USB not recognize WD 1 TB usb drive

Similar Questions

• My 10.2 final cut does not recognize my Lexar 512 ssd drive which is formatted for Mac Os journaled and completely empty

  My FCPX 10.2 does not recognize my Lexar 512 ssd drive,
  who is formatted for Mac Os journaled and completely empty (already formatted),
  He comes to see my ssd as an SD card once I click an import media.

  I had once FCPX 10.0.8 and with which I was able to edit with my external Lexar 512 GB SSD drive,
  that was seen as a normal external hard drive with all my projects and events.

  I'm not using Time Machine, never used.

  Any thoughts, why can't you do more?

  Here is a screen from my drive information: http://i.imgur.com/3TrITKf.png.
  and here is a screen in FCPX where he sees my ssd as external device: http://i.imgur.com/PB4dgkB.png

  Thank you
  Federico

  SO it is not working properly. The drive is empty. Make a new library and save it on the SSD drive.

• My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive?

  My CD burner will burn the Picture project but in My Documents, my pictures, the CD Wizard does not recognize a CD in the drive? He has already done this, but even when I run back to an earlier date, it does not work. FixIt identified the disc as work, but there must be something missing the program of My Documents.

  Hello

  What program are you using to burn CDs?

  Follow the steps in the link below and check:

  http://support.Microsoft.com/kb/324129

  It will be useful.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• XP does not recognize a second IDE hard drive.

  Summary:
  Added a PATA IDE drive so both are on the same cable.

  System information:
  IBM ThinkCentre P4 2 .66GHz (bought in 2005 approximately)
  Upgraded RAM from 1 GB to?, pin DIMM 184 form factor.
  Hard Drive IDE 1 x 40 GB - Standard - ATA-100-7200 RPM.
  Genuine XP; SP3 downloaded and installed by me.
  MT - M 8187-WBK S/N: KCGL5NB
  8187 is a type for a M50 number.

  My assumptions of hard disk:
  It is Setup to have a disk of expansion under the DVD with separate IDE cables and no doubt when both these are used you are in a primary + secondary situation.  I think that I am looking to get a configuration 'Double' where both are on the same IDE cable.

  Action:
  Removed the floppy drive and put the old HD in its place; It is the primary IDE hard drive.
  Put the new HD located under the old and attached the new cable at the same time.
  Use the power connector of the DVD on the new drive; I could so far to an extension of the extra drive Bay.
  I checked the BIOS boot menus, but could not see anything that needs to be changed.

  Problem:
  The system shows no signs of the new command.
  It still shows the floppy drive.

  I hope you can help,
  Peter

  USB is not supported, and even if that were the case, put the file on a USB drive would significantly reduce the performance of Windows.

  To speed things you can locate the swap file on a separate partition (should be the first partition, about 10 GB is more than enough) on a second hard drive.

  J W Stuart: http://www.pagestart.com

• Computer will not recognize Pro Duo or removable drives.

  Computer Vista will not read my Pro Duo chip, or it will show all removable drives except ROM USB where I have an optical mouse wirelesss connected (when I check my computer).  The import wizard shows only a USB where prior that he showed, f, g, h, etc.

  Thank you.

  Thank you for these two answers, unfortunately the first did not work, and the second deals with USB.  The computer will not recognize any location chip memory, they do not appear on the Import Wizard, or MY computer.  The only two drives that appear are drive C and drive J, which is where I have a wireless mouse hooked up.   Just before this problem I had... and still not... a bottom of screen message "one of the USB devices attached to this computer has malfunctioned... Click this message for more information."  The only connected usb is the mouse, and it works fine.  Solutions that deal with USB issues aren't really questions I have, except that in the future (if the problem remains) USB ports do not appear on my computer either.  Someone who has some said knowledgge I need to re - map the hard drive, or something?

  I really appreciate the time you people consume with it.  Any other ideas?

• Vista does not recognize my edge diskGo flash drive. __

  I just got a new computer with Vista and when I placed my edge deskGo into the USB, my computer does not recognize my backup file on this subject.  He considers that this is on A floppy drive and I don't even have a floppy drive.  I can't see all of the files on my disk.  I think that the diskGo is configured to be compatible with XP but not Vista.  This would be the case?  If so, how can I fix it?  Thank you

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  If they do not have a solution, you will need to buy a new one.

  See you soon. Mick Murphy - Microsoft partner

• Tecra M2 - boot from the USB drive

  Hello
  Why Tecra M2 didn't boot from the USB drive in the BIOS?
  Is posible put in place this function in the new BIOS.

  Good bye

  Hello

  Good questions for Toshiba engineers.
  I don't think there is anything you can do about it. :(

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• Why won't my Windows Media Player rip the CD more? Play selections from the library, but does not recognize the CD in the drive to rip.

  Help, please! I've been rip CDs to the library and everything was fine. Then I put a cd in and I could hear this spin and charge but then... nothing. He said "not responding" in the taskbar above, next to windows media player.
  I closed and reopened it. Different CD. Same thing. I restarted the computer. Once again, an another CD.but the same thing.
  It plays all the songs that are in my library but when I'm in the "rip" tab, there is a message saying to start, "insert a CD into the CD drive. I do and as before, I can hear it spin and charge, but the window of windows media player does not recognize that there is a CD in the drive. In the upper right corner is corner it say 'disc (E)' is this a hardware problem or software? Please help me to solve it!

  http://support.Microsoft.com/GP/mats#tab2
   
  Has a troubleshooting guide automated for you.
   
  --
  ..
  --
  "dee4156" wrote in message news: bc5b21d1-9fa9-48f9-a84a-eb439997ea79...
  > Please help! I've been rip CDs to the library and everything was fine.
  > Then I put a cd in and I could hear this spin and charge but then... nothing.
  > In the taskbar above, he said "no answer" next to windows media
  > player.
  > I closed and reopened it. Different CD. Same thing. I restarted the
  > computer. Once again, an another CD.but the same thing.
  > It plays all the songs that are in my library but when I'm in the "rip".
  > tab, there is a message saying to start, "insert a CD into the CD drive.
  > I do and as before, I can hear it spin and charge but windows support
  > the player window does not recognize that there is a CD in the drive. In the
  > top right corner, it says 'No disc (E)' is this a software or
  > hardware problem? Please help me to solve it!
   
   

• Acer Aspire 5517 does not recognize the DVD in the drive

  I just bought this new laptop last night. The DVD player does not recognize any DVD or CD placed in the tray. All if the player starts but nothing appears on the monitor. I have the auto-play configured to recognize any software install cd/dvd.

  http://support.Acer.com/

  As it is new, it is under warranty.

  Contact Acer A.S.A.P. > and make a claim.

  See you soon. Mick Murphy - Microsoft partner

• computer does not recognize a dvd in the drive

  Hello

  My computer does not recognize the presence of a dvd in one of my two drives, although she acknowledges a CD.  This happens regardless of what dvd I insert.

  Thank you very much

  PAM

  Try this;  Restart your computer before trying again the disc that plays on your DVD player.  If this does not work then there is only one possibility;  your DVD drive is DEAD and you need to replace it, or buy an external CD/DVD drive.    He comes to the end of the mystery.

• do not recognize the cd in the drive

  I bought an old dell with win 7 home premium on it. I try to install ms money 2003 but computer does not recognize that the cd is in the drive it runs other CD or DVD not sure;  does not even recognize the cd in dos.  any suggestion would be appreciated

  Have you tried to clean the CD?  Another option is to download the latest (and last) version of Money.  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20738

• Historical files Windows 8 will not recognize the new external hard drive

  I just bought a new laptop (Sony Vaio) with Windows 8Pro (System op 64-bit, Intel I7, 1THD).  One of the reasons is that I have approached Win8, is I liked the concept of the new 'File History' backup utility  I started to use the computer with an ext WD My Guide of the HD and the history of the files seemed to work.  Then the drive external hard went wrong and I just bought a new WD My Passport 2 t ext HD.  Historical files will not recognize this drive.  He keeps asking the old drive.  When I attached the new drive and go to the screen "Select drive", it says "no usable drives are detected.  Please connect a drive... "I know that the drive is there because I see under 'My computer' and I can copy files to it.  But the history of the files do not recognize.  WD, I called and they helped me to update drivers and even made a update firmware on the drive, but nothing is done.  I tried several fixes suggested in a few links Microsoft 'how file history works... '. «, «What to do if the file history works more...» ", etc, but all without success. The tech also remote BestBuy Geek squad my computer and tried EVERYTHING and could not get it to succeed.  BTW, it's not the HD post because put us on another computer to WIN 8 and Hx file found immediately.  Tech people thought that it was a deep registry with Win 8 problem and their only suggestion was to reimage my computer with the original recovery disk.  But who is going to cost me an arm and a leg.

  I'm not very tech savvy, so I know there must be something very simple, I'm do wrong or overlooking and I hope that some dear soul on this forum or someone from Microsoft can give me an idea or two.  Thank you very much

  I was having this same problem, but then noticed a presentation text easy to miss in the historical files tool that says that the disc "cannot be a part of a library" or something like that. In my case, I had files on my external hard drive that have been included in several libraries... and none that I really used, so I removed the files (and deleted the libraries for good measure). A fast system restart later, and my player does not appear.

  I don't know why MS did not propose it again for this thread as the more obvious thing to check, but there you have it. Something simple and quick to check that could save you some frustration.