Tecra R850-117: RFBus - device could not be started (error not 10)

Similar Questions

• Tecra R850-117 no WiFi after update Windows10

  I tried to update windows 10 TECRA R850-117.
  After update wifi is not found. Had to goback to win7

  Any suggestions what could be done for successful update to win10 with working wifi

  There is probably a WLan driver problem.
  I think you should check if the wireless card is properly recognized in device-> network cards Manager.

  In addition its recommended to uninstall the WLan driver in Device Manager and restart the laptop. Usually Win 10 is expected to begin the search for compatible driver... If this is not the case, you can manually search driver update (also in Device Manager)

  Of course, the laptop must be connected to the internet using LAN

• Tecra R850-117 starts 5 minutes after calving

  My Tecra R850-117 off, it restarts automatically after 5 minutes exactly.

  This is an unwanted behavior because it drains the battery while I don't use the laptop and it could also damage the bearing drive around during the race...

  Anyone know what could cause this problem and how can I stop it? The laptop is 6 months old and I notice this behavior only in recent weeks. I have already noticed that the battery could be emptied after not using it for a few days (probably because of the same issue?), but never noticed the unwanted reboots...

  Thank you very much in advance for all the tips.

  Erik.

  Hello

  You have disabled the wake-up options in the BIOS?
  Check it!
  The permit * wake-up options could power on the laptop, even if the power is turned off.

• Device could not start - Code 10 - Intel Wireless Card on NB550D

  Hello world

  It's just a normal Toshiba NB550D netbook

  The only thing I change is the card inside Wireless: the original is an Atheros common half mini card. Recently, I have the urge to use internet in 5 ghz (frequency).

  So, I decided to replace the old with the * half mini card Intel Wifi Link 5100 AGN *.
  It turns so well. The pilot is not recognized or specifically the windows tries to install the driver but FAIL is reported. Device manager tool shows a "!" next to the network adapter and when I go the properties on the general tab: "* the device could not start - Code 10."

  I tried many ways to uninstall the driver and reinstall it again; also tried to download the drivers from the website of toshiba for the network card intel.

  Nothing works so far and yes I don't know what to do now.

  The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm.

  Please help me solve this problem. I really need to use two strips (2.4 and 5 ghz) internet.
  Appreciate any help!

  > The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm

  Regarding the error code 10:
  http://support.Microsoft.com/kb/943104/en-us

  + The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. +

  I put t think deliver its wireless network card might be a compatibility problem between the BIOS and the wireless network adapter.
  All devices are supported by the BIOS.

  But the WLan card already appears in Device Manager and so I think that there should not be a BIOS compatibility issue.

  Have you checked if the chipset would properly address the Wlan card?

• the bluetooth on my windows 7 64 device could not be installed. where cn I download these drivers

  the bluetooth on my windows 7 64 device could not be installed. where cn I download these drivers

  If the bluetooth device is built into your computer, go to the site of the manufacturer of the computer, search for your computer model number, select the Windows operating system and you will find drivers for your bluetooth devices that are integrated.

  If it is a separate bluetooth device, please search for the device manufacturer's Web site and get the drivers of their support area.

  Additionally, when you install the bluetooth drivers, make sure that the bluetooth device is ENABLED (check the Device Manager) and turned on.

• error "device could not be calibrated" to PXI-5105

  Hello

  I want to calibrate my PXI-5105. But I get an error in MAX and a calibration vi. I tried to install NO-SCOPE 4.1.3 on PXI, but that does not solve the problem. I have labview time real 13.0.1 installed. I enclose the error messages.

  See you soon,.

  Syed

  Syed,

  So there is not a lot of good information on this error.  Automatic calibration works by connecting a known signal that is embedded in the digitizer at the ADC and to adapt the constants and phase shift.  The 234107 error means that there is a problem with this calibration signal or the signal to the ADC path, etc.  This known signal is calibrated during the external calibration and since your device is off external calibration (calibration necessary since February 2011), the problem is probably the calibration signal drifted too far from its known value.

  To resolve this problem, you will need to send the jury in external calibration, and I would recommend National instruments, send it because if there is a problem with the hardware with the Commission, we might be able to solve this problem, as well as of him have calibrated.

  I hope this helps.

  -Nathan

• HP bt500 - your Bluetooth device could not start the search for devices

  Hi, I want to use my HP bt500 to connect my PC to my helmet, but I get the following error message:

  "Your Bluetooth device cannot DΘmarrer him search for devices"

  I downloaded and installed the Windows XP of HP bt500 software version of:
  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&product=3350927

  I tried on two different computers, but they both get the same error.  I took out the bt500 my HP photo printer.  I wonder now if this bt500 is simply limited to only work with printers and not the PC as the other versions of detail.

  Help, please.  Thank you.

  Problem solved.  I had to download the broadcom bluetooth software was last updated.

  www. Broadcom.com/support/bluetoothupdate.php

• How to fix BlackBerry Smartphones? List of the applications on my device could not be dependent.

  I'm using a Blackberry 9700 (v5.0.0.862) and it synch with Desktop Manager v.6.0.0.43.

  DM is correctly synchronize files and data (from outlook and Windows media player). Unfortunately, I can not review the list of applications.  There is actually no load on Desktop Manager.

  -> Message:

  The loading application has been cancel by the user.

  View Applications

  --> The list for applications in your device couldn't be dependent.

  The loading operation was cancelled by the user.

  V6.0.0.38 application loader

  OS: Windows 7 - 64 bit

  How can I solve this problem?

  Dominique

  Hey ryguy2008,

  Try following the steps in this article: www.blackberry.com/btsc/KB13913

  After completing this step, you should be able to continue with the load of the application.

  Let me know if you need help most.

• Windows 10 apple mobile device was able to start

  After trying to update itunes I got the error message that apple Mobile Device could not start. Make sure you have sufficient privileges to start system services.

  ITunes is no longer works on my PC of 10 windows and will not reinstall. How can I reinstall itunes and get it working again?

  You could start by looking to restart the Apple Mobile Device (AMDS) on Windows - Apple Support.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

  TT2

• Apple Mobile Device d\failed to start

  I had to untinstall and reinstall iTunes and now is coming up with the following error I have reinstall

  Service "Apple Mobile Device could not start. Make sure you have sufficient privileges to start system services.

  Any ideas how to solve this problem?

  Thank you

  Hello

  Uninstall/reinstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for XP»

  http://support.Apple.com/kb/ht1925

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• TECRA R850 - not found wireless network controller driver

  Hello

  I reinstalled my computer, since then it does not recognize a wireless or network device
  here - after part of the result of the Toshiba Diagnostics tool
  Device Manager indicates that:
  "The drivers for this device are not installed. (Code 28)
  There is no driver selected for the item or a set of device information.
  To find a driver for this device, click Update driver.
  "

  However I can't find the driver, after update of Windows updates, etc.

  Help, please!

  Thank you
  lavver

  Date of 2013/03/15 22:55:35

  [Information on PC]
  Model name TECRA R850
  Part number PT524E-005014BT
  Serial number 4B021792H
  Version of the OS Microsoft Windows 7 Professional 6.1.7600
  Version of the BIOS Version 3.60
  CPU Intel Core i5 - 2410M 2.30 GHz CPU
  Memory8192MB physical RAM
  Hard drive Capacity304, 562, 036, 736 [bytes] 283.646 [GB]
  Hard drive space free Capacity126, 578, 688, 000 [bytes] 117.886 [GB]
  Video version Intel(r) HD Graphics Family = 8.15.10.2291
  Resolution1366 x 768 Pixels screen
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 6.0.1.6271
  Display Audio Intel (r) version = 6.14.0.3074
  Network version Intel Gigabit Network Connection = 12.2.45.0 82579V = E8:9 D MAC address: 87:EA:3 C: 21
  HUAWEI Mobile Connect - 3G version of the network card = 6, 0, 1, 279 MAC address = 00:1E:10:1F:82:A7
  Modem HUAWEI Mobile Connect - 3 G Modem version = 2.0.6.706
  Internet Explorer9.0.8112.16421
  IDE Device Hitachi HTS723232A7A364
  CARPET * A DVD-RAM UJ8A2AS = 1.00 FW version

  [Diagnostics results]
  CPU TEST DOES PASS
  MEMORY TEST DID PASS
  Enhanced Host Controller - 1C2D)
  Enhanced Host Controller - 1 26)

  i.LINK TEST IS NOT FOUND

  Your Tecra a card ATHEROS 802.11 (B/G/N) WB195-HMC w / BT WLAN inside and all the latest drivers you can find on the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Check it out please.

  This is card with BT, then before you install install driver WLAN BT filter. You can find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Gateway device Managemeny could not pass authentication

  Hello

  We are upgrading of HPDM 4.6 to 4.7 and the keystore file has been deleted in the process. So, we get this log message whenever we try to send a job to one of our machines:

  "Agent denied the task because the device management gateway could not pass authentication".

  I deleted the two files of C:\Windows\xpeagent key on one of the machines and that seems to have solved the problem - for this computer. Repeat this process for ALL our machines would be a daunting task.

  Is there another way to resynchronize the devices with the server, or are we out of luck?

  If we should not touch each machine individually, anyone has advice or scripts to speed up the process?

  Thanks in advance for any advice you can offer!

  I can't figure out how to import the database into the latest version of the client server postgre and I already spent a lot of time on this project. I don't have the password to the database to original then I would probably just be stuck again, in any case. We're going to rename the key on clients computers files for now.  Thanks for your help!