Tecra R850-151 and low screen resolution

Similar Questions

• Headset low volume on Tecra R850-151

  I recently brought + Logitech stereo Headset H110 + for my Toshiba Tecra R850-151 +. + I used a + 3.5 mm 4 Pin to 2 x 3 Pin 3.5 mm Headset Splitter Adapter + to connect.

  The headset works correctly because I tried with another computer.
  And with my Tecra R850 headphones work properly.

  Now, the problem is that the microphone is not recognized with sufficient volume.
  Speech recognition works at halfway green bar goes back very slightly when I speak through the headset, but does not recognize my voice. In advanced options, I tried to change the properties of micro increasing the micro level + up to 100 + and + level of Amplification + dB + 30.0, but still helmet did not properly recognize my speech.

  If someone could help me I would be grateful.

  Hello

  Have you already checked the Realtek HD audio Manager located in the control panel?
  There are various tabs like speakers or Microphone.

  I recommend the microphone tab where you can find different parameters such as the recording level and reading level.

  You can also activate the remove noise that is also part of the mic

• Low screen resolution. Fonts and large icons

  I did a look upward using System Mechanic. Now my desktop icons and fonts are too big and my screen resolution is very poor.

  Have been unable to fix this via the display in Control Panel. How can I fix this.

  Try to perform a restore of the system to a point in time before you ran System Mechanic.

  "How to restore Windows XP to a previous state"

  <>http://support.Microsoft.com/kb/306084 >

  HTH,

  JW

• I can't use the apps because of the low screen resolution page.

  Original title: Low screen resolution.

  I have improved my netbook Acer Aspire One Windows XP to windows 8 and can not use the apps because of the low screen resolution page.  Messages talking about manufacturing change of resolution with Windows 7, but that won't help me. Y at - it something that I can download to increase the resolution of the screen or I will have to consider having someone to install some kind of material?

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Images with lower screen resolutions on Tecra M5 unclear

  Hello

  We have a few M5s with graphics card Intel that works perfectly with the screen resolution of 1024 * 768 usual.
  Now we buy some new ones equipped with nVidia Quadro M5s, and they seem to have a native resolution of 1400 * 1050.

  If I try to measure the resolution 1024 * 768 or 1280 * 1024, the images are badly blurred. But I think that the icons to 1400 * 1050 on a 14 "screen are really too small for the average users.

  No solution?
  Thank you

  Tecra M5 comes with three different views. If you buy one with a higher resolution display, resolution reduced with photo dimmish results.

  Sorry but there is nothing to do. For example, you can connect external monitor with lower resolution.

• How to set the lower screen resolution on HP Pavilion

  I'm trying to figure out if its possible to lower my screen resolution of 800 x 600 on my HP Pavilion Sleekbook 14 - b010us running on Windows 8. I need to do that; It is the only way that I can get my pico projector to run using VGA to HDMI - I tried it with my Sony VAIO and it works perfectly. The lowest setting that I see on my HP is 1024 x 768, and it does not work. Any help? Don't want to have to buy a new projector - this one works very well and the HP laptop has a VGA port

  I came across this same issue using the resolution option custom in the Intel driver manager and has had success using mode low resolution.  I had also edited the registry to force more options.  The registry change which resulted in several resolutions between 1366 x 768 and 1024 x 768, but nothing lower.  Windows 8 is not really designed for lower resolutions (at least, which is not the ideal targeted resolutions), so I guess that would be present on any standard notebook Windows 8.

  However, I have relevΘ this site today to make sure I wasn't overlooking anything... and it seems that I was.  I don't know how I didn't have to check the option advanced settings for more resolutions.  This approach does not require mode low resolution to restart, but it's going to require a screen resolution > avancΘs > list all modes to get 800 x 600 option each time you need.

  Let me know if this has answered your questions.

• On my T400 low screen resolution.

  Maximum screen resolution on my new ThinkPad T400 with dedicated graphics processor (windows 7 Home premium) is only 1280 x 800, I expected to the highest.

  Please advice on what to do.

  ATI Mobility Radeon 3470 with 256 MB

  Thanks in advance.

  IIRC, the choices were 1280 x 800 (WXGA) or 1440 x 900 (WXGA + mine is).  W / models CTO, you had to choose one with the performance of the system.

  Z.

• Fuzzy characters on Tecra 9100 with low screen resolution

  When you use the standard Toshiba S3 for Windows XP video drivers I seem to be having problems with the display when the resolution is equal or less than 1024 x 768.

  Any text on the screen is blurry / weird quality.
  If I select a higher resolution, the screen is good with crisp text / sharp.

  Anyone know how to fix this?

  Thanks in advance.

  Hi Simon

  Don t panic! This isn't a failure or problem
  The native resolution of your internal display had to be greater than 1024 x 768 that is why you have to leave the laptop running with the best possible resolution.

  This issue has already been discussed in this forum. You should check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20874&MessageID=77722

  It may be useful to specify everything

• Tecra M9: After Vista standy, screen resolution changes automatically

  Hello

  I use a Tecra M9 with Vista SP 1. The current display to the nVidia Quadro VNS 130 M graphics card driver is 7.15.11.126
  My native resolution is 1440 x 900, 32-bit color. (the resolution of the screen)
  Sometimes, when the computer comes out of standby, the resolution changes after the sequence to connect to 1280 x 800 and stays that way. I have to manually change back to 1440 x 900. This isn't always happens, but say all of 1 times 2 the computer wakes from sleep.

  What is a (faulty) driver problem?

  Kind regards

  charlieMOGUL

  > Is it a (faulty) driver problem?
  Perhaps this problem could be related to the graphics driver.
  Have you tried to update?

  See European Toshiba driver and update the graphics driver.

• Satellite Pro 4200 and wrong screen resolution

  OK, so I have an old Toshiba Satellite Pro 4200 and I m running windows xp professional on it and I ve been wondering because many programs do not work on it because of the resolution of the screen I want to know if there is a way to change.
  I know usually you access properties etc but when I try to drag, he does not slide remains at 800 x 600.

  So if anyone can help me on what I d really really really appreciate it.

  I'm pretty sure you don't l l install the display driver. It is necessary to use solutions above 800 x 600 screen.

  The drivers, you can download a Toshiba site but don t forget to look in the * Archives * because your laptop is not the most recent:
  http://EU.computers.Toshiba-Europe.com

• Problems with view 4.5 and PCOIP screen resolution.

  I know this question has been asked before, but I have yet to find a solid solution. The last activity that I saw on this was in October 2010, so I thought I would like to start over rather than resurrecting an old thread. Please see below the description of the problem.

  We have a number of XP virtual machines configured in a dynamic pool for our users. The pool settings are configured to allow a maximum of 4 monitors, with a resolution 1920 x 1200 on each monitor max. Users report that when they log in and try to change the resolution, the settings tab in the display properties page disappeared.

  Thanks to this research, I stumbled upon VM KB article 1020809, updated less of a month earlier, indicating a fix for this problem (changing the registry NoDispSettingsPage value to 0). I did it on my main template, however, when users log in is set to 1 return.

  There was also a thread in this forum who suggested changing the option multi-screen in the settings of the Pool to 1, leaving vCenter update, then change it back and then by a stop and start on all machines. I tried as well, but it has not solved this problem.

  Finally, I tried to turn OFF the option to hide the Group Policy Settings Page, but the setting remains at 1. Can I change the resolution of the screen via a script (it does not persist by a closing/opening session, that is another matter), but can not get the settings tab appears.

  I saw there is a model adm for Vista or Windows 7, but I am not mistaken, is there anything more that can be done to XP? I can't understand why this keeps getting ready again to 1 and am hoping that my users will not at all be stuck with a resolution of 1920 x 1200. As a side note, if I change it programmatically, what (s) do I need capture to have persist through a logoff (we use a third-party management tool ProfileUnity call profile)?

  Any thoughts would be much appreciated.
  

  What is the native resolution of the screens in use? I found that view will automatically set resolution in accordance with the native resolution. At least that seems to be the case in my situation.

• I can't drag the arrow to change my screen resolution. He moves only from high to low-nothing in between.

  I can't drag the arrow to change the resolution on my new laptop. He moves only from the highest to lowest - nothing in between.

  Hi Eileen,.

  Thanks for posting the question in the Microsoft Community!

  You can use only the highest and most low screen resolutions available and nothing in between.

  What is brand and model monitor?

  The resolution, you can use is based on the resolution that your monitor supports. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768 pixels and can work well with different resolutions. LCD monitors, also called flat screens and screens of portable computers often support higher resolutions and better suited to a specific resolution.

  The website can provide more information:

  Change your screen resolution

  http://Windows.Microsoft.com/en-in/Windows7/change-your-screen-resolution

  If you need additional help, let us know and we would be happy to help you.

   

• Windows will not update the screen resolution and the color depth

  Out of the blue today, my Windows XP installation had its color depth and screen resolution back to the lowest setting and whenever I try to update it refuses to put up-to-date.

  I even try to restart my computer and a bubble appears downstairs offering reset the color depth and resolution to my automatically.  When I click, it appears as if he's trying to return to normal, but again once nothing happens - the colors and the screen resolution is still at the lowest setting.

  Can any ideas on how I fix?

  Hello

  Here are some things to try to fix it.

  Change the screen resolution.

  "How the resolution screen on Windows XP"

  http://pcsupport.about.com/od/Videocards/HT/screenres.htm

  You can also right-click on an empty desktop > properties > settings > it the slider bar allows you to increase the resolution > Apply > OK > agree in the next window, etc.

  If that fixed it, have damaged you graphic drivers.

  Access the site on your computer or the manufacturer of the graphics card > look for a driver download Section > search for your model number and operating system > get graphics / video / Chipset Drivers (depending on how it is formulated) > download and install.

  Change the screen resolution.

  You can also try a system restore before all these problems started:

  "How to use System Restore in Windows XP"

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

  See you soon.

• Screen resolution problem - is the bare min and there are no other options

  I've upgraded to Vista, a month or two ago and my screen resolution is the bare min and there are no other options better resolution. I tried to update the graphics card but it tells me that it is up-to-date.

  Update your video driver... try the following...

  If you have a portable computer... go to the support site for your computer manufacturer
  and the search for Compatible Vista video drivers updated.

  If you have a desktop computer... go to the website of your video adapter support
  manufacturer and find Compatible Vista video drivers updated.

  The following article can help you find the brand/model/driver version of
  your video card:

  Update Windows Vista graphics driver
  http://www.CGL.UCSF.edu/chimera/graphics/updatevista.html

  If you find a video updated driver... it would be a good idea to create a
  System restore point before you install it. Also be sure to follow all
  installation instructions that may be available on the download site.

  How to create a system restore point in Windows Vista
  http://www.Winhelponline.com/articles/139/1/

• DisplayPort to 2560 x 1440? (Tecra R850)

  Hello

  I think buying a Tecra R850 - 1 8 to connect to a monitor Samsung LS27A850DS (2560 x 1440 px). Both the laptop and the monitor have a DisplayPort, and if I'm not mistaken, the Tecra R850 uses QM67 Express chipset which should support resolutions up to 2560 x 1600.

  However, the Tecra R850 specifications specify a maximum resolution of 2048 x 1536 for the external monitor, what intrigues me. Can someone tell me if the R850 supports a 2560 x 1440 externally via DisplayPort screen?

  Thank you already!

  Hello

  You can download owner's manuals and open the 111 page to find info on DisplayPort, but unfortunately he has no table with the resolutions taken in charge.

  It is listed for HDMI only.
  Try to talk with your local Manager. Maybe they have a show room and you can test it.