Tecra R850 - screen is very low

Similar Questions

• Equium A60-181 screen is very low after reconnection of cable

  My satellite had been very slow lately and I was advised to remove the base and clean the dust fan (I'm quite a novice).

  When I replaced the screw, the screen would not work, but all the power lights were on. I reopened the base and found that a wire was disconnected and rested there. After that, the screen went very dark.

  Any ideas what it could be?

  Any help appreciated.

  Hello

  Uh, I think that it s is probably not a good idea to screw on your machine without having experience with mobile systems.

  Thus, for your problem, try to reconnect the cable but correctly. In the case of no success, it would be useful to bring your machine to a technician or at least to an authorized service partner to check your machine/connections. Maybe they can find the error.

  Welcome them

• Portege R600-11b - screen is very low

  Hello

  The screen on my Portege R600-11b disappeared suddenly extremely dim. There is no problem with him coming back to life after hibernation - but he remains coems back extremely dim. Light blinks until when I press the button in the upper right corner with a symbol of the Sun.

  I think I might need a FL inverter? Do you know how do I know which I need and instructions on how to fit it?

  Also I had problems with Windows 7 Professional turning very slowly. I'm assuming that the two problems are not related.

  Hope you can help, thanks.

  Hello

  I recommend connecting an external monitor.
  If the image on the external monitor would be perfect, then your internal screen or inverter maybe FL needs to be replaced.
  You ask how to check this?
  Well, I'm afraid of each part should be checked using another good part tested m.

  In your case I would ask a support specialist
  Guarantee is valid? If yes then I recommend to contact Toshiba service in your country.

• The screen of very low brightness after a new installation of LED panels

  I recently changed my screen was cracked and paid for it as physical damage are not covered by the warranty of my SVE15136CN. A few days later, the new screen developed a black spot on the left which has increased significantly every day. So I gave him in the center of service again. The service man now says he has changed the screen, but that's a new problem. After the first start, the screen works normally. After a few hours, the brightness is extremely low and not back to normal even after handeling options brightness and power through windows or change the graphics driver. Nor did the change in brightness after plugging in the charger, as it shud be ideally. After three weeks, he suggests that my screen cable is defective not allowing not my screen to win enough power (then how to get enough power to start?) or even the motherboard needs to be repaired for damage. (how it works for the first start?). I feel that something is fishy in this regard. Tell me if it is possible everything that happens? How shud I proceed?

  Hi mihirvd,

  Thank you for considering the Sony community!

  We are sorry to hear the problem you're having with your computer. Another moderator has already answered your question on this thread: VPCEE31FX starts and runs for a while and then the screen turns white can anyone help please

  It's already a hardware problem and we cannot proceed with troubleshooting. We strongly suggest to ensure coordination with the Sony Service Centre. They know the process and they are well informed on how to repair your device.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• I get a pop up screen I need, but the screen is very low and does not allow more than 1 line of information while IE shows the window contextual integers of 27 lines

  I play games that allows me to send gifts to your facebook friends and when I click on send gift, a screen with the names of my friends will be displayed so that I can select the ones to send to... but since yesterday morning, the pop up screen using firefox became so weak that it allows only one line and it does not allow me scroll more than 5 times... While the IE pop-up window shows 27 lines at once, and I can scroll the following 27 and so on... I have pictures of the screen if you need...

  You should be able to resize the window pop - up to enlarge.

  You allow sites resize the popup window?

• After you run a Microsoft FixIt, everything on the screen became very low.

  Microsoft fix it messed up display - I have a monitor CRT - how to fix?

  Please help - the microsoft fix it reset my display settings.  At first, I didn't click that I got the CRT monitor then it sets the parameters as if I did not.  I can't see the screen like this.  It is too small.  Help!

  Hello

  Microsoft Fix it have you trying to run?

  Method 1:

  I suggest you to return the item and try to set the resolution of the screen and check if it helps:

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  See also:

  Common tasks

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_ct.mspx?mfr=true

  Method 2:

  See the article and check if that helps:

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• Tecra R850-151 and low screen resolution

  Good afternoon

  I contact you for realizaros a technical issue concerning a model of Toshiba Tecra R850-151, part no 8b112605h PT525E and the serial number.

  I explain the scenario.

  I installed the laptop in a docking station, this one monitor, keyboard and mouse, I installed the driver downloaded from your site for this model of laptop and operating system and you have set up in screen Intel Graphics and Multimedia Control Panel of operation mode screens clones both screens in resolution 800 x 600 and respect me as an administrator entering the mode of operation of the screen and the resolution the bug is when I have access to the system with another user without administrative privileges, in this case the resolution does not respect me and sometimes not the mode of operation of the screens.

  Please faciliteis a solution to this problem because it is essential that the resolution on both screens and the problem is that entering the system with another user respect me when I accepted the turnstile as an administrator resolution and if I change the theme of the screens or judgment as a user when I turned off the computer and turn it on again you ignore the turnstile. Moreover, I installed the OS twice now and the error persists, and I installed the latest driver that you have on the Web, and before as well and always the same.

  A welcome message.

  Hello

  Did you notice this if you want to use the image of preinstalled Toshiba?
  Retrieve the laptop to factory settings by using the HARD drive recovery and test again.

• Re: Blue screen on Tecra R850-1HU install Win XP Recovery disk

  Hello

  I have a Tecra R850-1HU that comes with windows 7 pro

  I stopped the media recovery for win xp

  The installation is correctly with xp and when I reboot, I see the logo win xp for 1 second and then screen (0x0000007B) Blue

  I try safemode... nothing works

  I have load mini windows xp from a cd and I see all the files on the hard disk from the cd of recovery if it s installed

  I try to put the bios sata to ahci or compatible with the same problem

  I try many times with the same problem on a different machine with the same problem

  The laptop is returned to Toshiba (they have installed win xp from an original cd of microsoft, so I need activation, and I have to do this on 20 computers laptops and good course that no, the toshiba cd creator app, win the dvd...)

  I contact toshiba, I'm not sure that they understand what I want, I got a new dvd of restoration with the same problem

  Anyone has a solution I would be very happy

  Maybe something to change in the bios but I don't know what?

  Thanks for any help

  In General original Toshiba recovery image is tested and should work properly on certain model of laptop. If there is a problem with recovery original you should clarify this with Toshiba directly.
  As far as I know the BIOS should be set to default settings and nothing should be changed in the BIOS settings when you want to use the recovery image.

  All I can imagine is that there is something wrong in the image itself. In the past, I had a similar problem with old Portege 2000.

  Is done: If you want to use the original image you must clarify this with Toshiba. Toshiba must offer good job recovery image. If you want to use own WXP then you must purchase the license for this. Toshiba has nothing to do with the activation of the OS.
  (> I have to do this on 20 computers, laptops and of course not, the toshiba cd soft > creator, win the dvd...)
  How to understand this?
  You want to buy a recovery disk and install it on 20 laptop computers Tecra absolutely identical?

• Headset low volume on Tecra R850-151

  I recently brought + Logitech stereo Headset H110 + for my Toshiba Tecra R850-151 +. + I used a + 3.5 mm 4 Pin to 2 x 3 Pin 3.5 mm Headset Splitter Adapter + to connect.

  The headset works correctly because I tried with another computer.
  And with my Tecra R850 headphones work properly.

  Now, the problem is that the microphone is not recognized with sufficient volume.
  Speech recognition works at halfway green bar goes back very slightly when I speak through the headset, but does not recognize my voice. In advanced options, I tried to change the properties of micro increasing the micro level + up to 100 + and + level of Amplification + dB + 30.0, but still helmet did not properly recognize my speech.

  If someone could help me I would be grateful.

  Hello

  Have you already checked the Realtek HD audio Manager located in the control panel?
  There are various tabs like speakers or Microphone.

  I recommend the microphone tab where you can find different parameters such as the recording level and reading level.

  You can also activate the remove noise that is also part of the mic

• What can not run more than 2 screens on my Tecra R850?

  Despite claims that the R850 (with Radeon graphics card) will be 4 screens, the best I can manage is 2. I am trying to connect 2 external LCD screens and continue to use laptop as another screen (3 in total).

  I did a lot of research, and even if I can find a lot of people having the same problem, I can't find an answer. I tried to update the driver but that caused more problems than it solved. I use W7.

  Can someone tell me how to use more than 2 screens on a Tecra R850?

  Thank you.

  > I am trying to connect 2 external LCD screens and continue to use laptop as another screen (3 in total).

  In this case, you will need to use an external device, like the Dynadock
  http://us.Toshiba.com/computers/accessories/dynadock/

  There are different models on the market check some that would be the best solution for you...

• Tecra A3 has very low volume

  Hi all, I bought a used Tecra A3. With Win XP Professional, service pack 3. I have not all records with him.
  It was working well before a week or two ago. It has very low volume, I have all levels of volume and the maximum wave. The manual volume knob on the front has no effect, it used to work
  I think the problem started when I downloaded youtube FLV files, then I downloaded a program ('super' was the name of the program) to convert the FLV files into AVI files.
  I uninstalled the program of conversion, I failed to convert anything. I've uninstalled and reinstalled the driver of sound card - card his Realtech AC97. I uninstalled and reinstalled WMP11. None of this has helped.

  On this view, I saw how to do a system restore. I thought to perform the system recovery can solve the problem.
  My question is, if I perform the system recovery, to the GET to the elimination of the parameters of the box, it will clear the WIN XP operating system?

  Thanks for any assistance received, Darren.

  Hello Darren

  Please do not be angry on me, but make you it so complicated. Let's be clear on this:

  Saved on DVD of recovery recovery image contains the operating system, all necessary drivers, Toshiba tools and utilities and some additional applications such as a DVD player. So if you want to install the OS by using Toshiba recovery media will be deleted all content saved on the HDD, formatted partitions and lately OS will be installed. When all is finished you will have clean operating system preinstalled. It will be the same State as the first day after the default purchase.

  Then I don't understand what you mean now with the restore process. During the installation of recovery is complete you must not install or configure anything. Just boot OS, install your favorite software, install the Microsoft updates and be happy.

  If you have any other questions please post again, but please if you ask something to be clear and precise.

• M40-285: very low contrast on the screen

  Hello;

  I have a new M40-285, and I found the screen with very little contrast. It always happens, even in the BIOS screen.

  On the lower side of the window, there is always a Flash of light, the background is never 'black', more like a gray.

  I got a M30X and the screen was crisp and Nice. That was the reason on the purchase of an M40.

  The laptop is brand new, I ask for a replacement, or something usual in this model? As I said, M30X screen was wonderful!

  Best regards.

  Hi Fran

  Satellite M40 is well-known for me because one of my friends has a. I can't really understand what exactly is going on with your laptop but try it please use the FN + F7 key combination to set the brightness of the screen up.

  If you are not satisfied, please contact your local dealer and check with him. M40 is a very nice unit with a fantastic design and I believe that there is no hardware problem, just a few bad display setting.

  Good bye

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925

  The very low vertical lines are coming up on the screen in 4 or 5 places on my KDL-65HX925. Sony India assistance team is subscript, but to change the Panel also did not help.

  Now the expensive game is with the service center for over a week and they refuse to return the whole and execution of R & D with no idea. In India, it is better not to go for the set bonus from Sony because they are not able to provide support.

  But people do you have any idea what is the cause?

  I'm sorry to hear what is happening with your TV. Only a technician can diagnose what's wrong with your TV. Unfortunately, we are unable to help customers outside the United States. I suggest that get you in touch with Sony India help on this issue.