Tecra S1: OS cannot recognize the CD Rom after hibernation or standby

Similar Questions

• Tecra M1 does not recognize the DVD drive after replacement

  I am trying to install a new drive CD-RW/DVD-RW on a Tecra M1; However, when the computer does not recognize the drive.

  Is there a solution to this?

  Thank you

  Colin

  For me it s case.
  I would say that the BIOS can't handle the new player properly because of the wrong master/slave/c-salt settings
  Readers slim for computers laptops support setting master/slave/c-salt settings and these settings can only be changed by changing the rider as on desktop drives.
  So it is very important that you purchase a compatible player and supported because disks with incorrect settings will not work.

  Before buying a car, you should ask the service provider to Toshiba for a caught player supported and compatible

• My Satellite A300 cannot recognize the buttons at the top of the page

  I + re-inistalled windows vista and installed everything. They work fine except the buttons that are located above the keyboard. I know that I can verify their status in all programs > Toshiba > utilities > Toshiba Assist, but the problem is that the my notebook cannot recognize the buttons.

  I installed all the software for each hardware but still cannot use the buttons...
  What should I do?

  Have you used the recovery disk when you installed Vista?

  If this isn't the case, you must download and install the Package of added value, which can be downloaded from the Web from Toshiba site in the section support/drivers.

• If I enable security on an ad hoc network, my Windows 7 client cannot recognize the network at all.

  XP host and client windows 7 on ad - hoc network...
  Dear friends, I have set up an ad hoc network between two laptops. The host is running on xp sp3 and the client is running windows 7.
  Now the problem is that if I enable security on the network, the client windows 7 cannot recognize the network at all.
  If I turn off security on the network ad-hoc, everything works fine and I can share files and access the internet on client... Please help

  Ok

  Now, I'm pretty sure that I understand your game up. Well done to get the internet connection, sharing of work (not a simple process) but without encryption.

  I am sure that the problem lies in the Windows 7 laptop (laptop 2). When you switch cell 1 to WEP, you must also pass portable 2 to WEP and provide the WEP key you have configured with laptop 1.

  It's getting late here now, but I'll try to answer tomorrow after I have test it on my two laptops to Windows 7. In the meantime maybe I can point you in the right direction...

  • Right-click the the small icon at the bottom right of your screen on laptop network 2 and then click on Open Network and Sharing Center
  • In network and sharing Center, click on manage networks wireless (nearby at the top left)
  • Click Add, and follow the wizard to create an ad hoc network, selecting WEP and providing the encryption key you configured on the notebook 1
  • Save the network so that you do not have to repeat this procedure.

  Otherwise, when you get to manage wireless networks, if your ad hoc network is already listed...

  • Right-click in your ad hoc network, and then click Properties
  • Click the Security tab
  • Change it to WEP and provide the encryption key
  • Click OK

  Good luck, I will pick up this new after my drowsiness.

  Tricky

• Windows 7 cannot recognize the gt-19300 galaxy s3 driver

  I did a factory reset my Galaxy S3 GT-19300 but now windows 7 cannot recognize the device. Windows is unable to install the driver and it fails.
  Any suggestion is appreciated.

  See you soon,.

  Hello

  I suggest you to update the computer USB drivers and check if it helps.

  Note: Unplug all devices US waiting for the mouse and keyboard before performing these steps.

  (a) click Startand then click on Panel.

  (b) click system and Maintenance, click System, and then click on Device Manager.

  (c) note: If Control Panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to enlarge ""Universal Serial controllers Bus ", right click on the controller host, click"Uninstall"and click"OK"."
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all the elements "Bus USB controllers'.»»

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  For more information, see the links below:

  Updated a hardware driver that is not working properly:
  http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Automatically get recommended drivers and updates for your hardware:
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I also suggest you to contact Samsung Galaxy Support and check whether they have all the drivers available for the gt-19300 driver Galaxy s3.

  Here is the link to contact Support in Samsung Galaxy: http://www.samsung.com/us/support/

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.

• Windows Update has encountered an error and cannot display the requested page after that I click on express update.

  Original title: page Web update always comes back also cannot display the Web page after that I click on express update.

  Page Web I cannot update. Obviolsy I have access to the internet. I tried this several times. I have reintalled windows and I need update Inorder for programs work. Help. I have IE8. XP pro74 free concerts on drive c 400gigs e and d

  Is this the same computer as in this thread previous & abandoned of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/remote-desktop-wont-connect-win-7-to-win-xp-pro/d0995287-356b-4e1f-aa51-1813625b4014

• can't see the Dvd rom after the Update window window 10 7

  can't see the DVD rom after the Update window 10 window 7.

  Hi Michael,

  Thanks for posting your query in Microsoft Community.

  We would be happy to help you with the problem you are facing today. I understand the difficulty that is the problem, and I suggest you follow the methods below:

   

  Method 1: Run the troubleshooter of material and check.

  Follow the steps to run the Troubleshooter:

  a. type Troubleshooting in the search bar and click on it.
  b. click hardware and sound.
  c. click on Windows Media Player DVD and follow the instructions.

  Method 2: Uninstall, reinstall the drivers CD/DVD.

  a. press the Windows key + X , and then click Device Manager

  b. expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
  c. When you are prompted to confirm that you want to remove the device, click OK.
  d. restart the computer.
  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Download/install the driver CD-ROM/DVD-ROM from the computer manufacturer's support Web site.

  Visit the computer manufacturer's support Web site and install the latest driver CD-ROM/DVD-ROM and check.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• System gives a code 19 because it cannot recognize the F: of CD/DVD-ROM drive

  The device is a USB device. Never had this problem before. At the unit for a year, that it is a USB CD/DVD drive. It can be used, however, to initiate the computer... but that's all, the registry does not recognize the drive. BTW, same problem for D: drive CD - RW internal drive that does not work.

  The Microsoft FIX - IT tool did not repair the registry.

  The case is solved after you download the file cdgone.zip. I enabled both decompressed files and they corrected the registry.

  My feeling is that the problem was caused by not using only when not "Remove hardware" tool to stop the USB CD/DVD drive. Never had this problem with the registry before, but one day, I paid the price.

• Update of the question on Satellite Pro L40 - 15A - old BIOS BIOS cannot recognize the EEPROM

  Hello

  I can't Flash my bios.
  I have a Satellite Pro L40 - 15A.

  The Toshiba winflash tool provided with the bios file tells me as the "old BIOS cannot recognize EEPROM.

  I was recommended to use AFUDOS on another forum, but telling me that the bios has a boot not block valid.

  Flas for back FRIEND tells me that the flash rom is write-protected? There is no option in the bios to disable and I don't think that anyone would be stupid enough to put a hardware Bios protect jumper on a laptop.

  Help, please

  THX

  Dear Bruce

  Can you please tell me what you want to do and explain us it please your steps to update the BIOS of your laptop Satellite Pro?

  I did the update of BIOS more than 20 times in the last month and I really wonder what you mean with terms such as EEPROM or AFUDOS. What BIOS update version that you want to use? I assume as 5.10. Am I wrong?

• Tecra P4 not to recognize the new HARD drive

  Hi all

  I have a Tecra P4 - PTS40A-02100V, which does not recognize the new drive of 80 GB Hitachi (HTS541080G9SA00). The laptop is out of warranty and replacement drive was purchased. This is the second new floppy disk that the supplier sent me. The provider is an official supplier of Toshiba in Australia. Customer paid ~ $400AUD to the drive, if that could be a costly exercise.

  I am able to get a vanilla Toshiba restore to work on the PC, but our organization uses WinPE based boot environment PXE for the kickoff of image and the version of Windows XP. It is not possible to use a generic Windows XP in our environment.

  DiskPart in WinPE will not recognize the disc. Partition Magic and other popular applications will recognize the disc, others not. I can create an NTFS partition and format. Can create basic MBR and MFT, no chance to recognize. Also, I can use the drive in a caddy USB Windows XP on another end PC.

  This new drive appear the same questions in a known working P4. I don't see any option in the BIOS to work around the problem. I updated the BIOS to v3.20, but the result is the same.

  Clues?

  Hey Buddy,

  Just to test: is it possible to install Windows from the Toshiba Recovery disk? Have you tested this?

  And interesting to know what the authorized service provider said of this behaviour. Did you already ask guys?

• Tecra 8000 does not recognize the new HARD drive

  I read on this forum and Google search, but nothing helped.

  I think the disk on Tecra 8000 (Pentium II, 266 Mhz) is "dead".
  I tried to replace it with another laptop to see if that would work.

  The laptop does not, even if I put just like the original.
  Y at - it somehow special or what I have to change something in the Bios?

  Hello

  Don t need to change BIOS settings

  As long as you use the compatible HARD disk, the BIOS should recognize the HARD drive automatically without big problems
  What drive did you use? What size, interface, etc.

  The Tecra 8000 is an oldie and I think that you could use only the 4 GB; 6 GB; 9 GB; 10 GB; 14GB IDE hard drives.

  More large hard disks would be not recognized by the BIOS.

• Tecra 8200 does not recognize the RAM in Slot B

  Since a few days my Tecra does not recognize the RAM Module in Slot B. Before everything was fine. I have 2x256MB Modules. I was wondering why my Tecra becomes slower, the last days, and then I saw that I have now only 256 MB of RAM. I have change the slot Modules A to B. I checked also the two modules of RAM with MEMCheck. Both are ok! Just at the moment where I put a RAM for Slot B and none in slot A my Tecra won't start! If I insert the two module my Tecra boots but with just 256 MB of RAM.

  Is there another solution then buying a new laptop? Is my Mainbord damaged?

  I was so contently with my Tecra ;-) so far

  The slot B is probably defective. Only solution for me is to buy compatible 512 MB module and use it in A slot. According to specification for laptop, your device can handle with max 512 MB of RAM.

• Tecra M9 does not recognize the SDHC 4 GB

  Tecra M9, Windows XP

  The internal card reader does not recognize the SDHC 4 GB (provider: "extreme memory"), being inserted in camera or PNA not connected via USB, no problem to read or write to the card.
  No idea how to get the card to work with this card reader?

  Hello

  I have an idea.
  I think that the SDHC 4 GB card is not recognized because a Microsoft patch is not installed on your XP operating system.

  Microsoft has released this document which should help you to solve this problem:

  [Hotfix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards | http://support.microsoft.com/kb/934428]

  Good bye

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.