Tecra S1 - 'ping' the key "N".

Similar Questions

• Tecra A10 - pad touch and the keys do not work on Windows 7 x 64

  We have recently done a new install of Windows 7 x 64 on a Toshiba Tecra A10.
  The operating system has taken over most of the drivers, we had to install drivers for the card reader ourselves.

  Our problem is that the touchpad and the buttons work at all.
  The driver displayed in devices such as manager being installed, but that's all. I even installed the control panel of the Alps (Vista x 64) which works very well.
  Have tried the settings "stick and touchpad are automatically invalidated" when you use an external USB mouse, all to nothing done.

  The equipment worked perfectly okay with Windows 7 32 bit installed.

  Is there a fix here?

  Hello

  Maybe it of just a driver issue, I checked the downloads available for Tecra A10 on page of Toshiba and Windows 7 32 bit there is a newer driver available for Windows 7 64 bits do not (no driver). If you use the Vista 64 bit driver

  What you can do is to test the driver for the touchpad for Tecra A11. There is a version more recent for Windows 7 64 bit of Alps Electric so correct. Touchpad driver is not linked so I sure it will also work on your model of m.

  Take a look at the Web of Toshiba Tecra A11 driver site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Cannot find the @ key in keyboard Tecra A10 - 11 M

  Hi all

  I try to use @ button placed in where is 2, but I can't find the special function or the key combination to enable this.

  Any help will be greatly appreciated.

  Thank you

  John

  Hello

  What do we do with keyboard language you chose?
  Generally the layout of the English (British) should allow the @ by pressing the combination of keys SHIFT and 2.

• Tecra S1 - XP product key is not accepted

  Dear all,

  I have a Tecra S1 where the original hard drive is completely broke down. I put a new hard drive in this laptop and I would like to install windows again. Unfortunately, I don't have the original windows CD that must be delivered with this laptop. Until now, I've tried 3 installation CD but all these CD recognize not the product key at the bottom of my laptop.

  Does anyone know how to get a correct installation CD?
  Anyone know what to change to get the CD here, I must accept the key on the bottom of my computer?

  In advance thank you very much for your help

  Martijn

  Hi Martijn,

  I think you mean the product key on the underside of the computer laptop, right?
  Well, this key doesn't work with normal disks of Microsoft because it s an OEM license key and belongs to the version preinstalled Windows.
  If you install Windows on a normal Microsoft disc, you need to use the key that belongs to this disc!

  You can also install Windows Toshiba Recovery disk, but if you don t have such a disc ask your provider of local service for it.

• Where can I get a new keyboard for my Tecra A3 in the United Kingdom?

  I spilled water - heck! -a couple of days ago on my Tecra A3 and I think it is beyond fixing, but please correct me if I'm wrong.

  I was not clean it regularly and I think there's probably some dust - and other foreign bodies - under the keys and I think that dust got, through the water, in the electronics connecting the keys to the white fabric - I don't know what you call it - the keyboard connecting links for the rest of the machine.

  Most of the keys does not work, and some of them, they work, whey in free, add additional letters for a tap.

  I removed the keyboard and left it and the machine to dry and when has not toured and dried the keyboard and surrounding parts thorougly - working delicately - cleaned using a little bit of alcohol and ear hydrophilic cotton cleaners. I also used a small air pressure producing machine to try to get rid of any dust. I think I did a job just, but it still does not.

  I think I have to buy a new keyboard. Do you know where can I get a new keyboard A3 in England or a second hand keyboard that would be in perfect working order?

  Thanking you in advance,

  Conor Joyce

  Hello

  New parts can be ordered from the ASP from Toshiba (certified partner) in your country. Guys could control the room is not available directly from Toshiba.

  If you want to buy a second hand keyboard, I recommend you research in the internet, ebay, etc.

• Tecra R840-16J - FN keys no function

  Hello

  I have a problem with my Tecra R840-16J. Sometimes, I use the FN keys (the most I use is F6 and F7 for brightness) sometimes I can't! They are disabled singles! And if I press on the window of "windows Mobility Center" ECO button will be displayed and the brightness will be there if the F6/F7 keys are still active and will not be there if the keys are not active more!

  This laptop is driving me crazy! I have Toshiba laptops from the end of 1997 (Ant) working again... with win98 a MX30 which is perfect despite almost 8 years of use intensive Ant sub zero temperatures (I do astrophotography...) but this one which I thought it would be a professional is a great diapointment... !

  Thanks for any help,
  Paulo

  Hello Paulo

  I put t really know what the problem is here and why do you have this problem, but without cleaning preinstalled OS (factory settings) something like that shouldn't happen.

  What you can try is to remove preinstalled Toshiba value added package, restart the system and install the latest version of the Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Please post comments.

• Site to site VPN tunnel - cannot ping the second interface of the firewall peer inside2

  I have two ASA 5505 firewall each with a basic license: FWa and FWb. currently there is a VPN tunnel between them work. I added a second (inside2) interface to the firewall, FWb, but I can't ping firewall FWa, so that I can ping the inside interface of FWa.

  I can ping the FWb inside interface 192.168.20.1 from the FWa inside 172.16.1.1 interface, but I can not ping to the 10.52.100.10 of the FWa FWb inside2 interface. I can not ping the gateway host FWa 10.52.100.1.

  I show the essential configuration of two firewalls as well as the debug icmp output on the two firewalls that I ping the internal interfaces and of FWa FWb inside2.
  =========================================================

  Here is a skeleton of the FWa configuration:

  name 172.16.1.0 network-inside
  name 192.168.20.0 HprCnc Thesys
  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name S.S.S.S outside-interface

  interface Vlan1
  nameif inside
  security-level 100
  IP 172.16.1.1 255.255.255.0
  !
  interface Vlan2
  Description Connection to 777 VLAN to work around static Comast external Modem and IP address.
  nameif outside
  security-level 0
  outside interface IP address 255.255.255.240

  the DM_INLINE_NETWORK_5 object-group network
  network-object HprCnc Thesys 255.255.255.0
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  network-object HprCnc Thesys 255.255.255.0
  ring53-network 255.255.255.0 network-object

  outside-interface of the access-list extended permitted Outside_5_cryptomap ip host object-group DM_INLINE_NETWORK_3
  inside_nat_outbound list extended access allowed inside-network ip, 255.255.255.0 DM_INLINE_NETWORK_5 object-group
  permit access list extended ip host 173.162.149.72 Outside_nat0_outbound aus_asx_uat 255.255.255.0

  NAT (inside) 0 access-list sheep
  NAT (inside) 101-list of access inside_nat_outbound
  NAT (inside) 101 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access Outside_nat0_outbound

  card crypto VPN 5 corresponds to the address Outside_5_cryptomap
  card crypto VPN 5 set pfs Group1
  VPN 5 set peer D.D.D.D crypto card
  VPN 5 value transform-set VPN crypto card
  tunnel-group D.D.D.D type ipsec-l2l
  IPSec-attributes tunnel-Group D.D.D.D
  pre-shared key *.

  =========================================================

  FWb:

  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name 10.51.100.0 ring51-network
  name 10.54.100.0 ring54-network

  interface Vlan1
  nameif inside
  security-level 100
  address 192.168.20.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP D.D.D.D 255.255.255.240
  !
  interface Vlan52
  prior to interface Vlan1
  nameif inside2
  security-level 100
  IP 10.52.100.10 255.255.255.0

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_2 object-group network
  ring52-network 255.255.255.0 network-object
  object-network 192.168.20.0 255.255.255.0
  ring53-network 255.255.255.0 network-object

  inside_nat0_outbound to access extended list ip 192.168.20.0 allow 255.255.255.0 host S.S.S.S
  inside2_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_3 S.S.S.S ip host

  outside_1_cryptomap list extended access allowed object-group DM_INLINE_NETWORK_2 S.S.S.S ip host

  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside2_nat0_outbound (inside2) NAT 0 access list
  NAT (inside2) 1 0.0.0.0 0.0.0.0

  Route inside2 network ring51 255.255.255.0 10.52.100.1 1
  Route inside2 network ring53 255.255.255.0 10.52.100.1 1
  Route inside2 network ring54 255.255.255.0 10.52.100.1 1

  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set pfs Group1
  outside_map game 1 card crypto peer S.S.S.S
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  outside_map interface card crypto outside

  tunnel-group S.S.S.S type ipsec-l2l
  IPSec-attributes tunnel-group S.S.S.S
  pre-shared key *.

  =========================================================================
  I'm Tournai on icmp trace debugging on both firewalls and could see the traffic arriving at the inside2 interface, but never return to FWa.

  Ping Successul FWa inside the interface on FWb

  FWa # ping 192.168.20.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.1, time-out is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.1 ID = 32068 seq = 23510 len = 72
  ! ICMP echo reply to 192.168.20.1 in outside-interface ID = 32068 seq = 23510 len = 72
  ....

  FWb #.
  Echo ICMP of S.S.S.S to 192.168.20.1 ID request = 32068 seq = 23510 len = 72
  ICMP echo reply 192.168.20.1 S.S.S.S ID = 32068 seq = 23510 len = 72
  ==============================================================================
  Successful ping of Fwa on a host connected to the inside interface on FWb

  FWa # ping 192.168.20.15
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.15, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ! ICMP echo reply to 192.168.20.15 in outside-interface ID = seq 50862 = 18608 len = 72
  ...

  FWb #.
  Inside outside:S.S.S.S ICMP echo request: 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ICMP echo reply to Interior: 192.168.20.15 outside:S.S.S.S ID = seq 50862 = 18608 len = 72

  ===========================
  Unsuccessful ping of FWa to inside2 on FWb interface

  FWa # ping 10.52.100.10
  Send 5, echoes ICMP 100 bytes to 10.52.100.10, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ? Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ...

  FWb #.
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  ....

  ==================================================================================

  Unsuccessful ping of Fwa to a host of related UI inside2 on FWb

  FWa # ping 10.52.100.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.52.100.1, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.1 ID = 11842 seq = 15799 len = 72

  FWb #.
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72

  =======================

  Thank you

  Hi odelaporte2,

  Is very probably the "access management" command is not applied in the second inside, only inside primary (see the race management) which will confirm.

  This command can be applied to an interface at a time, for example, if the law is now applied to the inside, it can not be applied to the inside2 at the same time.

  It may be useful

  -Randy-

• Help to apply the key to unlocking EX90 after upgrade

  Hello

  I upgraded an EX90 to TC5 without adding the key to release first.  After the upgrade, I could still access the web page, but I had to unplug the unit to go home and I contacted TAC for the key to unlocking this morning.

  Now I can't the configuration web page to apply the license key.

  Any ideas what the problem is?

  Ricardo.

  You can hava a computer connected to the same network (same switch, same vlan, same IP range).

  Best have a wireshark running on this computer to see if you get something of the endpoint and tell us what is the result.

  * ping to the endpoint

  * ssh access (e.g. PuTTY)

  * telnet

  * https

  * http

  If it does not lead to you what it is, you can try factrory default reset:

  http://www.Tandberg.com/support/video-conferencing-knowledge-base/FAQ-entries/reset-Cisco-Telepresence-ex60-ex90-factory-settings-628.jsp

  The serial cable would need to have the touchscreen connector,... not sure the pinout.

  If this does not work I would increase it to TAC

• How to find the key

  Is there a quick way to find the key of a song or instrumental that has been imported to the logic?

  No, you need a little music for this. I guess you could find it difficult to play with a keyboard and hear/guess the agreements/key?

  Here would be my suggestion for a workaround - if it is an entire song, as you indicate in your question:

  -To get agreements on a Web site

  -See if you can find the original version of keys (that would be easy, right?)

  - Then play these chords along your song imported. If they sound not right, transpose your up and down by steps MIDI track until it sounds right. -> Get your agreements and the key.

  If your song doesn't have agreements to seek, find parts of the song where you lift clear of bass notes (not too much battery), EQ everything, taking Tuner in pop in the track and see if you can pick up the dominant notes. That should lead you to your key of song.

• IPhone 7 will accept multiple fingerprints using the key ID?

  IPhone 7 will accept multiple fingerprints using the key ID?  If so, how?

  My iPhone 5 allows you to set up several fingerprints via settings > Touch ID & password, I doubt that the iPhone 7 would have fewer features.

  (I asked for your message to be moved to the forum from iPhone to help, do not know why you decided to post on the forum to help iPad.)

• How to set the pressure necessary for the keys on the keyboard? I adjusted it 2 years when I had my Macbook Air, but I forgot how I did it. In my opinion, only a touch of F has been used.

  How to address the need to pressure for keys? I've adjusted it 2 years ago when I got my Macbook, but I forgot how. In my opinion, only a touch of F has been used.

  I don't know what you are referring. You can't 'adjust the need to pressure for the keys. The keyboard is what it is. The key must be pressed far enough for electric contact in key switches. The keys are not adjustable in this way.

• They showed me a way to do a massive bowl of spam, but I don't remember the keys and the sequence to do.

  I recently had installed Thunderbird and more 10,000 e-mails were transferred. They showed me a way that if I press Ctrl and another sequence of keys, I could scroll through many emails and send them to 'trash' collectively, instead of having to delete each message individually. I don't remember the keys and the sequence to do.

  CTRL + a (for 'all') will select all of the visible items.

  http://Xenos-email-notes.simplesite.com/417754237

• Change the key of a staff member in the partitions without others changing Editor

  How can I change the key of a staff in the score editor without all the staffs changing to this key?

  http://help.Apple.com/LogicPro/Mac/10.2.3/#/lgcp8535bf38

• How do the key symbol/icon to save passwords to view?

  I would use the password save, but the key icon does not appear anywhere. How do I find/activate/what is the icon so I can record passwords?

  Thank you!

  I assume you have checked that the memory of passwords is enabled:

  • Tools > Options > Security: passwords: "remember passwords for sites".

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Is it possible to remove the "key words" awesome bar, search

  Is there a way to delete / keywords not registered

  For example, there are many songs of guilty pleasure I'll be embraced if someone will see.

  example: Kylie Minogue

  Is it possible to take off and never save any page associated with this keyword 'kylie Minogue '.

  Since this 1, 2, 3 (can see images)

  Same thing for 3 is there a way not to save keywords or save anything in boxes like this

  What about adult stuff (thank God for navigation of PRIVET) <-just be honest here.

  • Clear recent searches from the search bar
  • Delete Web sites suggestions from the Awesome Bar

  When you say keyword, are you referring to them, the keywords associated with a search engine? Research Management > double click on the key word column

  You may also delete the history entries if you put history to remember everything. However, in the location in the Options toolbar settings > privacy > you can change what is research: 'Nothing' or the history and bookmarks.