Tecra S1 windows installation.

Similar Questions

• Re: Blue screen in Tecra A10 during installation of Windows XP

  Hello world

  I try to install XP in a Tecra A10 and I get the blue screen of death each time I try. It's all beautiful download initially, but when it goes to 'Windows Installer', then the blue screen appears. Any ideas?

  Thank you

  I imagine that you didn t include the SATA drivers for Win XP operating system.
  The new models of laptop computers supports the SATA HDD controller and a SATA drivers are required to properly install the Win XP or Vista.

  The SATA drivers are part of the Intel Storage Manager which is on the European driver Toshiba page.

  I recommend the snatch and read some threads here in the forum about the SATA and Intel Matrix Storage Manager drivers

• Tecra M9 - Windows 2000 ACPI

  I am trying to install Windows 2000 on a Tecra M9 (model PTM90).

  I slipstreamed successfully Intel Matrix Storage Controller drivers in my Windows 2000 installation disc, but the Installer Blue-screens in trying to detect the ACPI BIOS. At this point, the stop message tells me I can start Windows installation and press F7 to avoid the ACPI control. I tried and managed to get Windows 2000 is installed, but power management has failed. The laptop detects even when he was running on battery - not very helpful!

  I tried updating to the latest version of the BIOS (1.60), but Windows 2000 install always fails.

  Moreover, most of the hardware works under Windows 2000, even if installers on the Toshiba site claim to be for XP.

  Is anyone know how make ACPI work properly on this laptop under Windows 2000?

  Cheers, Giles.

  Hello

  Uh, you're trying to install what? Why?

  Why are you trying to install an NT-based OS that is as old as your machine, what is VISTA compatible (which doesn't mean you should install Vista :)))
  Gets an old, incompatible and not supported operating system which makes the machine slow (because the socket driver is really not good) and does not work properly.

  If you need advice: remove it and work with a newer operating system. And if you need the computer as a SERVER, use Linux. But avoid the Win2000. :)

  Welcome them

• Tecra A11 - VAP installation failed on Win 7 64 bit error 0x8146045B

  Hello

  I need help. The flash on my phone card tool was out of use. I downloaded the value added package in the 1.3.5 version and tried to install. Installation fail after having extracted the Exe file compressed with the error "Setup PVAT error. [0x8146045B] ". I thougt the error may occure while I not remove the installed software before. So I uninstall the value-added package. After reboot and without installation of value added new package the same error.

  How can I install value added package again?

  Tecra A11, Windows 7 64 bit

  Concerning
  TS

  Hi TSAGI,.

  I had a similar problem with the package of added value, so I also removed the previous version first. But after the reboot, I used the freeware CCleaner tool to clean the registry and delete the old keys of VAP. So just download CCleaner and run it, after this restart again and try to install VAP.

  Check this box!

• Can I do a repair disk for my 10 boot camp windows installation?

  I installed boot camp using the boot camp assistant and not from my own installation disc.  It is provided in the boot camp assistant.  Sometimes I can't start windows and getting a bad_pool_header error.  I am asked to insert an ERD.  How can I make or get a repair disc?  When I open windows and try to make one, I am informed that I can not with this version of windows 10.

  There is no repair under OS X disk to repair Windows. You must use your Windows installation for this disc. Or find a Windows program for such a purpose.

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• How to convert the MBR to GPT to work around Windows Installer error bootcamp

  Hello

  I have a problem as a previous post (8.1 to Windows Installer on iMac with drive fusion, GPT partition error):

  "Hello,

  I have tried to install windows via bootcamp on my iMac and can't seem to fix the "Windows cannot be installed to this disk. The selected disk is the GPT partition style' error.

  I successfully completed all the steps until I'm in Windows Setup and select the partition on which Windows should be installed. I get the error "Windows cannot be installed to this disk. The selected disk is the GPT partition style. "I formatted the partition, but I still get the same error. »

  Trying to get this resolved as soon as POSSIBLE. I have a MacBook Pro 8.2 (early 2011). El Capitan installed. I already disabled SIP. Try to install Windows 10, if possible, or 8.1 if and then to 10. The target volume is disk0s4. I was able to successfully create a Setup disk Windows 10 USB (even on my MBP 2011), thanks -windows-to-create-the-usb-flash-drive-for-mountain-lion-with-updated-boot-camp/ https://mihail.stoynov.com/2013/04/22/force-boot-camp-into-using-an-iso-image-of

  I tried to look around in this forum and elsewhere to solve my problem. I have met help desk 'Loner' of T and hope he can ring for my case. Here is the result of the following commands in a Terminal:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  In addition, I downloaded gDisk but I can't seem to be able to select all the options. Be waiting for instructions.

  Thanks in advance.

  Best,

  Gabriel

  Last login: my Apr 25 14:24:12 on ttys000

  dGabriels-MBP: ~ the gabrielaxel list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Axel HD 937,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Windows 61.7 GB disk0s4 data base

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 15.6 disk1

  1: DOS_FAT_32 WININSTALL 15.6 GB disk1s1

  Gabriels-MBP: ~ list of cs gabrielaxel$ diskutil

  No logical volume group CoreStorage found

  Gabriels-MBP: ~ gabrielaxel$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1831009760 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  1831419400 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1832688936 120574048 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  262151 1953262984

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  Gabriels-MBP: ~ gabrielaxel$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-1831009760] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1831419400-1269536]

  04:07 1023 254 63-1023 254 63 [1832688936-120574048] HPFS/QNX / TO THE

  Gabriels-MBP: ~ gabrielaxel$

  Hello again,

  Due to the time constraint, I went ahead and had a run of luck the orders gdisk on mine. My Bootcamp partition is disk0s4. I get the following error:

  Complete control of the final. About to write data of TPG. THIS WILL OVERWRITE EXISTING

  PARTITIONS!

  Do you want? (Y/N): Y

  OK; new partition table (GPT) GUID written/dev/disk0.

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Abandonment of writing!

  Is it just b/c that I can't make these changes on the disk I am running off?

• The installation failed because the Windows Installer is underway

  I try to install Gmail voice and video chat on my HPTouchsmart and get this error "failed to install because Windows Setup is in progress. Please wait for installers to complete, close all Windows Installer... "But I do not want to install anything else.  Anyone know how to fix this?  I had time to settle down before, but can't remember how I got around it (I remember it was a chore).

  No, no process of Setup running, it's the annoying part.  It is apparently a known issue with Vista.  The solution below is annoying, but came from HP and the only one that I know that works:

• NB100-10 X Windows Installation

  I bought 2 Netbooks NB100. (Ubuntu) Now, I want to install winxp. I used a DVD. external Windows installation has started...--> bluescreen. I used a bootable USB key. Windows Setup-> blue screen. Other Versions of win the same thing. Another DVD - ROM... Similarly. Who is wrong? o.o

  I erased the 0 sector a formatted hard drive with bartpe. But it's the same thing... win2k does not work, too.

  nowt I build the hard drive out and formatted it outside with my laptop, now the installation from the cd works

• Boot Camp Windows Installation 10 - "Windows cannot be installed to this disk. It's the GPT partition style.

  Hello

  I tried to dual boot Windows 10 alongside OS X El Capitan on my iMac 21.5 inch i5 end 2013. I have followed all the instructions in the Boot Camp assistant, restart, choose the yellow 'Windows' drive to boot from, but when I get to the Windows installation, enter the product key and language, and then select the partition (0-4, the partition Disk Partition) it tells me that "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  So I found this answer: How do I install Windows 8.1 on Haswell MBP

  But then I received the same error.

  Tried this: http://macriot.com/mcrt/?p=2362

  But fdisk TPG allow me to change anything, as the SIP is enabled.

  Tried to disable SIP via a command line in a terminal in recovery mode, but got an error-bash: command not found csrutil.

  So now I'm stuck on all fronts. Any ideas?

  Thank you

  RedPanda

  1. your iMac end 2013 supports the facilities of BIOS/MBR and GPT/EFI.

  2. the legacy BIOS/MBR method requires a hybrid MBR.

  3 EFI/GPT is recommended for your specific model.

  4. you can use the GPT Fdisk steps in your link to make your drive a GPT disk only. It is not enough.

  5. you will need to convert the FAT32 partition space using the following OS X Terminal

  diskutil eraseVolume free disk0s4 FREE

  This will return an error, because free space is not associated with disk slices.

  6. at this point, use the USB installer created by the wizard of BC, boot from it and hold down the Alt/Option key and select Boot EFI (not Windows). Point to the portion of the free space that you see after the + 620 MB Recovery HD. It will separate into a small (128 MB) MSR and the rest as MSD (NTFS).

  7. do not install W7 in Boot EFI, because it has some difficulties.

  8. when Windows is installed, and BC drivers are not installed, run setup.exe from the Bootcamp folder.

  9. If csrutil is not found, you are in the recovery of the Internet, because your local Recovery HD is corrupted. The rescue of the failure of the local recovery is restoration of Internet. Your must be on El Capitan. There is no csrutil (or SIP) before El Capitan.

• iMac 2015 Unable to Boot Camp and Windows Installer

  I've been back and forth with a Service guy to customers by phone, but thought I'd throw so the question in the case to see if there were others who have experienced similar problems and might be able to help.

  I have an iMac, retina 5K, 27 - in, end of 2014. It allows to launch the Boot Camp with Windows 8.1, which I put in place about 1 year ago. It worked very well. But then, I decided to try to upgrade to Windows 10 about 3 weeks, which is not well. Decided to erase the partition via the wizard Boot Camp and re - install from scratch.

  Now, I can not install Windows at all. I've tried everything. Using another ISO downloaded from the Windows website. Check disks using first aid. Last night I even totally erased the readers (via the terminal in recovery mode, with the help of the man of CS) and made a "Reinstall internet" of the operating system and then tried in boot camp. Without success.

  I tried to call Microsoft too, but their position on the whole thing is "this is on a Mac, this is the problem to Apple. Bye. »

  Appearances, Assistant Boot Camp is successfully created a partition. The system resets the Windows installation each time and I spend the flow rate of the installation until I get to the section "where you want to install Windows? I select my Bootcamp partition, format and then click Next. That's when I get the error message "we could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

  If I quit the installer and restart on the side OSX, I see that the new partitions is to Windows NTFS, so it seems ok. I am completely puzzled and frustrated as * at this stage.

  Any thoughts? Ideas? Help? Please?

  Data sheet:

  iMac (retina 5K, 27 inches, end of 2014)

  4 GHz of Intel Core i7 processor

  16GB 1600 MHz DDR3 memory

  AMD Radeon R9M295X graphics 4096 MB

  What are the external devices connected to the iMac during the installation of Windows?

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• There is a problem with this Windows Installer package. A program required for this install to complete could not be run Windows 10

  There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update

  Repair Apple Software Update of programs and features, Control Panel, and then try again.

  If not for general advice see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

  Hello

  I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
  I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
  I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

  Any of you have an idea what can do?
  Thank you!

  Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Tecra S3 Windows Explorer crashes on copying files and other actions

  Tecra S3 Windows Explorer crashes frequently on the copy of files and other actions. In the system event log, you find the event ID 26 Application Popup Explorer.exe Application error problem (in Dutch: Toepassingsfout) read write memory error.

  Start the Softex Omnipass Service service. Change the startup type to automatic. The problem will not happen again. You don't have to use this application after the service started.

  Post edited by: wboere

  Hello

  Unfortunately, this path is not easy to say anything because, who know what did you do with OS and how is your personal configuration. If this problem occurs because some time roll back OS to an earlier time using System Restore tool.

  Also check this page useful http://www.helpwithwindows.com/techfiles/explorer-crashes.html maybe you'll find some answers there.

• Windows Installer tries to install the smart web printing

  Hello

  Whenever I click on my computer to open a folder or the Start button, windows installer is trying to install the smart web printing and I get a message error everytime. I have to manually close the window every time.

  I tried to remove the smart web printing from the Control Panel, but it did not work. I also tried to install the new version of the smart web printing and unstall, but it did not work.

  How can I solve this problem? I want to stop windows install tries to install smart web printing every time I open a folder.

  I have Windows 7.

  Thank you very much.

  Mary

  Hello

  Finally I found a way to solve this problem. I typed msconfig in 'run' and not all the HP Smartweb printing and windows elements installer in the startup and services tabs. I have no more problem.

  But thank you very much for your help!