Tecra S1 with Windows 2000 Professional, Modem error

Similar Questions

• What is HP Scanjet Professional 3000 compatible with Windows 2000 Professional?

  is it compatible?

  Hello

  So it is a bussines unit should not be on this Forum, but I checked the spec online and found this:

  Minimum system requirements

  Microsoft® Windows® 7, Windows Vista®: processor 1.3 GHz, 1 GB of RAM (2 GB for 64 - bit); Windows® XP Home Edition, Windows® XP Professional: processor 1.3 GHz, 512 MB RAM; For all systems: 450 MB of available space on the hard drive, USB 1.1 port or higher, CD-ROM drive, SVGA 1024 x 768, 16-bit color monitor

  So that would mean "no sound is not compatible with windows 2000"

• Tecra S1 under Windows 2000 Professional external display problem

  As I can't answer in the original thread (1831), because it is locked, I put here my answer to the answer of the Quad.

  Quad first wanted to know if we have installed the Tecra S1 on a recovery CD.

  No, we do not have. We have created an image that consists of an unattended installation. It is installed from a Windows 2000 RIS server.

  Quad also said that the Fn + F5 is enabled after the installation of the utility Hotkey for display devices.

  We downloaded the hotkey utility, but when we tried to install it we got the error message you "Driver not found" and suspended installation. We have installed as a user with administrator privileges.

  We do something wrong, or this utility owes something to be installed as well?

  Kind regards
  Harro Hofman
  Material specialist

  The Netherlands.

  Hi again Mr. Hofman,

  First of all I must tell you that this is a typical problem. AFAIK Tecra S1 comes with the Professional Windows XP Home edition and optionally with W2000 professional. This two OS has been tested and Toshiba offers all drivers and tools to Toshiba download website.

  It will be interesting how you created this image. What was the basis for this image? You are installed to the first completely Tecra and after created image?

  Have you had problems before the creation of the image?

• The new password I put in my old office with Windows 2000 Professional NT does not work. How can I work around, reset or access somehow. Thank you ttremmel

  It is an old Dell Optiplex 150 with professional nt Windows 2000 software. I have a database of collection of stamp on it, but after having changed my password several months ago, this password does not work. Suggestions on how I can get in? ttremmel

  Hello
  Thanks for posting your query in Microsoft Community.
  From your problem description, I understand that the newly changed password does not work.

  I ask of post you your query on this link

  http://social.technet.Microsoft.com/forums/en-us/categories

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• I'm running an old Dell with Windows 2000 Professional 3800 but am finding less & less compatible software.

  I'm running an old Dell 3800 on 2000 Pro but am finding less & less compatible software.

  Suggestions.

  original title: 2000 pro help

  It's time to retire and recycle that old computer and buy a new one with Windows 7 preinstalled.  Here are a few examples.

• Online videos of YouTube are sped up in Windows 2000 Professional

  Original title: how I slow DOWN the sound on my PC so people don't look like they have not inhaled just helium?

  All of the videos that I play Online are accelerated so people who speak the sound as they inhaled just helium and so not my computer suggest. Help.

  I tried already to decreed the speed of sound on my sound recorder. It did not help.

  Before, I could have played with my volume on my desk (and elsewhere) but I don't remember what I did.

  I also tried to FIND my system restore, but it found no the case, in my startup, control panel and accessories, to restore my computer to its previous state. I even looked in my search for files and programs search results, nothing came. I have a Windows 2000 Professional, Pentium 4.

  Thank you.

  Hello
   
  a. what browser do you use to watch videos online?
  b. is the question that with online videos?
   
  Try turning off hardware acceleration Windows and check if it helps.
   
  To do this, follow these steps:
   
  1 right click on the desktop, and then on the shortcut menu, click Properties.
  2 click the settings tab, and then click Advanced.
  3. click on the Troubleshooting tab.
  4. move the hardware acceleration slider to the third notch.
  5 click OK, and then close.
   
  If the problem is not resolved, I suggest you post your question in this forum, because the problem is with windows 2000 Professional.
   
  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.WindowsME.Internet&cat=en_US_eb0d1b84-5b98-4F60-ab7c-ecd128b885f6&lang=en&CR=us
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I've noticed that my directory the files LR

  I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I noticed that my repertoire records in library view LR does not show images correctly: If there is a folder with subfolders, the folder contains 0 images, but sub records show the correct number of images. What happened and is there a solution? I tried to uninstall Lightroom and re - install, but the problem persists.

  Here is a screenshot of the error message:

  

  Post edited by: Joseph Costanza, Jr.

  See here for a solution.

• Upgrade from Windows 2000 Professional to Windows XP home?

  I bought a new copy of Windows XP Edition family at Frys.  I finally decided to install it when I did it, I get an error:

  XP installation does not support upgrades from Windows 2000 Pro for Windows XP Home Edition.

  However, if I click on "Learn more", I see:

  You can install Windows XP Home with Service Pack 2 or Windows XP Professional with Service Pack 2 on computers that run the following operating systems:

  • Microsoft Windows 98
  • Windows 98 Second edition
  • Windows NT 4.0 Workstation
  • Windows Millennium Edition
  • Windows 2000 Professional
  • Windows XP Home Edition
  • Windows XP Professional

  Who says I can indeed do this configuration.  What the devil do?

  Taken Windows XP supported upgrade paths
  http://support.Microsoft.com/kb/292607

  Microsoft Windows 2000 Professional
  Windows XP Professional Retail (full) version
  Windows XP Professional Upgrade Version

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Satellite Pro 4300 series installation of Windows 2000 Professional

  Hi guys!

  I was given a 2nd hand Satellite Pro 4300 notebook PC series of my brother. Its shows be quite slugglish (over the start time of 20 minutes). I think I'm a format and a new installation of windows 2000 (windows 98se running sound) may be useful. However, I don't have the original recovery disk, although I own an original copy of Windows 2000 Professional.

  Would it not be possible to do a full format and install windows 2000? Or would I meet problems, for example with driver problems, later? I know computers cell phones can be a bit of a nuisance when it comes to facilities OS!

  Any help and advice would be much appreciated!

  Thank you!

  FONZ

  Hello

  Your machine should work very well with Win2K - Toshiba have drivers available for download.

  Kind regards

  Nick

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.

• Windows 2000 Professional and X 61, X61s

  Hello

  • Anyone know if we can install and use windows 2000 Professional on a X 61/X61s (stata questions?)? Is - this dangerous (drivers, potential property damage)?
  • Some drivers are available for windows 2000 Professional. It's loaded with windows 2000 pro recovery disks in?
  • It will improve the battery life?

  Thank you.

  Hi, I had installed on my x 61 for about a year with zero problems of win2k. the reason why I went finally xp was due to new standards unavaiable on 2 k (wga, video hi-def, sdhc, etc.)

  Oh, one thing that does not work: on the card reader sdhc cards. This isn't really a big problem because lack of wga could be...

  for the sata issue I can think of two options: integrate or start in compatibility mode, install the drivers and drivers switch to sata.

  Good luck

• downgrade from windows XP Professional, Windows 2000 Professional

  In order to run an old desk slow with 256 MB of RAM, I try to install windows 2000 Professional and XP to give up, but this work does not have the Windows installation.
  What can I do?
  Thank you.

  Hello

  "but this work does not have the Windows installation."

  Have you changed the Boot order at the start of the Windows 2000 disk to then install it?

  Which will remove all your data but also XP installation.

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  See you soon.

• Windows 2000 Professional and Internet Explorer 6 causes flashing screen

  I have windows 2000 Professional and IE version 6.0.2800.1106.  I have all my screen started flashing when I'm online.  For example, when I watch a video the sound comes through fine but video blinks while it is almost impossible to watch.  Sometimes the pictures flashes also especially if I move my mouse.  When I use mozilla on the same machine, sometimes not.  Nothing happens if I'm not online.  On ie6, if the video has a pop at windows it can be watched, the flash will not occur.  I scanned several times with tools different malware and I do not have a virus.  No idea how to make it stop?  Currently, upgrade is not an option.

  Hello

  Support for Windows 2000 has been arrested. I suggest you visit the link of the article for more information below:

  http://support.Microsoft.com/ph/1131#TAB0

• The upgrade from Windows 2000 Professional to Vista__

  I'm running Windows 2000 Professional and want to upgrade to Vista. According to Microsoft: If your computer is running Windows 2000 Professional or Windows XP Professional x 64, you are entitled to a copy upgrade from one edition of Windows Vista corresponding or better, but a clean install is required. How can I get this upgrade copy?

  Windows Update has nothing to do with the upgrade of Windows. Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistainstall/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Motion le1600 with windows xp professional

  I bought this used Tablet and have a world of trouble.  It came with windows xp professional is installed and a drive recovery... made by the seller.  He began to have problems immediately and now (about 10 hours later) it will not load windows at all.  It has a product key on the back, so I was wondering if there was a way to download and make a new record?  Some would help until I give up completely on that.

  Hello

  1. what issues you experienced with Windows XP?

  2. do you get a code error message when you try to load Windows?

  As you already have a recovery disk, you can use it to reinstall Windows.

  Note: You will lose all data on the computer when you try to reinstall Windows using the recovery disk.

  If you still have problems with Windows and OEM (Original Equipment Manufacturer) computer is a new, I suggest you contact the OEM manufacturer.