Tecra S10 will not start - no response

Similar Questions

• My Tecra S1 will NOT start!

  I have a Toshiba Tecra S1, that will not start. When powered on it gives me a repetitive beep code. The fan starts, only the power light come ON but the screen remains empty.

  The code goes like this: 2 Short emits a beep then one long beep, pause, then 3 short beeps.

  What is the problem with it and what can do?

  Hi Chris

  Of course, there is a hardware problem. Contact service partner in your country. They may include cela beep code. Unfortunately there is no public document on explanation of code.

• Tecra M2 - will not start, the power light is on

  Hi, I wonder if someone out there could help me with a problem?

  I was using my M2 Friday when my friend accidentally hit a very small amount of beverage on the front of my M2, I immediately got up and got a hair dryer on it.

  After leaving it an hour I tried to use and everything worked as before which was a great relief, but a day later, I used the M2 to check my e-mail address when all of a sudden went.

  The power led is on was still and so was the light that indicates I have a CD player, I tried several times and it wouldn't start, so I went again for a day and yesteday morning it seemed that it was starting up only to freeze on the Windows screen, he then returned and he has not started since.

  Could you please give me some advice on what I could do to fix this?

  Kind regards

  Russ

  Hello Russ

  Be realistic. What you can do in this situation? Not much! You can try to start the machine. See if you can get into the BIOS and if yes how long the device will remain on. If unit is running for an extended period, you can try to boot from the CD (for example with the recovery media).

  You can try to connect as another external HARD drive to another laptop and try to back up all your important data and reinstall the OS. More than that is not possible. If there is an electronic failure, it is not easy to fix on your own and support technical investigation just to see what hardware is damaged.

• Tecra M4 - does not start, no image on the monitor

  My Tecra M4 will not start.
  When I turn it on, all I hear is a quick check of the DVD player, a hum of hard drive and fan.

  I tried an external monitor and still see nothing.
  I also changed the ram, tried to start with disconnected HARD drive disconnected RTC battery for a while.

  I don't see anything on the screen at any time.

  Any suggestions?

  Hi TheXenon,

  In your case, I'll try this:
  Remove the battery and the AC adapter at least an hour. Then reconnect the two and try to restart your laptop.

  But at the moment for me that sounds like a hardware malfunction and you need help from a service allowed in your country. :(

• Tecra M9 - does not start after memory upgrade from 1 GB to 3 GB

  I am trying to upgrade my M9 memory with little success. I bought a 2 GB module which is the same existing brand and spec to the 1 GB module, but the PC will not start no matter what options I try. So far I have tried:

  * Addition of 2 GB for the accommodation of extension from below (3 GB total)
  * Withdrawal of module 1 GB under the keyboard and its replacement by the 2 GB module

  None of these options work. The PC gives no beeps or indications that there is a problem, the led lights on the way to the top, the drive led flashes and then it goes into a wait state. Nothing happens.

  For the record, I bought initially upgraded memory that wasn't an exact match and I am now on my 3rd module suspecting a memory compatibility to be the issue. This current 2 GB module seems to fully match the 1 GB as well as being twice the size. It is:

  HYNIX 2GB 2Rx8 PC2 - 5300 s-555-12

  I am running Windows XP SP3

  The TECRA is a PTM91A Intel Duo T700 CPU 1.80 GHz

  Any help would be appreciated

  Hello

  To me it sounds like the new memory module is not functional or not compatible with the laptop. Otherwise the cell would start without any problem.

  If you bought the memory module in a store, you have to take it back and ask for a replacement.

  I n t have experience with Hynix memory modules. For the upgrade of my laptop, I used Kingston memory and it worked without any problem

• Satellite P305-S8820 won't start no-POST 'BLACK SCREEN' will not start up CD

  When the HARD drive is connected Vista does not start, regardless of the boot order. Instead, it shows just a black screen with no cursor. Supplied recovery disks will not start. I removed the HARD drive and ran a scan of the disc to see if the drive went wrong, no dice, the disc is good and works fine via usb-sata on another computer.

  I inserted just the toshiba recovery disk, without HARD drive, and it starts. I connected the external HARD drive now and vista tries to start BSOD, I tried safe mode, last known, everything, nothing works, all get a BSOD disappearing too fast for me to read.

  I searched a dump file on my other computer and was a failure. When the HARD drive is connected via usb vista tries to start and the toshiba cd works now, however, it will not perform a complete installation of factory toshiba it does not find the HARD drive? I'm a windows user and I have years of experience with x 86 programming and windows 32-bit operating systems, but I'm stumped. Bad RAM? Bad Sata? Bad HARD drive? Bad CD/DVD? It is Vista Home premium.

  I don't want to reformat and lose all my data "I AM A REAL 'IT' not a silly computer user" no offense to all the others out there but I refuse just "format and forget ' tools used invites to rebuild the BCD and this does not work either and automatic repair does nothing, recovery does not work as it says there is no recovery points I am frustrated beyond words.

  Finally, this operating system is just horrible, I was once the 'happy' owner of a copy of Windows ME and it does not give me half of the problems that makes this operating system.

  I'm fed up with this, and am half tempted to ask my money for my computer, it might not be the responsibility of the user barely shoot / resolve these problems, they should be addressed before the product was released.

  I am at a loss. Help, please.

  Thank you

  Kevin

  I'm a bit confused with the info given, but if you can not restore/repair Windows, while you should do is back up your data to another PC using a USB adapter, and then run the recovery on the HARD drive internal in the P305.

  You must also update the BIOS.

• Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

  Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

  I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

  Thank you Paul,.

  That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

  

  Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

  Thanks again,

  Eugene

• using Windows vista and supported will not start

  Windows vista help and support will not start. Is it possible to download and re - install this feature.

  In addition to the guidance of Kim, I also recommend looking at responses MVP mind x here.

• Installation of fuse will not start and I can't find it in the application of the CC.

  Installation of fuse will not start and I can't find it in the application of the CC

  Great!

  You are welcome!

  P.S. If you use the Adobe forums, please check useful/correct responses from the staff/helper, if there is.

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• G5 will not start. LED light on. Fans before working.

  Early 2005 G5. running 10.5.8.

  G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

  Sam

  Some of the fundamental things include the pram/clock battery replacement

  since they may be dead; then with a power failure, sometimes the Mac

  do not restart. Usual power management unit & reset NVRAM/PRAM are

  methods that sometimes also used as a troubleshooting measure.

  • Reset the Mac chip power management: (see SMU)

  http://www.thexlab.com/FAQs/resetpmchip.html

  • How to reset NVRAM-LANDAU on your Mac - Apple Support

  A hard reset can sometimes be used, where the power is disconnected

  the logic board and power removed from grill; Then push the Start button / stop.

  (But maybe not. Several PowerMac computers, I had, some people found this helpful)

  You may also remove and reposition cards and other items

  the inside of the case, to be sure they are connected properly. Be sure to not

  In short anything, due to the static load or residual power in the circuits.

  The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

  can help to put it on again. Also sometimes the power supply has some faulty fans,

  circuits or capacitors, so they can be troublesome to repair or replace.

  Good luck in this case!

• Firefox will not start after update

  Firefox will not start today. I think he had an update yesterday.
  Click it, lift the loading symbol, but never implemented. In Task Manager it is a firefox.exe * 32 running. Have you tried to uninstall, delete Mozilla Firefox folder in Program Files x 86 iti also tried to suppress the appdata profile (after saving the Favorites and passwords). I can't even boot up in firefox safe mode and can not get to start Profile Manager. If I start (7 x 64) of windows in safe mode, I can start firefox. I use Norton Internet Security. I checked the settings of firewall smart and experienced of firefox is still set to allow. I tried starting firefox with smart firewall turned off and firefox still refuses to start
  Renounce top almost ready

  Hello ziggy1, as this can sometimes be caused by a malware active on a system, please run a scan with tools of different security like the free version of malwarebytes, the adwcleaner and the scan to microsoft security.

  Fix Firefox problems caused by malicious software

• Carillon of boot loop - start 2011 MBP will not start.

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Check Google for this error, it seems to be common.

  Apparently the startup configuration file is corrupted. These 2 articles can be useful:

  http://www.Hackintosh.computer/?p=67

  https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)