Tecra S11 - 140 - HARD disk Protection works only with windows 10

Similar Questions

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Satellite A-P70-11V - HARD disk protection works without accelerometer?

  Hi all

  I'm new here.
  I did another post. In short, I'm expert enough in Toshiba Satellite laptops, but my new, Satellite P70-A-11V, a portable high professional range, had some problems. It came with Windows 8, which I upgraded to 8.1. Unfortunately, the degraded system so bad that all pendrives made plant. I have connected my Toshiba camcorder, and it also crashed the laptop.

  The search indexing was not working outside the C: drive. The pointer of an optical mouse has started to freeze for seconds on the screen.
  This last I believe was due to the low power USB ports.

  So, I really had no choice after 2 restorations system total and installed Windows 7 Enterprise x 64 SP1. Operating system almost seems ok, but I still have problems, and one of them is that but I'm trying to install the accelerometer utilities, there is no driver.

  I tried that Windows 8 x 64, but just, it does not appear on the list of services.

  I found that the utility of the HARD disk protection was also arrested, I searched this forum and someone said that the Intel Rapid Storage technology must be uninstalled. I did and my HDD is running... but I don't know if it's effective!

  I remember with the 8.1 Windows, the utility always shown a message on the upper right: Vibration is detected, the drive is temporarily closed, etc..

  She has been associated with some high tone sound indicating that the drive has been effectively stopped. Now I can shake it off the laptop, but no message appears, there is no sound.

  I checked all the boxes on the interface of protection of HARD drive to indicate if there are vibrations, but so far nothing. The drive protection is in place and running, but in the absence of use of the accelerometer, the protection of disk HARD just don't know when to act.

  Am I wrong? Can Toshiba fix this?

  All responses are greatly appreciated.

  Hello

  Toshiba drivers and tools available to win 8 or 8.1 to win are not entirely comparable with Toshiba available for Win 7 OS software.
  Some drivers and tools that are available to win 8 don t exist for the Win 7 system.

  For example; commercial accelerometer or HDD Protection Utility released in particular to win 8 / Win system 8.1 and are not available for Win 7.

  But for Win 7, you can find the Toshiba VAP (value added package) and this package installs a range of important services that are an essential component of the Windows system and this PPV will perform the other original programming TOSHIBA works correctly.

  Therefore, you must install the VAP as Toshiba's first tool to ensure that other software such as HDD/SSD Alert Utility or PC Health Monitor

• HP cp1700 printer works only with Windows 8

  My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?

  Problem solved with the driver HP CP1700 for Windows 8

  1 module printer via a usb cable to your pc

  2 turn on your printer and let windows to install the printer

  3. go to control panel of configuration, devices and printers, and locate the hp cp1700

  4. right click, properties, hardware, again, then click on to the left of the change settings tab

  5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot

  6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.

  Hope you enjoy this :)))

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

  I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

  Hello Chad,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

  Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

  I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

  Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

  Thank you.

• Flash CS4 works only with Windows 7 64-bit and Kaspersky Internet Security

  I have a new computer to core i5 Windows 7 64 bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 answers so that it is completely unusable. Uninstall KIS and it works quite well. I already read on another forum that someone of another encounter the same problem with the same combination of products. Does anyone else have this problem amd If Yes, how do you solve? I posted on the forum of Kaspersky without solution so far.

  Norton works OK with Windows 7 (64) and CS4?

  Your chance.  After a week of research I found someone who has thought about it.  Apparently his self-defense of Kaspersky which is causing the problem.  Under options disable control external sevice disable.  For me, that did the trick.  If it does not for you also try to disable self-defense under both options.  Once I did it was moving smooth again.

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• G70-111EM - wireless works only with Windows 7 Professional

  Dear users,

  After 1002 in the factory reset error and not be able to solve this problem. I decided to buy Windows 7 and install it on my laptop, G70-111EM.

  The problem I have now is that I can not can not to wireless internet with.  Wired LAN connection works fine.

  When I press the wireless BUTTON next to the POWER ON BUTTON Wireless market (normally lights up BLUE) OFF wireless connection (normally turns orange).  His watch currently AMBER when I keep it pressed it turns BLUE but after a few seconds goes back to amber.

  All the drivers are installed and control panel shows no conflicts.

  1 has anyone had this same problem.

  2. How can I check what the current wireless hardware I have in the laptop.

  3. If someone can help me with how to know the details of the hardware I can try and find the right driver for this hardware.

  4. I'm going tonight know the name of the driver that is currently installed as part of installing windows 7.

  AMBER LIGHT ON THE LAPTOP FOR WIRELESS

  

  INFORMATION ABOUT WINDOWS AFTER TRYING TO REPAIR

  

  ATTENTION: the download of the software/following links are only for laptop HP G70-111EM! You can find the download appropriate for your specific laptop here: LINK

  I am sure that I have the solution for you! And I'm quite depressed by the inability of HP, its employees and support their policy update

  So, there are some steps to follow, to get your Wlan rerun. To be exact: you could 'fix' in one step! But please use my complete guide, step by step! So here go us:

  1. first of all, you must use the latest version of the Bios (January 2011): update of the HP Bios

  2 run 'Windows 7 Mobility Center' by pressing the 'Windows key + X' or via your control panel (HowTo).

  3 here you can see a section 'Wireless Network '. Can you turn it on, by clicking on the button? Or is it greyed out and disabled? -Let me guess: you can not click on the button, it is grayed out? ...   Because I am sure that you could not improve the situation with previous measures, let's go on.

  4. download the HP Quick Launch Buttons for your laptop and install it.

  5 restart.

  6 always: any improvements to date? (I guess: no!)

  7 as a next step, download the HP Wireless Assistant and install it.

  8 restart.

  9 now the most important step - revive us your wireless network: click on "Start" (Windows logo), enter "assistant wireless" in the search field and select Assistant HP wireless list.

  10 upward and running, you should see your device wlan under "wireless devices installed:

  

  Click on 'Properties' and you will see ~ 4 boxes that you can check/Enable. One box ISC 'independent controls for wireless devices. Make sure that this box has a tick inside and click on apply, then when you return to the wireless assistant there should be a box that says "light" click here and my wireless turned blue immediately. However...

  11. .. . If the "Turn On" button is grayed out (yet), you have just to press the orange-light-without wire-hardware button on your laptop once. After a few seconds, the color of the 'Activate' button should change its color and you should now be able to click on it!

  I have it?

  I have this problem, too. My laptop (Presario CQ-60) HP has also incorporated this Atheros wireless card.

  

  Try almost everything that I'm still not able to reproduce the situation that suddenly off the wireless card.

  I suspect the energy options of Windows to disable the wireless card, but I'm not sure. That's why I disabled all options regarding the WLAN to save energy. This means that in advanced of ALL power management options you have prevent energy saving on the network WiFi Windows and in Device Manager stop driver wireless in its properties to disable the card in order to save energy. Here is a step by step guide:

  

  Once again: I don't know if this can help. So give it a try.

  Aside from that is not a real solution, it is only a workaround. Hewlett-Packard could not help me either, they just sent me a new wireless card. In addition they me too (as mentioned above), to reactivate the wlan module in the Bios - BUT here the same power options: there is no such option cause they cut down the Bios extremely * argh * that makes me angry!

  For ME, it is clear as mud: there is a serious bug! Whether it's a Bios, OS, wireless card/hardware or a driver/software problem is hard to say. But proposals to uninstall and reinstall the driver of a news/other/more late/old/whatever are worthless. It seems that a command indicates to the wireless card to turn off completely. And a new driver, or a restart, Windows Mobility Center or a handstand can revive - only the HP Wireless Assistant (and a complete new installation of Windows 7 for as far as I remember)!

  Interesting is also that if you turn service wireless using Windows (Windows key + X) Mobility Center, can't revive using the HP wireless Assistant, but only with the Microsoft tool. And as we have seen it is the same vice versa. But why? It's so absurd and unnecessary complicated. In fact, I never had installed HP Wireless Assistant under Windows 7. Therefore whenever this occurs, install the HP Wizard to get rid of this annoying bug. But I don't want to have this additional and unnecessary software on my PC.

  In addition: the bug persists.

  Hewlett-Packard, it's your turn!

  PS: I'm done with Microsofts Atheros function of the window update driver. In my case it connects faster than any other driver found on the internet (I also tested those on the Czech Atheros unofficial site)...

  PPS: Hope I could help

• NB100 3 G Ericsson F3507g works only with Windows 7

  I did everything and I can't get it to work under Windows 7, although it works on Windows XP.
  I already updated the firmware of the modem to the last R1D06 (I had to downgrade to XP to do it, because in windows 7, program reviews "No module" find.)
  I installed the latest drivers for win 7 32 Toshiba, as well as the latest Wireless Manager (R2V2)
  What is happening is as follows. I start Wireless Manager, and request the SIM PIN code. After I insert the code PIN SIM "success" icon appears. After a few seconds of this 'Success' icon the icon "the mobile broadband device is not found" is displayed briefly and then the animation "initializing the device mobile brodband" appears... After the PIN code request page back... If I insert the PIN again once I have the same story...
  Can someone please help me, because it's driving me crazy?
  Thank you.
  Manuel Quinaz

  Hey Buddy,

  This really strange story... I tested the modem 3G with Windows 7 and the drivers of Toshiba page. In my case it works correctly, I have problems.
  The only problem I've had is that the SIM card was not recognized, but the solution was a simple reboot.

  You have another SIM card that you can test? The SIM isn't working properly and to test another might be worth a try. ;)

• On Satellite A200 (PSAE6E) FN key works only with Windows XP Home edition

  Hello

  I just get my Toshiba Satellite A200-2BH, (PSAE6E), included with windows Vista. I'm not comfortable with that OS so I formatted the hard drive and install win XP pro SP3 all seem to be fine with the driver downloaded from driver support Toshiba on the line, but the FN key do not work in certain combinations, for example:
  FN + F5 or + F6 or + F7 do not work
  someone say online in this forum that I should install updated BIOS, but this note on the Toshiba support website me resist:

  * "This Bios update adds functionality to your system *."
  * This Bios is NOT compatible for notebook computers equipped with Windows Vista! "*

  What should I do?
  My current setup is:
  Satellite A200 PSAE6E with WXP PRO SP3 with the FN key does not
  Should I install this update to fix this problem?

  Please help me with the path I should follow
  Thank you very much

  FN feature under Windows XP Home edition is supported with the latest version of the BIOS update. So don't be afraid. Download the right BIOS update and update Windows XP Home edition.
  Before start you BIOS updated to close all running applications and make sure that the laptop is connected to the power supply do not do this with battery power!

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.

• DeskJet F4180: F4180 driver works only with Windows 10

  Printer prints all bad, except the dark colors. Turns red magenta, green is dark blue etc.

  Printer worked fine with win xp.

  Test page prints perfectly without error

  Using the prints to photocopy an exact color copy - it's just data coming directly from the computer which is incorrect, so the work of does'nt driver properly with win 10. I checked that I have the latest version of the driver 6.1.7600.16385.

  I have noted this problem has already been spotted upward - when a new driver is available?

  or can anyone suggest a work around.

  Printer I tried with my laptop win10 and the fault has been the same.

  Printer I tried with my old desktop winxp and the rift was healed - perfect impression of a jpeg file.

  Reconnected printer back on my desk win10 and printed on the same jpeg file and printing was perfect!

  Have you tried a few other files that I had problems with and prints are very well - can only be assumed that the problem was down to the usb connector.

  Thanks for the help

  Concerning

• Java works only with windows 7, I think.

  OK I do not know exactly what the problem is, my best guess is that windows 7 is not letting me use whatever it is related to java. I made sure that I had the most current version of java, when download it even said that it is compatible with windows 7. Once the download is complete there is a link, you can click on "test if java works properly" (or something in that sense) but when I click on all my browsers just closed. I use firefox, but I also had the same problem trying to access java with IE. Another example of this problem is when I try to play games on Funorb (a gaming site that uses mainly Java) or if I try to play Runescape. As soon as I click 'Play' on runescape or funorb all my browsers close.

  Another problem I had is whenever I restart my computer, and then turn on again, I can not connect to the internet. For some reason, I have two networks that I am connected. First of all is a home network, and the second is a unknown audience network. I have no idea whence this public network. The only way I can get rid of him, in so doing, I find my access to the internet, is to disable all the 'connections to the Local network' and then allow them once again. For some reason, this makes the unknown to go and I can get on the internet... but still I can't access java games or test to see if java is working.

  If nobody knows how to solve this problem, then please tell me how I can uninstall Windows 7 and hope return to Wal-Mart for a full refund... I would rather not waste my money

  Thanks for your reply, but I thought about it.

  For some reason any my download Java, somehow did not work properly. After I uninstalled and reinstalled Java (TWICE the first time I did it, he did not always work) it works great.

• Programs work only with windows vista

  I've had nothing but trouble with my new computer and am more convinced, it's because of Vista.  Every program that I buy, which says compatible with vista doesn't work properly or at all.  The most recent is Adobe Photoshop Elements 7.  It worked 'ok' for a short period and now does not start at all.  I uninstalled and reinstalled several times, and I get the same message "not responding".  I bought other programs and had to take them because they would not work with vista.  I also have a lot of programs that I can't use because they are not compatible with vista.  When I bought my computer, I asked for XP and learned from Dell that it came only with Vista... What I want to know is can I get a refund for vista so I can get an operating system that works?  Thank you.

  There may be a problem with the operating system.  Programs you cite have no problems on my computer and I have not heard of them being problems on someone elses.

  XP has not been for sale for a few years.  Any refund is Dell.  What edition of Vista do you have?  You can use the recovery software and restore your computer as long as the plant and start over.

  Colin Barnhorst