Tecra S11 - CPU fan is high speed

Similar Questions

• zbook u15: fan at high speed after installed windows 10

  Yesterday, I updated to windows 7 pro for windows 10 pro.  I have rarely heard my fan in windows 7 and only when I was cad or had a large number of open images.  With 10 windows, my fan is at high speed all the time.

  Suggestions?

  Ok

  Found two programs running that caused the fan to high speed.

  One was post 2012 31% of the processor chips

  other was

  AlertusDesktop or 32% of the processor.

  E-mail private, removed the Alertusdesktop for now and normal operation.

  Thank you!

• CPU fan run full speed constantly

  I bought a Pavilion Elite m9510f liquidation of Circuit City a week and half ago. Big mistake... because I can't look upon return, but anyway. The compters CPU right at full speed, the box fan works all the time. When I call the technical support they had me check the connection of the fan to the motherboard and set power options to save energy. Problem still exists. They had me also pull the video card to be sure it wasn't this fan, but it was not. They tried to tell me that this is normal... No way should the CPU fan spin full speed all the time. I have no patients must remember and discuss with them righ now since I spent 3 hours on tech support Saturday for a new LAN card wireless, sent me. ERRRR.

  Any help would be appreciated.

  P.S. I downloaded Speedfan to check my cpu core temp and it all say core 4 times are are hormaux 35 c or lower. So I don't think that I have an overheating problem.

  Your pc has 2 BIOS updates. 5.32 5.35 second updated and contains a fix for the problems of your siding.

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&DLC=en&cc=us&product=3876397&lang=en

• HP Z820 workstation: Z820 HP does start, fans at high speed, no BIOS, no signal in the monitor.

  Hello world

  My listing of workstation: HP Z820, Dual Xeon E5-2687W @ 3.1 - 3, 8 GHz, graphic card Nvidia quadro K5000, 64 GB RAM, 2 x 500 GB HARD drive.
  The workstation is still under warranty.

  They arrived after upgrade to Windows 10 (from 8.1 to Windows) and put such BIOS updated as recommended by HP support Assistant.

  I was on the process to refresh the 10 Windows , then the system automatically tried rebooting to complete the update, but he never did it again! and then the fans running at full speed. After waiting for 2-3 minutes, I had to hold the power button to turn off the computer.

  After waiting for about 10 minutes, I tried to start the computer, but the same thing happened: you press the button power and then after about a minute , fans rotating at high speed, no signal, no BIOS, no noise, no power in the keyboard or mouse, the blue LED light to the rear.

  So I let the computer without power for 7 hours... (The power cable is disconnected).

  At 11:00: reconnected the power cable (HDD and DVD ROM are DISCONNECTED) and tried to start but the same thing happened.

  Now, I'm on google to find a solution:

  1. power? (Have not yet been tested food.)
  2 motherboard? No damage to the capacitors or anything else.
  3 reset the BIOS/CMOS? (Power disconnected cable) Removed the battery and put it back it, held the CMOS button for 5 seconds.
  4 graphics card? Replaced the K5000 Quadro with a Quadro 4000.
  5. exercise of the power of the system? held the power button with the power cord unplugged for 30 seconds.

  None of the above solves the problem but now when you press the power button / the fans start to run at high speed immediately! This got worse?

  Any help would be greatly appreciated. Thank you.

  The problem is a faulty motherboard and it was replaced under warranty.

• Tecra S11 CPU high slope noise v2.0 RELOADED

  Someone at - it BIOS update for this well known problem of the Intel CPU?

  I spoke to my local PSA and he always said that it will help and it will get this patch. He said, yes the next week, then next week then next week... funny. «Professional» Toshiba service partner chartered

  There was no updated BIOS for this issue on 6 months now @ toshiba BIOS download page.

  Should I do if ASP cannot stop and Toshiba may also not release a patch of BIOS for this annoying error sound.

  (Please do not close this thread because it is an existing problem!)

  I put t think that your son will be closed. We are here to discuss all issues related to laptops Toshiba, right?

  Can you please tell us where you live and which is your local ASP?

• Fan at high speed after upgrade to 1.4 (7 c) 1.5 (1f)

  Hello

  After the 1.4 Firmware Update (7 c) 1.5 (1f) through HUU on my two C220M3 the fan speed is higher than before (8500 - 9000 RPM).

  Is this normal?

  the servers are very loud.

  Best regards

  Nico

  Hello Nico,

  Yes, it's normal version 1.5.1f as we have increased the speed of the FAN to work around the known issues.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCue68150

  The next major version of the firmware will host additional logic that bring down the speed of the FAN.

  HTH

  Padma

• (Redirected) Aurora R4 CPU Fan problem (command center)?

  My R4 for over a year (so the warranty is released). Just before warranty missed, fans began to everything going haywire. I contacted support and they have updated my BIOS and uninstalled/re-installed my remote control center. Which fixed most of the fans. Then I updated to windows 10, and everything was still fine. A month later, I had a system crash (wouldn't start upward) and took the PC to a local technician who found little bad ram was the only problem. Unfortunately, he drove my drivers back to before the bios and the command center have been updated (I don't know why). So, fans again started going crazy. I've updated the BIOS myself and that fixed some of the fans, however, the CPU fan is always crazy. If I run a program more complex than playing a video file, the CPU/system fan goes up to maximum speed (> 5000 RPM). In the control of the temperature, all times are stable around 27 to 28, so I don't know why the fan is too reactive. Also, I don't know why it lists the 0 system fan and the cpu fan at high speed, I've mentioned. Looking inside the machine, I can see that each fan is on, so no fan should be set to 0.

  I've heard talk of uninstall command center and reinstalling it would help, but I was not able to repeat myself that I can't find the dell control center download more. In the page drivers Aurora R4, it isn't appearing any more for download and I don't want to delete it until I have a way to download again. My command center is listed as 3.6.5.0. I have no way of knowing if this is the last version, I can't find any control center files or current information on alienware.com or dell.com anywhere. I doubt replacing the command center will solve the problem, but it is frustrating that I can't even try. Heck, even the link to the support site for "Alienware drivers and applications" leads to a dead link now (a page that won't load). If this expensive platform becomes a brick after all just a year, I don't see myself ever buy (or sell) products dell again.

  My system is an Aurora R4 with Intel (r) Core i7 - 4820 K Pro. Running on windows 10.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Tecra Z40-A-176 - how to get support for high speed Port Replicator III?

  Hello

  a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

  What I found was the support for laptops page itself, but not for the port replicator.

  With regard to:
  Klaus

  I want to have the support so.

  What do you mean by support and what is the problem with the display port?

  If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

• Tecra S11 - fan high speed

  Hi guys,.

  I need help on a question that really puzzle me.

  After I tried to do a bios update to the last version (February, 2012), in windows 7, I got an error message stating that I didn't have permission to do the update. Since then, the fan starts to run at high speed, as soon as I start the computer, just after the display of the logo.

  Since then I updated the bios by using the procedure in back, but the problem persists. It behaves as a flight entirely large capacity server regards fan noise.

  How can I fix it and fix it?
  Thank you.

  You have a fingerprint reader software preinstalled on this laptop?
  Please check

  The old fingerprint reader software caused a few problems like intermittent hang up or freeze your machine (possible high rotation FAN), as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  This software update or uninstall the system you don t use it.

• I have 4 GB of RAM, but when my i play any game, my CPU fan runs at high speed and my system gets shut down within minutes.

  I have 4 GB of RAM, but when my i play any game for example NFS most wanted, my CPU fan runs at high speed and my system gets shut down within minutes. Help me solve this problem

  If you overclocked?  If so, cancel that.  If the games you play are poorly written, it is not that you can do about it.  If you have not cleaned the dust and lint from your computer within a certain time, you should do that because it accumulates and causes overheating.  For desktop computers, remove the cover and carefully use compressed gas to blow off the dust, especially around the fins in the processor heat sink and air ducts.  For a laptop, I'll ring gas compressed through the ventilation openings.

  Good luck.

• Tecra A9 - after CPU fan upgrade works constantly at full power

  Hi all

  I have 3 Tecra A9 notebook that came with a Core2Duo T7100 clocked at 1.8 Ghz with 2 MB of Cache. Updated every 3 to a T7700 clocked at 2.4 Ghz with 4 MB of Cache. According to Intel, these two processors TDP is 35W. Books don't get really hot and not hot. The CPU FAN starts right full power after the display of the BIOS with the Toshiba Logo screen. Under Bios Version 2.1 on all 3 systems, having the same behavior on all 3 systems. CPU properly recognized under Windows XP, Win7, and Win10. Is it possible to get the adjusted to normal CPU fan? The system isn t is hotter than upgrading the CPU, just for some reason any BIOS has now decided the fan must operate at full power. I even traded one of the CPU Fans with that of a Tecra A10 notebook but had the same effect as with the original fan. Having no idea what I could do. I hope for your help!

  Best regards
  Bornchiller

  I think that needs calibration to be performed to configure the table of fan speed.
  Toshiba Service Center to do this.

• S50 satellite - B 15 P - Fans running at high speed and system crash

  Hello

  I have a new SATELLITE S50 - B 15, i7-5500U, 8 GB Ram, SSD etc., IV and v have some problems with it.

  for unknown reasons the CPU fan starts to operate at high speed, even if the temperature of the CPU hit is not 35%.
  It also froze about 10 times since I got it (April this year).

  The only way to make it work again would be me to hold the power button down until stop and start it back up.
  Once launched upward there is no mention of potential problems in the newspapers of events other than the forced closure.

  I just wanted to know if anyone else has experienced problems?

  Thank you

  Chris

  The only way to make it work again would be me to hold the power button down until stop and start it back up.

  Forcing order restores the fan activity and performance?
  Hmm it sounds like there must be some sort of system emits probably the bottom of some process locks the CPU and therefore increases the activity of the fan.

  You could start the the Task Manager and in the process tab, you will find all background applications that would appeal to the CPU.
  Click the CPU column to display all the processes of loading the CPU.

  However, you can also try to change the option of cooling method that is available in Windows Advanced Power options.
  Go to control panel → power options.
  Click here on the power plan that is currently in use.
  Then click on advanced power options and access the cooling method.
  Here you can change it from active to passive.

  

  In addition, you can decrease the status of CPU max at 90-05%

  

• How downgrade the BIOS on Tecra S11 - boring CPU

  I have a BIOS that is "solve" the problem of high pitched noise high on the i5 CPU.
  But I have the latest version of the BIOS and since then I can not downgrade to the older BIOS which allows to "solve" the problem.

  * My question is how do I get the BIOS? *
  Because I send my Toshiba to RMA more because they will not fix it!

  My Tecra S11 went to RMA 2 × and 2 different authorized Toshiba service approximately 1 month partner. None of them repaired my laptop! More annoying is that the Hungarian services are absolute useless! I have a 2 year problem, with the high pitched noise high CPU.

  They have not replaced the defective processor, they replaced the motherboard! for no reason. OMG!
  Be very careful when you buy PC Toshiba laptop in Hungary and is not due to lack of the Toshiba but authorized service partners!

  Please, Toshiba do something!

  Hello

  Why do you think that CPU must be replaced?
  I guess that the technicians ran some diagnostic tests which can detect defective parts, I guess the CPU was not affected, but the real question was the motherboard (because it was replaced).

  However, what s your problem exactly?
  Why you want to downgrade the BIOS?

• Tecra S11 - 11 H - stop with the fan turns

  Tecra S11 - 11 H stops - seems ok, but when the screen is off, after 3 seconds, CPU-fan begins to operate.
  Pressing the power button / stop a few seconds turns off the machine and shut the fan.

  Support put me to upgrade to the latest version of the prints digital-device driver, but I found the software, no drivers.

  They also told me to upgrade the bios to the latest version.

  Problem is that this update of the bios will not start. He complains about power cord power supply not connected or battery power is low.
  The two isn't true - power cord is plugged in and the battery is fully charged.

  What could I do?

  TIA

  LGKF

  Hi lgkf,.

  Yes, I think the support from Toshiba is just because I found this article on the Toshiba page:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  As you can see, update the fingerprint software can help you get rid of this problem, then you must update the software of fingerprint. The pilot is a part of the software, then download the package for fingerprints on the Web from Toshiba site.

  Uninstall the older version, reboot and install the downloaded version.

  Check this box!

• Fans always operate at high speed after power failure

  HP Pavilion Slimline S5780T - Windows 7 Home Premium 64-bit

  After a power failure a night or more recent, our Pavilion Slimline case fan and CPU fan have both run at high speed all the time, starting from the system. The level of noise is intolerable.

  I opened and cleaned all the dust from the inside of the case, including the removal of the heatsink from the CPU. Everything is clean.

  I ran the following HP Vision diagnostic, test the system, including fans. During the test of fan, the fans ran at 100%, then fell to the former level normal, quiet, then ramp back up to 100%. So says HP fans diagnostic tests are OK when there is always a problem. And it is possible for them to run at slow, normal speed.

  I installed the free SpeedFan utility, but there is not place to adjust the fan speed manually.

  How can I find the problem and the fans run at normal speed, as they did before the power failure? Everything that controls the speed of the CPU fan and the fan is broken.

  Thank you and best regards,

  Stephen - Myrtle Beach, SC

  Strange things happen when power flucuations or failures occur.  Most probably the motherboard has been damaged by the PPE and that is normally not as repairable by a DIY.  If you could find a newer BIOS, that to solve the problem.  Since there can be no more recent BIOS, try to remove the battery from the motherboard for the night and then put the file in and reset the BIOS to see if that helps the default value.  Otherwise, it might be repairable.