Tecra S11 touchpad hardware replacement

Similar Questions

• Tecra S11-128 - hardware replacement

  Hi all,

  I'm sorry for my English not good.

  I have a problem: my Tecra S11-128 pc is dead.

  When the power is connected, the power led is light. When I press the power button, there is no answer. Nothing. Dead.

  I tried to get it repaired in a technical centre, but they said that they cannot fix it.

  On eBay, I found this motherboard: http://www.ebay.de/itm/Toshiba-Tecra-S11-168-Motherboard-Mainboard-fuer-i5-/141290303681?ssPageName=ADME:X:RTQ: A: 1123

  But the description says "Tecra S11-168",

  Is it possible to change the my Tecra S11-128 with the Tecra S11-168? Are they compatible?

  Thank you.

  It seems that two laptop computers Tecra are the same. In other words, they have the same part number (PTSE3E), so I think you can buy it.

• Tecra S11 - replacement after HARD drive I can't update BIOS

  My HDD in Tecra S11 is dead, and I bought a new SSD.
  Everything works OK, but I can't update the BIOS again. Update utility displays an error:

  Error: Preparation of updated failed.
  You have not given permission to run the update.

  What should do? Help, please.

  > Error: Preparation of updated failed.
  > You have not given permission to run the update.

  You have administrator rights?
  Looks like the issue may be related to missing privileges that are necessary for the execution of an update.

  You can enable the administrator account, follow these steps:
  Choose command line (cmd the black box)
  In the box type net user administrator / Active: Yes
  And then disconnect. Usually, an additional user account should be visible administrator.

  Now, log in using that account and try to run the BIOS update.

  Note: in many cases the VAP (value added package) is required to run the BIOS update.
  Remember also, that the package was decompressed properly before you run the exe file.

• Tecra S11 - 11G - external monitor flickers when the Wifi is enabled

  I have a similar problem on my brand new Tecra S11 - 11G. The only difference is that the problem is present only when I have my laptop plugged in and turned on WiFi radio.

  If I turn the Wifi radio off and keep the laptop connected to the power source, the external screen keeps flickering. If I keep the WiFi radio and disconnect it from the power source blinking stops, too.

  I reported this problem to Toshiba customer to the Portugal (where I bought it) and they gave me the ticket case #710008193. They said that they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new. A customer still expects to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft. In addition, this laptop is part of a fleet of the company who buys only Toshiba laptops and we are talking about a Tecra and not a Satellite. We deserve more respect from Toshiba.

  In a year or two, I have a new laptop (company policy) and it surely won't be a Toshiba.

  > They said they would not replace the defective unit and that I should leave for repair. It is absolutely amazing because the laptop is brand new

  That is why amazing? A hardware malfunction can still happen and this happens not only in the world of the computer/laptop. Therefore, manufacturers provide a service to a client and failure may be fixed and covered by the warranty.

  > A customer still waiting to have a well work product when needed out of the box without having to call the repair man. I think it is their obligation to replace the damaged aircraft

  Of course you are right, but in the reality of things happening.
  My PS3 died after a short period of time. It has been fixed and replaced under warranty conditions, but this isn't a reason for me to say; I would not buy PS3 more because of this problem.
  My BMW had some engine problems, that it was fixed under warranty and I would buy this car again once because this car is great and I think other builders are no better, and I think this would also happen to other manufacturers

  That s my personal opinion in the opinion

  Greetings

• New installation Tecra S11

  Hello

  I am a builder of network and system, so I think I know what I do... well maybe one of you could help me solve this problem
  I'f contacted Toshiba Netherlands but just don't know what to do... then you are my last hope ;)

  History:

  I'f purchased a new Tecra S11 came with BIOS version 1.6 (very old I think)
  removed the original HARD drive and used an SSD instead.
  Installed a fresh WIndows 7 Profecional and tried to get everythink...

  Fist now first I was unable to update the bios to version 1.7/2.0/2.2 (latest)

  Toshiba Netherlands told me that I needed to use the default value provided to Toshiba picture
  and as Toshiba didn't support BIOS update on non-preinstalled-OS... (which is really weird in my opinion!)

  So I replaced my SSD with HDD original (with the original Image) and updating the bios... today to version 2.20 (last)

  Now when I install my SSD with my own Windows 7 installation (installation non-Toshiba) I cannot install m any
  utility provided Toshiba...
  For example, utilities Eco said after launching the setup "Not supported BIOS"
  I ve installed tools all THE Toshiba and patches which ware tinien... but half isn't!

  bottom line, is there a way to "force" the ECO and all other utilities that do not work in a NON-Toshiba installation?

  Any help would be appreciated! I just can t believe / unless there's now way to get a fresh windows install the right way to work
  with all Toshiba Utils!

  Thank you in advance,

  Jacob

  In General, all the stuff you can find on the Toshiba download page are the same integrated in the Toshiba recovery image.
  To be honest I don't understand you at all.

  If your laptop comes with Win7 you can install this image on your new SDS. Recovery image contains Toshiba drivers all important patches and the Toshiba-specific tools and utilities, using this recovery image that you have perfect configured operating hardware and software.

  Therefore, I see a problem only - additional software from Toshiba. No you don't have to use all of it. All you n t need simply to remove from the system. You can delete all you want, but you will still work with OS. After doing this install your favorite software.
  Recovery image Toshiba is ideal for creating a pre-installed OS perfect and optimized according to your own needs.

  To be honest I do the same thing all the time. Believe me to remove the software usually I need any time but at least have exactly what I want.

• Tecra M2, Touchpad / dual pointing devices does not...

  Hello
  I'm having a problem with my pointing devices. Both touchpad and battery Point ceases work sometimes for no apparent reason, then him come on again once. I tried to reisntall drivers but not help. I have to use the USB mouse now to for use. Everything seems fine and the system gives no error or so. Says the device works very well. Have used the wizard by default as well, but he just does'nt work. No errors etc...
  Please help me to solve the problem...
  Also another question, is Tecra M2 visa compatible. I have 1.5 G of RAM and 2.0 Ghz processor
  concerning

  Hello

  I noticed a few intermissions of touchpad on my laptop while the CPU runs at 100% with a maximum return.
  Maybe this could be a reason for interruptions of unique touchpad.

  In other cases, the touchpad hardware malfunction perhaps. One of my friends noticed a very strange behavior of touchpad on his notebook.
  The touchpad has run out of control and the courier jumped from one side to the other.

  In this case the equipment must be checked and replaced if necessary.

• Tecra S11 - broken LCD

  Good afternoon

  I have a toshiba tecra s11-128 with broken LCD screen.
  This model has an LCD with a resolution of 1366 * 768.

  The same series (example: S11 - 11 d) was also equipped with the LCD HD + (1600 * 900)

  I can replace it with HD + LCD screen (resolution of 1600 * 900)?

  Thanks for any response.

  You are right. both models have different LCD displays but the same graphics card. I can't say for sure, but I'm sure you can use the HD screen + with your laptop.

• How downgrade the BIOS on Tecra S11 - boring CPU

  I have a BIOS that is "solve" the problem of high pitched noise high on the i5 CPU.
  But I have the latest version of the BIOS and since then I can not downgrade to the older BIOS which allows to "solve" the problem.

  * My question is how do I get the BIOS? *
  Because I send my Toshiba to RMA more because they will not fix it!

  My Tecra S11 went to RMA 2 × and 2 different authorized Toshiba service approximately 1 month partner. None of them repaired my laptop! More annoying is that the Hungarian services are absolute useless! I have a 2 year problem, with the high pitched noise high CPU.

  They have not replaced the defective processor, they replaced the motherboard! for no reason. OMG!
  Be very careful when you buy PC Toshiba laptop in Hungary and is not due to lack of the Toshiba but authorized service partners!

  Please, Toshiba do something!

  Hello

  Why do you think that CPU must be replaced?
  I guess that the technicians ran some diagnostic tests which can detect defective parts, I guess the CPU was not affected, but the real question was the motherboard (because it was replaced).

  However, what s your problem exactly?
  Why you want to downgrade the BIOS?

• SATA on Tecra S11 speed

  Hello

  I'm looking for a tecra S11 sata connection speed.
  I want to replace my ssd for the greater and I was wondering if I could win something when I buy a sata-600 drive instead of the sata-300 that I use at the moment.
  I use an OCZ vertex II now (120 GB)
  I would go for the OCZ vertex 3 (256 GB), but this one has connection sata-600.

  will this work? and the sata-600 enjoy my system?

  Kind regards

  Luke

  > I would go for the OCZ vertex 3 (256 GB), but this one has connection sata-600

  SATA 600 means SATA III standard that support the theoretical 600 Mbps transfer speed

  SATA III is backward compatible with SATA I and II.
  So you can use the SSD 600 MB/s (SATA revision 3.0) in connection with SATA I and SATA II. But of course, the speed would be limited to these standards.

  AFAIK the Tecra S11 supports SATA 2.5 Rev (gen 2) which means that it is SATA II limited to 300 MB/s

• Tecra S11 - 11G - adapter not detected (3G) Mobile Broadband

  Good afternoon

  I wanted to use the modem 3G (ericsson F3607gw), but my windows does not detect the device.
  I ran a ubuntu LiveCD and it does not detect the hardware as well.

  I have a colleague who has the same laptop and the presented material on Device Manager.

  I don't have any equipment not identified on my device manager.

  The laptop is: Tecra S11 - 11G.

  Help, please.
  Thank you.

  Hello

  I assume that the driver of the 3G is missing.
  3G driver is located here in the download area of 3G:
  http://APS.toshiba-tro.de/WLAN/

• How to change sound on Tecra S11?

  The sound sounds aweful! Which speakers could buy and replace in my Toshiba Tecra S11?

  To be honest I m really surprised by your question. Always is that laptop Tecra are designed for commercial and designed for use in offices, meeting rooms and the customer visit so the sound is not so important in the whole of the package. This is not portable multimedia, so you probably won't find any Tecra with high quality speakers inside.

  OK, I can understand you and maybe it's not a bad idea to have Perfect sound on this model of laptop, but I think this is the wrong place for your question. What you need is professional advice.

  I recommend you contact the nearest authorized maintainer and ask for help. They have service manuals and know what speakers are inside and what speakers can be integrated as a replacement. Maybe some high quality of harman/kardon speakers can be used for the upgrade, but that one is not easy to say.

  If you do upgrade successfully please let us know and share all information with us.

• Dysfunction of SoftKey on Tecra S11

  Hello

  I'm having a problem in my Tecra S11, shortened keyboard Fn + F5 to navigate between screens does not, but it worked yesterday and I wouldn't change a thing on my laptop since... I noticed that Fn + F1 is blocking my computer so I think this isn't a hardware problem...

  I tried to install driver for shortcut keyboard and utility display changing the Toshiba website, but still not good...

  Any suggestions?

  Thank you

  P.S. I'm using windows 7 x 64

  Try to reinstall the Toshiba Value added package.

• Tecra S11 - 140 - HARD disk Protection works only with windows 10

  After a clean install of windows 10 in my laptop S11-160, Device Manager does not recognize HARD drive Protection sensor, so in the HARD disk Protection settings, this option cannot be enabled. Is it possible to fix it, or I come to windows 7 and then move to 10?

  Another problem is that when I try to burn a dvd or a cd, I get an error: "write speed is too fast or too slow. The reader, MATT * A DVD-RAM UJ890AS, worked perfectly on windows system 7.

  Any help would be appreciated!

  After you install clear 10 Windows in my laptop TECRA S11-160, Device Manager found no sensor HARD drive protection, so within the parameters of this protection cannot be enabled. What I have to go back to windows 7 and upgrade to Win 10, or is there another solution?

• Defective Tecra S11 - need new notebook with Express-Card-Slot

  My TECRA S11 166 is defective.

  I need a new Notebook with * Express-Card-Slot * and (if possible) RS232.
  What type of laptop comes with an Express Card Slot?

  Hello

  Ago different Toshiba computers laptops on the market and Toshiba release new models at very short intervals.
  I recommend you visit the page of the Toshiba laptop computer product and to compare the models and series available.
  Computers Tecra laptops offer a professional use and Portege series is best in mobile computing.
  The series of satellites is machines of entertainment designed to provide exceptional all-round performance.

  http://www.Toshiba.EU/laptops/

• Tecra S11 with BIOS 3.50 - USB mouse is not recognized at startup

  Hello

  I installed the latest version of the BIOS in my TECRA S11 - U10, and now my "HID" device does not-that is to say my dongled USB wireless mouse. I must now remove the dongle and re - insert before the TECRA sees the mouse.
  Boring, just about usable, but it's a PITA and I'm aware of always 'making/breaking' the USB connection.

  Must be something to do with the BIOS and see devices HID on "start"?
  Finally, I enabled Legacy USB in the BIOS device support, but still no joy. In addition, have tested the mouse on other laptops - works well at the start, so NOT the mouse.

  Suggestions, people? Thank you...

  Hello

  Disconnect your USB mouse and go to Device Manager.
  Remove all USB hubs and USB controllers in Device Manager list.
  Reboot the laptop.
  Wait until all the USB ports have recognised and installed again.
  Then connect the USB mouse and check how it works.

  You should also test different USB ports available on this laptop.