Tecra S11 - what are the two primary partitions for?

Similar Questions

• Satellite A660-k17: can I remove the two primary partitions used for restoration?

  Hello
  I have 3 questions :) #.

  1. I burned a copy dvd recovery media, on a laptop A660 k17. There are two partitions on the disk that I think are there for the recovery. The first is 1.46 GB and it's for the recovery and another partition hidden 8.29 GB... and I think that the first contains the Recovery Wizard and the whole environment in which we will get through the repair of the system and the hidden disk contains the actuall with windows data, drivers and so on. Can I remove these two? I ask mainly on the first, if it is not necessary for the system to boot or something after that I have to recover the laptop to the factory setting.

  2 and I also want to leave my partitions so that I don't have to partition the whole drive from C 600 GB again. I have a D drive created but there is this response to a topic already in the forum http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=64754&tstart=90
  who says that when I leave the partitions I created myself, that the recovery will be not available. I have a copy on dvd, but only to make sure no kidding something upward.

  3. when I want a clean system without some software which are preloaded on the oem recovery disk... I have to use windows recovery? or it will be the same as the toshiba one?
  Thanks for the reply possible :)
  Beautiful day :)

  > Can I remove the two primary partitions used for restoration?
  First not, but you can remove the Toshiba recovery partition if you created the recovery DVDs. One day, if you want to install the recovery image once again you can use created the recovery disc.

• What are the two icons to the left of the indicator in the mac mail (arrows and circle)?

  What are the two icons next to the flag in the mail from mac (arrows and circle)?

  I can't understand what they're doing. Thanks for any help!

  If you are referring to the registration of the preview, the arrows appear when you Replied (curved) or transferred (right arrow) by e-mail.

  The circle, when rempli filled in blue, indicates you have not yet opened / read the email.

• What are the size of partition recommended for installing Windows 7 Professional 64-bit?

  What are the size of partition recommended for installing Windows 7 Professional 64-bit? I have a 2 TB internal hard drive and want to install Windows and Norton Internet Security on the drive C, drive D and drive E data programs.

  Thanks for a response.

  Brenda

  Original title: size partition Windows 7 Professional 64 bit

  For technical purposes, I recommend you only keep utilities all programs that you install on the startup disk. This is recommended if you plan to upgrade to future releases of Windows such as Windows 8 because you will experience problems with the installation program.

  I recommend however, you can keep accumulated data such as Documents, Photos, music, videos on a separate partition to ensure custody.

  The recommended size for the boot drive around things like Windows, future growth for applications and the Windows updates and program updates will be considered.

  So I recommend not more than 200 GB, for a lot of space, I would shoot up to 300 if you want to keep things like System Restore Points.

• Certification valid VCP6 VTC. What are the prerequisites to go for VCP6 CMA?

  Certification valid VCP6 VTC. What are the prerequisites to go for VCP6 CMA?

  If I wish to go for VCP6-CMA, do I go training and Certification, then drive to the VCP6 Foundation, if I am the owner of VCP6-VTC valid?

  TIA.

  Rgds.

  No, you ' don't. If you have a valid secure Channel, you can take any other examination VCP or VCAP without taking a training course. For more information, see: VCP6-CMA Certification

• What are the vulnerabilities of security for Adobe Cloud?

  What are the vulnerabilities of security for Adobe Cloud?

  
  

  Thomas 85719935

  Please visit: CC help | Creative cloud / Common Questions

• What are the best export settings for a first Pro CS4 video HD?

  Hello!

  I had so much trouble with this issue and that's something that continually frustrates my boss. I have a HD video what are the settings for it

  23.98 FPS

  1920 x 1080, then a few lines down he says 1408 x 792

  16-bit,

  2 channels

  48000 Hz

  What should be the parameters when I do a new sequence?

  When I look into the window in Premiere Pro I constantly have to "shrink" the image to fit the window, is that something I should do or he says that the configuration of the sequence is bad?

  But more importantly what should be the parameters of export? I exported a long video of 4 minutes and the size was 1 GB, I know that it's too big.

  I need to export without losing quality and export another one which is consistent with the limits on the size of Youtube and Vimeo.

  Vimeo is 500 MB per week, sometimes I download 4 videos per week. I think that Youtube, you can download 500 MB at a time.

  I need to get the smaller size with lose the least possible quality AND the best export quality settings, so I suppose I have 3 separate issues.

  What are the best settings of sequence for HD video?

  What are the best export settings for HD without losing quality?

  What are the best export settings for the size of out about 500 MB with losing the least possible quality?

  Thank you!

  http://forums.Adobe.com/thread/713070

  On the thread that above, I used the 5th anwer, and it will take about 7 hours to export a 4 minute video :/

  All your questions are answered here.

  http://forums.Adobe.com/community/premiere/faq_list?view=discussions

• What are the advantage and disadvantage for Standy physical and logical standby

  Hello
  
  What are the advantage and disadvantage for Standy physical and logical standby configuration?
  
  Thank you
  Ken

  Just to add the open text of Vihang Astik that for physical standby, with 11g you can now have the database read write (new features).

• What are the advantages and disadvantages for the largest block size and

  What are the advantages and disadvantages for the largest and the smallest block size block size?

  Smaller size of block

  Benefits
  Relatively large GoodHas air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block, for small lines with a lot of chance of chaining
  access.
  Reduced block contention.
  Disadvantages
  A relatively large air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block of chaining.

  Larger size of block

  Benefits
  Lower overhead, so there is more
  room to store the data.
  Allowed to read a number of lines in
  the buffer with a single I/o cache
  (according to the size of line and block size).
  Good for very large or sequential access
  lines (for example, LOB data).
  Disadvantages
  Waste of space in the buffer cache, if you
  random access to small lines and have a large block
  size. For example, with a size of 8 KB block and 50
  size byte of the line, you will lose 7 950 bytes in the buffer
  When you make a random access cache.
  Not good for the index used in an OLTP blocks
  environment, as they increase the claim to block
  on the leaves of index blocks.

• What are the minimum services required for a windows7 home premium system runs completely independent

  My better half is not in computer science and has no desire to become. I have too many movies and want to set up my HTPC as a giant DVD player only. I load movies and play movies.

  What are the absolute minimum services required for windows 7 to run (and stop telling me that's not authentic) to run the 2 tasks only Media player and an extraction program and absolutely positively nothing else
  no firewall, antivirus, network, internet, encryption, indexing, etc... required.

  Thank you

  Hello

  See this link that shows how to turn off services in Windows 7.

  http://www.SevenForums.com/tutorials/2495-services-start-disable.html

  http://www.techknowl.com/2009/03/disable-unwanted-services-and-speed-up.html

  It will be useful.

• What are the requirements of system for Photoshop Elements 10?

  What are the system requirements for Photoshop elements 10

  http://helpx.Adobe.com/x-productkb/policy-pricing/system-requirements-Photoshop-elements.h tml

• What are the other 4 CD for?

  I install Photoshop Elements. I know I have to start with disk 1, but what are the other 4 for?

  Install the first Elements, Photoshop Elements

  Mylenium

• What are the minimum system requirements for firefox 5 forMac OS x

  When you published Firefox 4, it updated automatically on my Mac PowerPC osx 10.5.x and then would not be executed. I had to look for an earlier version, download and reinstall. It was awkward. I can't find min sys req for the new 5.0 version. Min sys requirements should be obvious in yor press. What is the minimum configuration required for firefox 5.0 for Mac osx, and with more frequent updates, how will I know when you have 'obsolete' another one of my machines, and how would I be protected to an update too far?

  Firefox 4 and 5 will not run on a Mac PPC; only on Intel. You can get the TenFourFox, which runs on a PPC.

  http://www.floodgap.com/software/tenfourfox/

• What are the minimum services required for booting to W7?

  I'm trying to get a list of the minimum services required for W7 starting, i.e. which must have the 'Automatic' property.  I guess that those who have the property of "Delayed start" starts when required after the start, right?

  Capnmike

  There is a 3rd party site with all this information called blackviper.com.

• What are the two tiny metal pins on the left side of the phone for?

  They are for attaching a tripod - or what? See the diagram below for the location:

  

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  They are used for loading. You can load using these pins and our docking station: http://www.sonymobile.com/global-en/products/accessories/magnetic-charging-dock-dk48/