Tecra S2 cannot switch to the external display

With my Tecra S2 and when it is docked in the Port Replicator APR - III, I used to be able to connect my external (via DVI) display so that it was to automatically screen output to we by default, not only to the windows startup screen (Yes, I noticed the topic on the forum at the start of windows) but also when display login screen and beyond.

Only problem now is that there is no more than anything, she now only sends the output to the external display when starting and then switches back to the computer screen displaying the screen Windows login and when you are connected to Windows.
Also after commissioning and connection, FN + F5 does not at all, even when you switch to DVI, display does not illuminate.

I feel that either the nVidia properties settings (double screen, unique, etc.) or the Mobile Extension Manager have something to do with it.
Anyone who knows the answer / solution to this problem?
Experts on the Mobile Extension Manager or several monitor in nVidia settings with of Toshiba Tecra?

Thank you

Arjen

Hello

Well, as I know it is not possible to set the external monitor as a default monitor.
I use a Satellite phone and sometimes I plug it into the external monitor and use the extended desktop option.
During notebook startup procedure the windows boot image will appear on the second screen, but the user name and the operating system appears on the screen of the laptop.
I think you can use the external monitor but you can't set it as a default monitor and you can use it if the operating system has been released.

Tags: Toshiba

Similar Questions

  • Does not work on Tecra A2 - FN or key how to switch to the external display?

    Hello

    Tomorrow (Saturday 6) I have to show a little presentation my Tecra A2 on an external display or projector.
    After that I have to install my laptop for the second time last month, the Fn or function keys do not work.
    With this problem I don't know how to work with the external display.

    Please can you advice?
    Sorry for my English at low altitude.

    Buist huh
    The Netherlands

    @J.Verberk
    Sounds you're a newbie and you're talking nonsence
    You comment is simply not qualified.

    @Hein
    You said that you have installed you mobile again. Did you use the Tosh recovery CD?
    If this isn't the case, I think this might be a reason for the FN key anomaly.
    After recovery use the laptop must switch with FN + F5 external peripheral connected to the laptop.
    If you use try beamer to turn the trap settings.

  • Portege R700 with docking station may not automatically switch to the external display

    Hello!

    In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

    Now we have a little problem with the new R700 model: PT318C - 00G 001,
    We bought 30 of them.

    WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
    It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
    It's really not easy to use for our users...

    With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

    We are on Windows XP Pro SP3.

    I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

    Thanks for your help.

    Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
    Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

    Also try a BIOS update (v1.70 is the last one I think).

  • Tecra S4: cannot switch automatically to an external monitor with APR 3 +.

    Hello

    I used a Tecra S4 (with Windows XP Prof.) with monitor 3 + and with an external 19 "Advanced Port Replicator. If I connect my laptop with the Port Replicator, it will automatically switch to the external display. I have to use the function "FN" to move."

    I signed up the external monitor with "use this device as the primary monitor.
    I don't have this problem with my other laptop Toshiba Tecra A3.

    Now, I think the problem is the geforce graphics card.

    Does anyone have the same problem?
    Thanks for the help and sorry for my bad English; (o)

    Hello

    It works with Tecra S4, too.

    Install new Modules of Commopn
    http://support.toshiba-tro.de/Tedd-files2/0/CMOD-en-20071119111948.zip

    Install the latest Toshiba laptop Extensions
    http://support.toshiba-tro.de/tools/Tecra/TS4/XP/TME/TME-TS4-XP-38400xp-en.zip

    Install the display device change Utility
    http://support.toshiba-tro.de/tools/Tecra/TS4/XP/DPL-change-drv/dspdevchge-TS4-XP-2500-en.zip

    Enter in Control Panel, start Extension mobile controls.
    Go to the tab 'Change of display device' and activate the Service.

    Now, it should work.

  • Switching the external display to MBP screen retina, poor quality, need to restart FF19.0.2

    Here is the chronology of the events:

    (1) FF start on my MBP (OS 10.8.2) and the retina display working properly.

    (2) connect my MBP to a 24 "external display which has a resolution of 1920 x 1200 (defined as primary) max. FF displays well on screen.

    (3) disconnect the external display and FF is now pixel on retina MBP. Updating of system preferences Dispay doesn't seem to help, or I have not found the magic technique.

    (4) restart FF and everything is fine.

    The question seems so FF not to recognize the need to revisit the resolution of the retina.

    You are welcome

  • Portege Z30 - A - 18 M - cannot set the native resolution on the external display

    Hello

    I tried to connect two different displays full HD to my Portege Z30 - A - 18 M and I was unable to set the native resolution - maximum resolution I can put for those is 1680 x 1050... I was not so surprised by the first that I had a few problems with a native resolution when I connect to the laptop computer Satellite I had before. But then the same thing happened when I tried the other view.

    I thought that this notebook can handle a higher resolution external... Is there a way to force the native resolution of the external display in Windows 7?
    Thank you!

    Just a question: have you plugged your Portege with HDMI cable and use only the HDMI option?
    With other words went from the desktop to the external display only computer?

    I don't have this machine, but I think you should be able to see the desktop on an external device to the HD full 1920 x 1080 resolution.

  • Tecra A10 - 1LL - connection with the external monitor

    Hello

    I have a problem with my laptop Tecra A10.

    When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

    My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

    Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

    Hi SilverWizard,

    What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

    As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    It's working now?

  • Satellite M50-130: no display after the passage of the external display in main monitor

    I have a very strange problem.
    My brother was on his user space as soon as possible and I managed to get the secondary monitor for main monitor and disable the screen of the laptop back, however, when it comes to me, it won't happen...

    Well, any help would be appreiciated.

    Hello

    Could you please be clearer? Is it possible to see something on the external monitor?
    Do you see something? What happens if you use the function FN + F5 device display?

    I put t know how you managed to set the external display as main screen because on my laptop, this option is grayed out.
    However, you should see the laptop if you will start Notepad in safe mode. Please check!

  • HP Split: Port HP Split HTMI spoiled, any other way to connect to the external display

    HTMI HP Split connector seems weak and unable to detect the external display. Troubleshooted HTMI and HTMI port to the monitor cable to be ok. May need another way to connect to the screen, otherwise repair port (don't know not so easy to fix). Enjoy the century lights.

    2 way possible. There is such a thing as a usb adapter to HDMI.

    http://www.Amazon.com/cable-matters-SuperSpeed-adapter-2560x1440/DP/B00BPEV1XK/ref=sr_1_2?ie=UTF8&QID=1428145993&SR=8-2&keywords=USB+to+HDMI

    USB 3.0 models provide a very good experience. Also if your laptop has the right hardware (Intel processor and wifi card, usually) you can use WiDi (Wireless Display), but unless you connect to a Smart TV with built-in WiDi you need a WiDi adapter.

    http://www.Amazon.com/NETGEAR-Push2TV-wireless-Miracast-certified/DP/B00904JILO/ref=sr_1_2?ie=UTF8&QID=1428146112&SR=8-2&keywords=WIDI+adapter

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Tecra A9-14 X - unable to use the native resolution on the external display

    Hello!

    I have some problems with my new monitor (resolution: 1920 x 1080)

    I use a Toshiba Tecra A9-14 X.

    I found this problem on the Suppor Intel home page: http://www.intel.com/support/graphics/sb/cs-028366.htm

    They have fixed this problem, but this isn't availlabe an update on Thosiba Support site...

    Ist it there another Solution?

    welcome them

    Chris

    Hello

    You can consult the page of the Toshiba driver for the latest updates.
    If there is not another version of the driver, then you must use the driver from the Intel page.

    I have a U400 and I plugged the external format 16:9 widescreen monitor too.
    I m using Intel page drivers and it works without problems.

  • Using the external display with Satellite A100-PSAA9

    I have a problem when I connect to an external monitor of 2ยบ, it connect but next it disconect, it's always the connection and disconecting. I did update the bios and the display driver, but I still have the same problem, what can I do?

    My operating system is windows vista.

    What do you exactly mean with disconnection and connection?
    The switch to internal and external display or the display on the external monitor will simply disabled.

    Have you checked the connection to the laptop computers monitor port?

  • System hangs on the external display connection

    I just bought a MacBook Pro 13 "mid 2012 version because I travel a lot." I do a lot of coding on my main PC. I didn't mind having a smaller screen and the retina no since I had to plug my monitor 27 "HD for the majority of my work. This is the problem...

    Two things happen when I try to connect it via Apple's Thunderbolt at the VGA connector. Or the other

    1. the external screen but the MBP 2012 (1200 x 800) native resolution and I can't change it at all

    or

    2. all of the gray system out and crashes and the second monitor turns off say there is no entry. Then I pressed the power button to turn off completely it.

    Nothing wrong with the display or the adapter I tested them both on another laptop that my wife and my main development office (two PCs). I guess that something is wrong with the MacBook or the underlying software. I'm running El Capitan and the MBP is maxed out in RAM and a 500 GB SSD. I tried a lot of things I've seen online already, but none of them worked. Is this what can I do to get the 2nd screen to work on its 1920 x 1080 resolution?

    Have you tried the PRAM reset?

    How to reset the NVRAM on your Mac - Apple Support

  • MacBook - problems to connect the external display w

    I do a lot of presentations (Keynote) to Mac external displays at events.

    The new MacBook (12 ") is quite often problems, so I have to carry a MacBookAir as back-up in case where.

    Problems can be no image at all, or two images (like 70% Keynote + 30% of office) and with spikes.

    It doesn't matter if I use HDMI or VGA. And Yes, I know how to set the resolution in the workplace sometimes that the problem is solved by adjusting the resolution manually, but then the Macbook can jump to the resolution which does not by itself during the slide show...

    I think that the problem only occurs when I have to go through a device such as a split, or when there is a lot of tech back stage.

    Anyone having problems of this kind with the MacBook?

    Any ideas on what is wrong and how to fix?

    Hello stefanfromingaro,

    The article link below a certain number of troubleshooting steps in details that can help stabilize the output video to your Mac when connected to external displays.

    Get help with graphical problems on external displays connected to your Mac.
    https://support.Apple.com/en-us/HT201177

    All my best.

  • Satellite M500 - closing LID off the external display

    I just bought a new M500 today. I use a TV 46 '' as external display. When I close the lid of the external screen turns off and the laptop into hibernation.
    How can I stop this I use the external screen 95% of the time?

    Thanks in advance.

    Hello

    It's just an option, you have to change the Windows power management. Go to power options, and then select the power profile you use. Change the map and scroll until the power buttons and lid-online lid close action. Change this option to do nothing. With apply then OK you save this settings.

    Now you can try it again. I must say for me that it worked because I also work with the external monitor. :)

    Welcome them

  • M200 & Multidock II the external display orientaion is upside in tablet mode

    With the Portege M200 and II Mutidock I wanted to log in and use an external monitor, so I could use the M200 to draw/write on Tablet mode everything glancing outside, but little matter I try in screen orientation, one of the screens is backwards is not usable.
    It's a feature announced, so I expect there's a way to guide the tablet screen a way while still getting the external monitor to display vertical position?
    Thank you

    Hello

    The resolution of this problem is actually very simple. Go to display properties. Then click on the last tab on the right, and then click Advanced. Change the settings for the "second monitor" to "extend my Windows desktop on this monitor. This should fix the problem of the display 2nd upside down. Have a great day.

Maybe you are looking for