Tecra S2 crash by activating dynamic CPU mode

I have problem with my Tecra S2.
My Tecra S2 is crash after a few second after login to the operating system if dynamic CPU frequency mode is enabled, but this problem does not occur if I set the frequency of the CPU always low.

I tried multiple operating systems, but this problem still happens. Im sure is not the software problem.

Anyone know how to solve my problem?

My last setup is
Proc intel centrino 1.6 Ghz
1024 DDR 400 memory
NVIDIA Geforce go 6600
HARD DRIVE 120 GB

If the machine crashes, freezes and blue screens occur then this could be connected to the memory defective barrette

I recommend to replace the memory modules and test with another

Tags: Toshiba

Similar Questions

  • In Illustrator CC GPU acceleration still works after disabling "GPU Preview" and activation "Preview CPU" (on a workstation gpu)?

    I use a workstation graphics card which allows the GPU acceleration in Illustrator CC.

    By selecting 'GPU Preview' instead of "CPU overview" under the "View" toolbar in Illustrator CC results in a rougher experience.

    Which brings me to wonder:

    1. In Illustrator CC GPU acceleration still works after disabling "GPU Preview" and activation "Preview CPU" (on a workstation gpu)?
    2. Acceleration for my gpu GPU actually improves the performance for my work?

    Nope. You must have sighted GPU in order to get the boost GPU.

    The Quadro K series is on the supported list, so it is strange that having the preview turned on GPU cause lag. It should be the opposite where the CPU preview is jerky.

  • AntiAlias manual when using CPU-Mode

    Hello

    When you switch CPU Mode (which is faster in my case) all right, except the scaling of the images very look bad.

    I am compiling with AIR 2.7 and I read somewhere that cpu mode has no AntiAlias value.

    Can I use another method / AntiAlias pixelmanipulation my images?

    Apparently the bitmap smoothing is turned off for Android. It still works in iOS. A work around is to do your own bitmapData.draw () to scale the image, and you can specify smoothing to be true.

  • Satellite 2410-303 crashes when the cache CPU 2 level has been activated

    I have Satellite 2410-303 Bios version 1.40 and when I activate CPU level 2 cache dose of laptop not working still hang.
    So now, I have only to activate CPU level 1 cache and turn off level 2 cache if the laptop run slowly.

    Hello

    Well, what to say, the level 2 cache is an external memory to the CPU.
    Maybe there is something wrong with the CPU? Who knows

    Have you tried to update the BIOS? Check if this is possible and if the newer BIOS version is available.
    Sorry, but I cannot suggest alternatives because to me, it looks like a hardware problem and in this case the ASP help is necessary.

    Best regards

  • [W510] crashes during use heavy CPU/GPU | possible overheating

    Hello

    I have a problem with W150 6 - week old I am just unable to provide. I tried a fairly recent game to test the hardware capabilities of my new camera. However, when running this game, it crashes at irregular intervals.

    MACHINE:

    ThinkPad W510, 4389-W1B Type

    Intel i7 Q70

    nVidia Quadro FX 880 M

    4 GB OF RAM

    Windows 7 Pro 64-bit

    SETTING:

    The game in question is 'Mass Effect' (2008) with graphics almost maxed out settings (720 p and maximum of details). The machine has all the latest drivers and BIOS installed.

    BEHAVIOR:

    The machine is appearently under a heavy load of CPU/GPU with the fan at the highest speed. The causes of the accident the screen go blank and feeding the machine in less than a second after a short hard disk activity. The time until the machine hangs when running the game differs between 3 to 30 minutes.

    COMMENTS:

    I installed the tools, namely TPFanControl and SpeedFan temperature monitoring. The CPU does not get like 80 degrees Celsius, the temperature of the GPU also doesn't exceed 80 degrees Celsius. The accident occurs only with this game of 3D acceleration. However, it is the most demanding game I posses. The question seems to be temperature related since it usually takes much more time to plant the device switching on after a long time being turned off, or in a cooler environment.

    SO FAR THE TESTS:

    I have run several tests of stress on the machine, namely of Prime95 (max CPU temperature: 86), FurMark (CPU: 85, GPU: 80 c) and 3DMark. All passed without accidents (when running for about 1,5 hour maximum). I got the latest nVidia drivers installed, as well as the latest graphics drivers approved by Lenovo. I tried other games with resolution 1080 p and maxed out settings, but the accident only with "Mass Effect".

    CONCLUSION DATE:

    Like many, I can tell, when you run the game, CPU or GPU become warmer than during the stress tests. Nevertheless, the problem "seems" related to temperature. The fact that I don't have to plant with any other game machine or a stress test makes me assume that Mass Effect is just wrong with Windows 7 or the material. However, to my knowledge, bad code or bad drivers do not cause such a crude system shutdown.

    Well, I really don't know what o think about it. I don't want to make use of Lenovo support, unless it is really an anomaly in the system. I would need to get along without my laptop for 2 weeks, which is a long time in view of the fact that it is my primary work machine.

    So my questions to the community are:

    1. is it possible that this is a temperature related problem after all? Despite the positive stress test?

    2 is it possible that these accidents are caused by bad drivers or bad programs?

    Tips are greatly appreciated...

    I don't think it's an overheating problem, it is more likely a software/driver problem or a hardware problem. I am inclined to think that it is the last.

    The system should go in a judgment of thermal overload until less than 95 degrees. 80 degrees is on the beach of normal operation for the GPU and the CPU temperature when loading at 100% load.

    Try to disable the Turbo mode, also have you tried to perform a test on the ram?

    In addition, update a bios may be a good idea if you don't have it already done.

  • Tecra M9 crashes when the apparatus or the lid close on Windows Vista Business

    Hello

    I have a Tecra M9 with Windows Vista business, and when I close the lid on the laptop that Windows puts on hold. When I open the lid, although wakes up the computer screen but it crashes.

    Even if I have the machine on the docking station when I disconnect the machine crashes.
    Any ideas? Any help much appreciated.

    Mike

    Hello

    I don't know what you mean in crashes, but I know that this can happen after the standby/hibernation mode, that this sound card is not recognized correctly. To resolve this problem, you must install the hotfix for Microsoft Vista (937077 KB) on the Microsoft network site: http://support.microsoft.com/kb/937077

    Just a question: have you noticed this problem since the first day or after a few days of use?

  • Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

    Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits

    I tried to change the windows profile to optimize or energy saving. but I still get the fan noise. Set the bios to 3.90. I have re-checked windows 8. and always the pleasure is strong. When no cpu is used.

    Notepad is cool - so I don't know where is the problem. It's probably bad driver for ACPI or for measuring the temperature. I tried to change the position of the laptop - and I found two metal plate on the bottom.

    I think that it is a measure of temperature sensors. When I flip the laptop, and the plates are "we air ', not touched by any material - the fan will slow down in a few minutes.

    Could someone tell if no pleasure of speed will work? or maybe Toshiba updates the bios or drivers for it eventually?
    Comfort for laptops of business is very bad. I SDS - and this is also limited. I didn't assume that Toshiba will sell such a sh...

    If someone could have some drivers or set which will slow down the fan under 64-bit windows?

    T.

    Hello

    You can set Windows Power plan settings in order to improve the cooling system.


    Changes in the operating system:
    --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

    Changes in the Bios (power management):
    Intel Turbo boost Technology

    Changes in the operating system:
    TOSHIBA HW Setup--> the CPU frequency mode

    Try this settings:
    Plan (Toshiba power save) optimised battery
    Technology Intel Turbo Boost (BIOS) - disable
    The CPU always low frequency

    From my experience, this should reduce the noise.

  • Tecra M3 crashes regularly with a sound strange fan

    Hello!

    I'm new running (dec ' 05) Tecra M3 with Win XP SP2 and all the patches applied. The problem is that it crashes regularly.

    The symptoms are the following: display image suddenly freezes, machine responds more fully while begins to make the nosises of the "jet-engine-like", i.e. to Monte and down. The only way out of the machine is reset. Today I have updated the BIOS 1.40 (initially he 1.30). And already had two hangings. :-(

    Any ideas what could be the reason?

    Thank you!
    Alexey

    Hi Alexey

    the hangings and the noise of the fan can be connected.
    If a fact request the sponsor system to stop it might happen in some sort of loop that will make the CPU is enmeshed in this loop and the really hard work. In this case, it also generates a lot of heat, and so the fan will kick and work extra hard to cool the CPU.

    So what does this mean for you? Well, first of all don't bother on the fan. He will do his job well.

    On the contrary, trying to figure out if there is a single application or a process that is running when this happens. Try things out of the band down by eliminating certain processes and see if the situation improves.

    Think if you have installed additional memory. If so, remove it and try working with the machine for a day or two.

    Hope to have helped you

    Tom

  • Tecra S2 crashes during playback of DVD of battlefield 1942 or watch

    Hello

    I have a Tecra S2 with the following specifications:

    1.73 Ghz
    1 GB OF RAM
    GB of Nvidia 6600

    Software:
    Operating system recovery cd
    MS Office
    Norton Internet security
    Logitec Webcam drivers
    Sync Nokia Software
    (all updates made)

    When I play Battlefield 1942 or watching DVDs, the laptop fails. The screen freezes just after playing for a while. Nothing works anymore but the reboot of the computer (with prolonged pressure on the power button). While I can play before the crash varies from 1 to 30 (+) minutes. It happens with battery and AC power (with and without the battery).

    I tried to disable the sound card in the hardware Manager. I have disabled all programs beginning on startup with msconfig. I reinstalled the drivers of graphics (Toshiba download). I played a bit with the resolutions and other graphic parameters.

    Nothing helps.

    Any ideas?

    Thanks in advance for the help
    Charly

    Hello Karl

    It's not easy to say why your device breaks down but the high temperature can be a reason.
    If play you games or watch DVDs all the laptop parts (i.e. graphics card, CPU, etc) running at high performance and produce a lot of heat. In this case, you should check the cooling fans if they can work properly and if they are clean. If this isn't the case, you can use the vacuum cleaner to clean the fans. If the cooling fan is dusty it can t work properly and the temperature rises.

    Good bye

  • activation of cpu for 64 bit os

    Hello

    I need to know if my 4 x instances virtual of MS Windows Server 2003 R2 Standard edition SP2 32 bit still will start if I change the VM breaks config CPU to support the Win 2008 r2 64 bit opperating system.  I'm afraid that they crash or start not propperly after the change was made.

    CAN someone eplease give me pease of mind.    All of my virtual servers will start if the cpu is enabled for 64 bit opperating suystems?

    JS_Marley wrote:

    Can I trust you?

    Even I don't trust myself!

    Just wait for others to post here... I have time... I can wait...

    Intel-VT activation is essential to run the 64-bit clients. This does not activate 64 bit itself, but other things that VMware needs to run 64-bit guests.

    The brother-in-law of a cousin of a colleague of my wifes sister running the 32-bit clients and 64-bit all and I heard he should have said once, it happened often enough that it had to be activated after all has been set up and running.

    AWo

  • Activation of VCA mode for cluster production

    Hello

    I have the following configuration:

    • Existing Cluster_A with ESX 3 hosts running on the processor Intel Xeon E5540 (Nahelem)
    • 30 VM runs in a production environment
    • 2 new ESX hosts running on the processor Intel Xeon E5649 (Westmere)

    2 new guests are not added in vCenter again, but the goal is to allow the addition of these 2 new hosts in Cluster_A.

    I understand that, in order to have all 5 hosts in the same cluster, EVC mode must be activated with the highest level being "Nahelem" (lowest common denominator).

    From a theoretical point of view, masking any CPU to apply will be identical to the current CPU presented the virtual running machines, settings allowing CVS using the same architecture CPU should not cause conflict or problem.

    Therefore, I would ask you confimation that activation VCA and Nahelem for Cluster_A upgrade will not cause downtime or impact (e.g. BSOD) to the virtual machines.

    Thank you

    Kenny

    Therefore, I would ask you confimation that activation VCA and Nahelem for Cluster_A upgrade will not cause downtime or impact (e.g. BSOD) to the virtual machines.
    Kenny

    Hello

    Is 100% safe operation (done many, many times the performance of clusters). No side effects :-)

    1. create a TEST VM
    2. Add the new server ESX to vCenter
    3. put in maintenace mode
    4. Add to the cluster
    5. allow to LCA
    6. exit maintenance ESX
    7. try to vMotion between the old and the new node in a cluster
    8. If vMotion won't work, says André, you should turn off the virtual machine and run it.
  • Illustrator crashes after editing in model mode

    I use Illustrator CS6, Windows 7, Intel (R) Core (TM) i7-3770 CPU @3. 40 GHz, 16 GB RAM, 64-bit operating system. I use the characteristic editing model a lot, and recently it starts crashing, usually, when I try to save after editing in model mode (it started just to do this). I don't know why he started doing that, and it doesn't have anything to do with the complexity of the design. Any advice would be appreciated.

    Since you said recently watched crashing, very probably reset you AI prefs will solve this problem.

    Start Illustrator, then immediately then press Ctrl, shift, Alt to reset the prefs.

  • Sierra crash when after the "sleep mode"

    My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

    I try to reset the SMC sama NVRAM but always crash.

    suggest to solve?

    Thank you

    When you say 'crash', what do you mean?

    Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

    You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

    You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

  • Safari crashes after waking from sleep mode mac mini

    And to make things more awkward, it seems to freeze with youtube and google. He has not done this since the beginning. Lately, he's starting to do this. It is so boring. All other sites work except these two, or at least those's ones I learned to freeze. Open a new Help window sometimes. But earlier, I had to start the mac everything again to access youtube. So what to do? After the mode 'sleep', I can't seem to google, but I can get to atavist for example. YouTube is the only place that I can't replace and for real - it's so idiots clitch he needs an explanation.

    Try the suggestions in this article http://osxdaily.com/2015/01/18/troubleshoot-safari-freezes-crashes-mac-os-x/

  • Firefox worked FINE yesterday and it auto-updated and now whenever I load the Web site, it crashes immediately, even in safe mode. Help please?

    I tried the following-
    refreshed Firefox
    uninstalled/reinstalled firefox
    safe mode
    removed the malwarebytes program due to work for someone else
    has ran my spyware, zero results returned

    Chrome works very well. Everything else is fine. Firefox had no problem until it auto update last night. I can't submit a crash report because every time he asks me I say Yes and then he tells me 'problem presentation report '.

    This looks like a problem with the NVIDIA Network Access Manager.

    • BP-db6d3841-B1A5-49B3-b0bf-4bdac2151222

    There is a version of Firefox 43.0.2 planned to block this NVIDIA driver, you can try to install through this site:

    Otherwise, you can check the control panel so you can find "NVIDIA Network Access Manager" or "NVIDIA ForceWare Network Manager" and uninstall this software.

Maybe you are looking for

  • Cannot install Windows 8 on retina Macbook Pro 2011

    I try to install and run Windows 8 on my Macbook Pro 15 "retina end 2011 with OS 10.10.5." I read a ton of forums, and they say all get a Windows 8 ISO from Microsoft Web site. I did it. Then, they say get a Virgin USB key and plug it in. I did, and

  • Possible NB520-108 - increase RAM to 2 GB?

    Hello I don't want to increase the RAM which comes with the NB520-108. I know that one is 1 GB memory DDR3 at 1,066 MHZ. I can't find this speed, and my question is: can I put a 2 GB of DDR3 memory module 1.333 MHZ? Thanks to everyone in advance. Kin

  • Skype Api for video calls using SKYPE4COM.dll in c#

    I want to integrate Skype video call on my Web site, is there any /API tutorial using SKYPE4COM.dll refer. Please help me give some mention the link to Skype video calls with asp.net c#. because most of the links that I checked is dead or cannot be f

  • Selection of tab key Excel - how to use? Keyboard selection button

    HI, I have to do a lot of replacement of cell data. I so need to use the keyboard, not the mouse or trackpad as its more convenient. I have "Ctrl + H" pull up to the window replaced. But how to select the buttons below as ' Rplace all ' or 'close' us

  • I can't open Twitter or Facebook of Safari on my iPhone.

    Whenever I try to open the twitter of safari, safari gives me that an empty site there is nothing on it just (opened in the twitter application). I Googled it and they said a lot of things and I tried a few: 1. clearing safari history. 2 clear histor