Tecra S2 video input

How can I put on a video input on my Tecra S2. I want to play Xbox 360 in HD on my laptop. Is this possible? Maybe there is a docking station or something like that.
Hope someone can help me
Greetz

Hello

AFAIK the Tecra S2 has only one exit of S-video port.
But I put t know how you want to play Xbox? You want to use the laptop as a TV?
I don t think that it is possible to do.

Good bye

Tags: Toshiba

Similar Questions

  • Video input to my desktop PC

    I have a desktop HP Omni 100-5050 PC and would like to get video to use as:

    -Monitor (to connect my phone to the pc via the VGA input)

    -Use it as a TV, video receiver connection to pc via / cables V.

    However, I have seen just "video out" port on the pc.

    Is it possible to use it as a video input (vga or AV)? Otherwise, any what possible adaptar to use for this purpose?

    Thank you

    Alex

    Still, your computer has no video inputs or outputs. The ports in your photo are not video outputs.

    1 - LAN (ethernet)
  • No message signal to s-video input on the screen - how to remove it?

    I pressed a button on my monitor by mistake, and now I have a blue box with the message "no s-video input signal" on the screen at all times.  It's annoying because it's in the upper right corner, covering the buttons I use to close, reduce and optimize windows.

    I tried right click but nothing happens.  How can I get rid of this error message?

    Hi AnneHotmail,

    1 What is the message appear after you restart the computer?

    2 are you able to show display on monitor other than the blue message box?

    3 is this a laptop or desktop?

    I suggest that you restart the computer and check if it works.

    If restarting does not solve the problem, then check and ensure that the monitor is connected correctly to the computer.

    Also try the method below and check if it works.

    (a) turning the computer off.

    (b) disconnect all cables from their bottom or the sides of the monitor (particularly the power cord). Unplug the power supply cord releases all their reset circuit locks

    (c) press and hold the power monitor for 5 seconds button

    (d) plug the monitor power cord

    (e) turn on your computer and check if it helps.

    If the previous step fails, then you will need to consult the manual of the monitor to restore its default settings or contact the supplier of the monitor.

  • No video input for monitor and powerless keyboard - computer has the power

    My computer of girls, with the XP system, has the power (power light flashing & the fan) but the monitor receives no video entry and keyboard is dead.  I tried another monitor, but still no video input.  Suggestions for remedy to appreciate.  Thank you, Pat J

    You are more than welcome to help.

    I don't want to throw another curve ball, but I was working on a computer the other day who had the same symptoms as your daughter. The computer would turn on but nothing on the screen. I replaced the graphics card and still no dice. I don't know what made me do but I removed one of the sticks of ram and bam! The graphics was back. This isn't the way that computers are supposed to work. Either the graphics or the ram of the computer must issue codes beep on startup when a component fails. Beep codes each model represents a different problem. I guess what I mean here is you can try to remove one of the sticks of ram and then start the computer. Repeat for each stick. If you intend to go inside a computer, unplug the power cord to the computer before opening the case to work inside. With his unplugged cable press and hold the button for 10 seconds. Make sure that you do not work in an area with carpet covered floor. Repeat these steps each time that you turn off to check a different key. If the icons still do not appear, you are left to try a new graphics card. The one I linked to is a decent card at a fair price. However, if check you with you parts used computer repair shop (not these geeks of department store) you can find out who sells. Tiny most computer stores sell these items and they are generally tested before being put on sale.

  • HT-TC 260 Sound does not work via the video inputs

    I recently bought a bar of its HT-CT260.  If I plug the cable box bar using the optical connection, then it works fine.  If I plug the optical connection between the TV and my PS3, then it works fine.  But I get no sound, if I plug the bar directly to the optical input on my Sony KDL-40xbr2.

    Oddly enough, the bar works (TV at the bar) if the TV is on channel antanna, but not if I use the video inputs for my box of cable and the PS3.

    Spend 3 hours with Sony (useless) online support and assistance phone sony (well, but not solves is not the problem).

    The optical plug is designed to produce sounds when the content you watch contains audio digital. (PCM or Dolby Digital® technology) This feature is available on a selection of digital and video streaming shows and is not compatible with the standard of cable stations or analogue.

    The KDL-40XBR2 TV can only output sound via the connection perspective If the TV is using its own tuner (i.e. If the TV is connected to an antenna or direct cable line in the wall) which explains why you do not get sound when using the video inputs because cable box and PS3 use external tuners to your TV.

    If my post answered your question, please click "accept as a Solution.
    This will help other users to easily find their answers when you browse the site of the community of Sony.

  • noobie: configuration of the video input of the project?

    A noobie question: setting up a project always throws me since I have unusual videos sizes of graphics that I use as art films - so less standards. Simple, I want to take a video of art existing I have done (computer graphics), get it to the CS6 Pro first, make a few changes, in this case just speed upward and export it réécrirait in the same format/size/specs. Is it possible that I can have the configuration of a project inspired by the video input. Or an easy way to get the exact specifications of good project for the first based on the video input that I have. My video is a mpeg4 is 1440 x 1080 to 25 images dry with no sound. Any help is appreciated.

    -steve

    One of your 1440 x 1080 25 fps clips drag and drop on the "New item" icon

    or right click on one of the clips and select "new sequence of the Clip.

    This will create a properly configured sequence that corresponds to the ratio of aspect and fps of your clip.

  • Switching the video inputs

    Hello. I have a Sony KV2585SA TV with 2 RCA video inputs. On one I have connected a DVD player and the other has connected TV satellite. Using the remote control (RM687c) how to move from one entry to another? Thank you.

    Check for no TV/VIDEO button on the remote control to change the entries. You can go through the link below and try to change the video inputs.

    http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C158311

    If my post answered your question, please mark it as an "accepted Solution".

  • DVD will play is more about Tecra M - video memory

    Hello

    I tried to read a DVD this morning and WINDVD player gave me the message: insufficient video memory for DVD playback at the current screen resolution. I tried in Windows media player and I can hear but no video.

    I reduced the resolution to 800 x 600 but I still get the same message
    and anyway, I played successfully DVD several times.

    I can still play notice OK, just DVDs of the drive or folder that fail.

    Anyone got any ideas?

    Thank you

    Chris

    Hello!

    What laptop Tecra you have exactly?

    I think that you must reinstall WinDVD and Windows Media Player doesn t work again why don t have a codec package installed I think.
    So, try to reinstall WinDVD and try another player like VLC media player. It can play a large number of audio and video files.

    Good luck!

    Good bye

  • Video input

    This has been a persistent problem. I gave up on that a long time ago, but now for I am determined to make it work. Hoping that someone out there has an answer. My desktop computer multimedia m8034n HP came with Vista. I've upgraded to Windows 7. The upgrade took programs. I bought this PC for its inputs: S-video/video, audio on the back and video, L R on the front, so I was able to capture my old videos (Beta, VHS, Hi-8) and digitally working on it when I retired. Well I took his retirement more than 3 years ago and still not get MuVee or any other program to see the entries to the front or the back of the PC. He see my webcam, but that's all. I have a professional Hi-8 bridge S-Video and audio L R connected to the back of the PC. I also have the Pinnacle Studio HD program that will not see it. Then someone know how I can get this PC to see the entries so I can start my retirement project? I'm not rejuvenate! Thanks for any help you can offer.

    Hello

    Of the following information (features):

    http://support.HP.com/us-en/document/c00913712

    I think that the best option is to use the 1394 (firewire) port at the front or the back if your camcorder also has this port (what is it?). Your computer is more than 5 years old now, find all drivers for Windows 7 may not be an option. Vista is a little slow, but you can just stick with Vista in this case. I actually bought a $70 video capture card for my old PC and then fixed the problem. I can convert all my VHS to DVD tapes.

    Kind regards.

  • Tecra A11 - Video No. via mini DisplayPort

    Hello

    I recently bought a mini DisplayPort-> HDMI cable to use with my Tecra A11 Notebook. My intention was to run two external displays by running a cable VGA for my LG W2242 monitor and run the mini DP to HDMI Cable to my HP 2509 m Monitor. Unfortunately, I can't get my HP Monitor to recognize the video Signal from the mini DIsplayPort.

    I downloaded the latest drivers for my laptop, but still no luck. Is there something special I should do to get the mini DisplayPort to send a video Signal?

    Any help would be greatly appreciated.

    Kind regards

    Landon

    Now to maybe stupid question, but where did you get the info that you can use two video output ports at the same time? What is this described in manuals s?

    In front of me, I have Tecra A11 - 19 M and would like to know how to use it. as far as I know that a single external display can be used with this laptop.

  • Tecra S10 - video configuration TurboCache

    Hello

    As you guys know now, Tecra S10 comes with a Quadro NVS 150 with 256 MB dedicated memory and beyond 1 GB of TurboCache.

    Thing is that I don't really need so much video ram so I thought that if there is a way to change this.

    So, I could increase my available to approximately 3.5 GB 3066 MB ram system. I have 4 GB on my system and theory
    I should be able to see at least 3.5 GB on Vista32 of RAM available on the system, but I'm guessing that turbocache he reserved.

    Best regards

    j.c.

    Hello

    The turbo cache cannot be manually set to a lower value.
    The point is that the value of the turbo cache depends on the amount of RAM.
    The more value RAM more turbo cache.

    Everything is controlled automatically by the graphics driver

    But note; the value of the turbo cache is not only all the time. If an application does not need full turbo cache then this will add to the value of the RAM again.

  • Qosmio G30 - video input using WinDVD Creator and WinDVR 5 problems

    Hi all
    My G30 (PQL32L) supplied with Windows MCE. It has preinstalled WinDVD Creator 2 and personally I install WinDVR 5 (application of part 3 came with my Plextor ConvertX PX-TV402U PVR).

    Problems:
    1 WinDVD Creator 2: failed to set the TV system. I plugged my video source via the video cable (yellow, white, red) provided and connected to the AV-in port. I chose TV on the HARD drive for the new project. Default WinDVD defined as NTSC but my TV system is PAL. Therefore, input video quality is blurry and cut in two. Once I changed the setting in the software of PAL, the video screen turned black and no response. I have no problem with Qosmio Player with the same configuration of the connection.

    2 5 WinDVR: Application can not start correctly (hang and cannot complete the program) I to my Plextor ConvertX PX-TV402U PVR TV source, then connect it via USB2.0 for G30. My ConvertX works in my office, but failed with the G30. The application cannot start properly and hung. No response yet I'm trying to complete the program, but the screen was always there. When I try to stop my G30 then Windows MCE hung at the "Closing Windows" screen. I have to stop by pressing the button. ConvertX being operation USB cable, it is not achievable in Qosmio.

    Can someone help to solve these or give advice?

    Fine thanks
    Samuel

    Hello

    I copied the film on my camcorder for Qosmio G30 (WXP MCE) without any problem and subsequently created the DVD using Ulead moviefactory program. I also tested it with VHS-recorder. Once again without any problem!

    My camcorder was connected with firewire cable and it has been recognized correctly. VHS-recorder was connected with the aerial cable simply. I was able to record sources using Qosmioplayer (it was just to test because I'm interested, how it works). Movie from VHS-recorder was also possible to record using Media Center Edition.

    I know I also tested it with pre-installed Win DVD Creator but camcorder has not been recognized as usual. If I remember well I put the TV source and that the camcorder is recognized correctly. To be honest I don't like this Win DVD Creator and I have not tested properly.

    So I would like to know what your video source and what you hear in AV-in port.
    Please tell me exactly what cable you use for audio/video data transfer and exact port on your Qosmio laptop?

  • Video input with Qosmio G20-108 problems

    Hello
    I try to connect a video recorder/player for my Qosmio G20-108 and have had no luck so far.
    Tried the red-yellow-white cables that came with the laptop, can get sound via the laptop, but no image.

    Then tried the input cable tv/satellite of the RGB output on the video via Media Center but can't get the laptop to tune into the video signal - just says there is no signal detected even when the video player is on and play a tape.

    Any ideas anyone?
    Thank you, Rob.

    Hello

    Qosmio G20 supports a port of 4pol TV In great video (S-video) and a TV S-video output port!
    Don't mix these two ports!

    He must connect the VCR to the * TV * S-video port!

    Best regards

  • Tecra S2 - keyboard input "LAG".

    I just formatted my hard drive & reinstalled windows XP, some drivers Toshiba, McAfee Virsuscanner 8 and MS Office 2007. Everything works fine, except my input from my keyboard.

    I can use the key, but it takes forever before anything is printed on the screen (this happens in all of my software like word, IE,...)
    Y at - it a software/driver I need to install to make it work properly. Until I formatted, everything worked well.

    Thanks in advance

    Can you please test when McAfee Virsuscanner is disabled?

  • Tecra 8100: Video-playing DVDs only with jerking / glisten under W2K

    I can't play a normal DVD on my Tecra 8100 (P3 600 MHz, 256 MB RAM, Windows 2000 with SP4)
    without convulsions. Already have try to copy the image of the DVD on the HARD drive and play directly from the
    HDD - same result. Therefore, it is NOT a problem with the DVD drive, may be a problem
    with the S3 S3 Savage/MX VGA-Cardinal display driver integrated V installed 5.12.1.7002.
    Tested with PowerDVD 6 and VLC media player. Any special DVD playback software for the
    8100 available? Please help, try several hours to solve this problem, already
    talk with toshiba customer service!

    Hello

    Well, the Tecra 8100 is not a high-performance notebook and maybe it is not generally possible to watch DVDs jerking-free s.

    But I think you should check several parameters before we abandon ;)
    In order to check if DMA and not PIO mode is available and updated on the IDE controllers.

    Check if you have installed the latest version of DirectX.
    You said that you are using the latest version of the graphics driver. Well perhaps you will check this site:
    http://www.S3graphics.com/en/resources/drivers/legacy/software_archive.jsp#id_290298drv

    Also check if the installation of some codex will help you:
    http://www.DivX-Digest.com/software/nimo_pack.html

    The Nimo Codec Pack is a nice collection

Maybe you are looking for

  • Satellite L300 - error failure of Webcam driver

    Hi everyone on the forums of Toshiba. I have a Satellite L300 and I did a clean install of Windows 7. When I try to use the webcam, a message "driver webcam camera failure, turn the power off or restart the computer" or something like that. I read a

  • Is there a way to enlarge my MEM

    I have a Stream of Notebook PC 13 with 32 GB of mem. How can I get more space. I deleted everything I don't want / need, but I still have only 3 GB left. Is it a MEM liked I can get installed my laptop? Thank you

  • Open the windows Explorer with no expanded document folders

    I would like to open windows explorerer with undeveloped Document folder.  It is for Vista, saw tips for XP but not tried yet Thank you

  • WndOws Update (windows 7 Home premium)

    Can't update anything on windows update. I used the troubleshooter and received the error windows 0X80012EFD (2016-08-15-T-04_25_14A). If anyone can help or give me any information that might be useful I would be very happy, thank you!

  • change the PAP entry

    I have a new KDL-50R550A. So far, it looks like a big tv, but I am disappointed by the PIP/PAP function. He takes too many keystrokes to access its small size is too large and PIP does not work with any input except for a PC. I have a question about