Tecra S3 Advanced Port Replicator III more: video output, analog & digital

I have a Tecra S3 in association with Advanced Port Replicator III.
I can't get the two graphics cards to work together.

The analog and digital video output should work together.

It works on a Tecra S2, but not on the S3?
Does anyone have an answer?

Hello

You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

So that would mean that the backs of Tecra S3 not supported this feature

Tags: Toshiba

Similar Questions

  • Advanced Port Replicator III more compatible with the Portege R200

    I just ordered a new Portege R200 and above-port replicator... However, I note that the R200 is not listed in the list of laptops supported for this Replicator! Can anyone confirm if I have made a mistake and need to change the order?

    Will be

    I visited the area Options & accessories on the European site of Toshiba, and like you said the Portégé R200 is not listed in the list of mobile phones compatible.
    So I assume that the Advanced Port Replicator III more (PA3474E-1PRP) does not support the protected R series.

  • Where can I download a manual for Advanced Port Replicator III more

    Where can I download a manual for this?
    I have searched the manuals download section but could not find a reference to it.
    Thanks for any help

    Seems that this manual is not available in the Toshiba user manual page.
    But generally, you should receive a manual as well as the Advanced Port Replicator III more.

  • Tecra M9 longer works with the Advanced Port Replicator III

    Hello

    I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

    Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

    Question: * the M9 will work with my plu III advanced port replicator? *

    Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

    If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

    All thoughts welcome...

    See you soon
    Daniel
    --

    Tecra M9 and Tecra M5 do not have the same docking connector.
    This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
    You need the correct docker for each system.

    May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
    http://www.dynadock.com

  • Advanced Port Replicator III and Tecra M5 - compatibility issue

    Hi all

    Had a brief search, but could not find a similar position.

    Is the Advanced Port Replicator III PA3314E-1PRP compatible with a laptop Tecra M5?

    Thanks in advance and amicably.

    James

    Yes, it is compatible, I can confirm this info above
    If you wish, you can consult the Web of Toshiba Europe site Options & accessories.
    You will find this info useful

  • Tecra M3 and Advanced Port Replicator III: not recognized as docking station

    Hello!

    Just install my new M3 and Advanced Port Replicator III. Everything works fine, but the Port Replicator is not recognized as a Docking Station (No disconnect in menu button start XP; pressing disconnect button on the Port Replicator itself has no effect either).

    Is TI WHEREAS behavior?
    Thank you in advance.

    Hello

    You reinstall the unit with the recovery CD?
    As far as I know that the TOSHIBA Mobile Extension3 for Windows XP is responsible for the good condition of the market of the docking station.
    Well, I recommend to reinstall this driver and utility.
    Perhaps the installation of the new driver will solve this problem.

    Good bye

  • Tecra A8 and Adv Port Replicator III - no audio output from the port replicator

    I have a Tecra A8 anchored on an Advanced Port Replicator III. All ports (network, USB, video) with the exception of the AUDIO ports seem to work well. I can get sound from the headphone jack on the front of the A8, but nothing since the station docking ports. Is there a docking station driver or something I need to install to get the sound from the docking station not the laptop?

    Hello

    The Advanced Port Replicator III supports the line and line port left.
    As already suggested by user above; Check if you are using the command-line output port!

    Welcome them

  • Need Advanced Port Replicator III drivers for use with my Portege M300

    Hello

    I have a Portege M300 with an Advanced Port Replicator III. I had to reinstall the operating system and now can not find the drivers for the port replicator.

    Can someone help me? I am running Win XP

    Thank you

    Hello

    I guess that you need drivers for the XP operating system. Am I wrong?
    You will find on the page of the Toshiba driver all drivers needed and utilities for Portege M300.
    You will also find the installation instructions document. This document shows the proper installation order.

    You simply download all the drivers and follow the order of installation. All that s

  • Tecra M3: Failed to connect to the double monitors w / Advanced Port Replicator III

    I use a Tecra M3 I put it in place for an III Advanced Port Replicator and I can't dual display to work properly. I have a monitor connected to the DVI port and then another connected to the VGA port. It seems that the laptop is the 1 view and can get only one monitor to work. How can I get the two external monitors to work?

    Thank you
    MBorchardt

    Hello

    In my opinion, you can use a single external screen because you can choose between analog display, the TV and digital flat screen. As far as I know, you can use the FN + F5 keys to change between display devices and can only be set to an external TV or CRT and LCD monitor internal. But not to external displays.
    In addition, I propose to refer to External monitor in the manual which is preinstalled on this device.

    Good bye

  • Tecra M4: Cannot get com-port working on Advanced Port Replicator III

    Hi all

    I bought the advanced III PA3314E-1PRP port replicator but could not get work com-port.

    It does not get listed in my equipment manager.
    Anyone has an idea why not?

    Thank you very much in advance!

    See you soon

    Infinito

    I agree with Akuma
    (The name says it all) port replicator replicates the available ports on the laptop.
    If your laptop does not have this port, then you cannot use it with Port Replicator.

  • Portege M750 on plu III Advanced Port Replicator

    The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

    Hello

    I discovered that the Express II port replicator is compatible with the Portege M750.

    I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
    http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

    However, the M750 Poretge is not listed as a unit compatible and taken in charge.
    So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

    Welcome them

  • Tecra A8: Problem with the USB printer connected to the Port Replicator III

    Hi all

    I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

    I called the technical support of my country, but her is not recorded similar problems.

    A person with similar problem? Some help would be very appreciated.

    Thanks in advance.

    Hello

    Seems like a strange question... Already done the standard procedure in the event of such errors? :)

    The standard procedure is somehow similar to the following:

    -Update your BIOS
    -Update all the drivers for your machine
    -Update your printer drivers
    -Update your operating system

    If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

    Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

    I'd be happy to hear feedback from you on your situation...

    Welcome them

  • III Plus driver/Frimware Advanced Port Replicator

    Hello

    I'm having some trouble with my M300 Poretege on Advanced Port Replicator III Plus. Some Fn keys do not work, and I'm not able to get proper display on my external monitor.

    Question: are there drivers for the Port Replicator? I don't have a CD or other installation media.

    Thank you, Richard

    Hello Richard

    Give us details please! These FN keys work without portreplicator? Don t FN keys work correctly?

    Check if the graphics card supports display resolution you have to put on the external screen.

  • Port Replicator III + very high CPU when you move the usb mouse only in W2k

    Tecra M2 with a port replicator III +.

    It is set to dual boot XP and Windows 2000 (yes I know it is well a bit but I have a bunch of stuff installed in win2k it is difficult to find these days).

    XP is very good at 100%, but with win 2000 if I use my * USB mouse * on the * ports port replicator and waggle the mouse around - the * CPU * jumps from 0 to * 70 + % * use (System process that seems indicatates like IRQ problem). If I plug the mouse into the ports of the laptop (when the laptop is connected) - it's fine, no more than 5% cpu usage. It's a microsoft basic mouse. I really believe that this is a problem of usb any, because the cpu jumps a little if I type quickly on my usb keyboard (only a few %). It comes with the usb ports on all the Replicator.

    Any ideas? I don't really want to plug my mouse in the morning because it beats a little interest to have a docking station in the first place! I have installed mobile extensions. All other aspects of the replicator are fine

    Martin

    Huh it will not be easy to find the right explanation for this.
    At the moment when Tecra M2 has been offered on the market as Replicator port compatible Toshiba offered Toshiba Advanced Port Replicator III (no +) and at that time both supported in operating system has been tested with it.

    Toshiba later designed Toshiba Advanced Port Replicator III + and confirmed the compatibility with Tecra M2, but obviously with more recent WXP (at this time).
    So now, you've been following situation: you use most recent Replicator port, but with much older operating system so I assume that there may be a compatibility issue with W2K.

    I can't imagine use you so often with W2K and if so, may not be so problematic to connect the mouse directly on the cell s USB port.

    Sorry, but I don't think that there is nothing you can do about it.

  • Tecra M5-compatible Port Replicator of Tecra 9100 is?

    I have a port replicator (model PA3082E-1PRP) for my old 3 years Tecra 9100 defective. I'll buy a Tecra M5. Do I need to get a new Port for the M5 Replicator or my old one is compatible with the new computer?

    Hello

    I think that it should be compatible.
    But on the Toshiba options and accessories site I found that these devices with M5 supported:
    Advanced Port Replicator III PA3314E-1PRP
    III Advanced Port Replicator more PA3474E-1PRP
    USB 2.0 Port Replicator II (Ethernet / EU Version) PX1173E-1PRP
    USB 2.0 Port Replicator II (Ethernet / UK Version) PX1173U-1PRP

    To my knowledge, these are the most recent port replicators which are available may be so old appliances are not listed.
    I think you could try carefully connect the laptop with your old port replicator.

Maybe you are looking for

  • Not available at startup Windows partition

    So I've been running windows 7 on my Macbook Pro Midi 2012 El Capitan for about a week now with no problems. I recently tried to allocate more space to my HD Apple bootcamp. Now when I try to boot into windows, there is only the option to start in MA

  • Agilent 34410 on e-net?

    Greetings, I have LabView 8.5 and a project currently using GPIB. (Agilant 34420) I did more have a GPIB Board (moved to a mini pc) and you want to use the Ethernet connection on my 34410 a. So, how to add it to the list of available items in the M &

  • WoW error blue screen stop 0 x 00000116

    After you download the Cata, I was playing WoW. updated and now whenever I go to a certain place, it gives me a blue error screen.  my computer info is:                                                                                                  

  • Lack of button "clean up system files".

    I tried to run Disk Cleanup and clear up some space winsxs takes too much space, but I noticed that the button "Clean up system files" is missing. I use Windows 7 Ultimate

  • Change language in Hp Mini-Note 2133

    Hello I recently bought a Dell Mini-Note 2133 online in my country (Netherlands). Because I live there, I want my OSS in Dutch language. For some reason any my language appear in the initial Setup, so I had to choose English. I still want in Dutch an