Tecra S3 does not start when the multimedia center of Toshiba is connected

Similar Questions

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Tecra M9: Does not start at the local network after the value of BIOS password.

  Hi all, I have configured a supervisor BIOS password on a number of Tecra M9s but later found that this does not allow books to be PXE started - and a number of them require now that rebuild.

  I tried pressing the cursor keys in the first screen flash "Toshiba" (with the device down icons), but this will not allow to select the boot device - it's as if the keys are not pressed.

  I also tried to get into the BIOS to change boot device priorities, but I can't just to get into the BIOS in a limited form - there is no prompt to enter BIOS password.

  In brief - how can I work around this? -J' I need to know how to get the BIOS to ask the supervisor password (pressing ESC then F1 at boot only gives me the 'limited' BIOS)... Or, how to get the laptop for a PXE boot with a BIOS supervisor password.

  Thanks in advance.

  Hello

  I would recommend pressing the F12 key, immediately after that the laptop has been powered.
  This would allow the start on-screen menu.

  Then choose the HARD drive as the boot source.
  Then you could boot into the operating system and could use the Toshiba HWSetup to clear the supervisor password.

  I guess the password is known to you

• Why Wizard does not start when the current user?

  Program does not RUN. Wizard does not open after you select the Option for the current user

  P.S. If you can't always install Firefox, even using the FULL Installer:

  Reinstalling but this time download the file on your computer. When the download is complete, install it as an administrator by right clicking the configuration file and select "Run as Administrator".

• screen saver stopped working setting changed forever appear to work then check the app does not start when the time is in demand

  The screen no longer works check all setting is very good and pictures are included in the window but will not start us time is programmed was working fine but stopped for no apparent reason

  -Try to start safe mode and normal mode then

  OS x: what is Safe Boot, Safe Mode?

  -Then try to delete the .plist preferences system

  Removal of the preference of the system or another .plist file

• 29RC1 Firefox does not start when the update service enabled.

  W8.1 update 1 running. I installed FF29RC1 that works without problem, however when I close FF I can't repeat it because it says its already running. When I stop the service of FF in the Task Manager, turn off the update in the FF options, it works wihthout no problem and I can start FF whenever I want without any problem.

  29,0 Firefox has been released, so no need to install a release candidate.

  You can find the full version of the current version of Firefox 29,0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

  Have you checked in the system monitor if there is still a running Firefox process?

  Did you install Firefox in your user account (~ or/Home / < user >) or in a place that requires root for write access privileges?

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

• Tecra 8200 does not start with the new memory module

  Hi, ive just rode this memory to my willingness to .it tecra 8200 not initialize the message comes up / remove the incompatible memory in B / someone knows why?

  Memory for laptop IBM 256 MB PC100 144 pin SDRAM SODIMM

  IBM FRU L 33, 3070, 256 MB PC100, SDRAM SODIMM, no parity, 3.3 volts, 144 pins, 32 MB x 64

  Thanks for the replies biff

  Hello

  Well, I really put t know why this message occurs. It seems that this module must be compatible with your device. Are you sure that the module has no fault?
  Have you tried to use this memory module in Bank?

  Otherwise I found other compatible memory modules.

  PC100 256 MB (PA3069U - 1 M 25)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  http://www.frontline.co.UK/product_detail.aspx?pid=MEMKNG5662

  Good bye

• APEX listener 2.0.1 does not start when the system starts

  APEX listener 2.0.1

  APEX 4.2.2

  Oracle EE 11 GR 2

  Linux RHEL 6.3

  GlassFish 3.1.0

  -------------------------

  After the reboot of my Linux server with the configuration above, the listener of the APEX is broken and must be restarted by GlassFish. This may be the cause?  How can I get the APEX via GlassFish listener to restart the power-up system?

  NOTE: I don't have this problem when you use APEX listener 1.4 to the same server GlassFish.

  Thank you.

  Found the problem.  chkconfig was before the database has increased the age GlassFish and running.  Chkconfig changes of the parameters in the startup scripts. Works very well.

• BI server does not start when the deployment improved SPR

  Hello
  I'm new to OBIEE 11 g. In my project I have a RPD 10 existing g HT. I upgraded to version 11g.5. I restarted all services. When I deploy improved SPR, biserver is a descendant. But if I deploy SampleAppLite.rpd (oracle supplied), all services begin. only for my bi Server RPD is going down.
  
  I don't know where it might be the problem...
  Pls help.
  
  Thank you
  Smita

  Hello

  This is a change in behavior when we have 10g and 11g. In BI EE 10 g, there was no Oracle Client delivered with BI EE. Thus, BI EE will use your Oracle DB client host to connect to the database. Usually not a problem in this case. But in BI EE 11 g, the software itself contains a client of 11.2 DB. Thus, when you try to connect to the database using the repository or the BI server, it will try to find the tnsnames entry in the customer Oracle of BI EE 11 g instead of your database. There are 2 options to work around this problem

  1. copy your tnsnames.ora {Oracle_BI1} \network\admin directory & {oracle_common} \network\admin directory (only the first is necessary because it is the ORACLE_HOME)

  2. or instead of the source tnsnames.ora entry, use the full expanded tnsnames as shown below

  (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 172.16.66.173)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl)))

  Both of the above will work.

  For more information:

  Unable to connect to the database of the OBIEE 11g improved SPR

• Adobe Muse does not start when the Mac OS SIERRA

  Muse (latest version) Adobe no longer starts

  -It has nothing to do with the fact that I've updated my Mac Mac OS SIERRA (Beta)?

  -Photoshop (latest version) launches successfully.

  FALSE ALARM:

  With the update of June 20, 2016, Adobe Muse works 'perfectly' with MacOS Sierra (Beta 1). Thanks be to God.

• Windows does not start after the use of CD "" Toshiba Recovery and Applications/drivers ".

  Well my Toshiba Satellite A205-S5814 laptop was very slow and I was getting very frustrated with it, so I decided pop in the CD "Toshiba Applications/Drvers" perhaps to restore my laptop to factory settings and run perfect once again.

  As I was doing this operation and tried fixing it, the thing finished and off the laptop. And when I turned it back on, Windows will now start and give me the Windows Boot Manager screen. My laptop had Vista on it and I even tried to install Windows XP Home Edition on it with a disk I had. But whenever he's going to do, he says he can find t any hard drive? But for sure, there is a hard drive!

  I do not understand what has happened and why this Toshiba drive ruined my laptop. Before I used this drive my laptop has always works and works OK, it has been slow but still booted Vista and stuff ran. Can someone please help me or tell me what to do, I think that Toshiba has messed up my laptop with disc here, and I don't think that we should have to pay so he can get fixed.
  Please help me.

  Hello!

  I don t think that the Toshiba Recovery disk ruined your laptop.

  If I am right on the recovery disk is Vista and it was installed before. I think the installation going something wrong.
  When you get the Windows Boot Manager you can fix your computer? You can reinstall Vista without the recovery disk when you choose this option, then Toshiba product recovery.

  When you install Windows XP, you need a SATA driver. If you don t use one, you will get this error which can t find hard drives.
  You can download it on the Toshiba site and after booting from the XP CD, you must press F6 to load drivers from a floppy external drive or use you nLite to create a disc with drivers.

  Good bye

• Tecra M2 does not start - the power light AC blinking orange

  Someone at - it a list of codes for the Tecra M2 flash.
  My friend has a laptop that does not start at the top. the AC power LED flashes orange. a long, short, long, short, long, short, long, short.

  I checked the battery and reinstall the RAM.
  Any IDE?

  Hello

  I agree with go.
  The ASP would be able to tell what means error.

  Usually means short and 1 long: 0
  So the error must be: 1010 1010
  Due to the last significant bit (LSB), to be read by behind:
  So it now means: * 0101 0101 binary *-> it must be converted to hexadecimal-> * 55 Hex *.

  Then, you will get a hex code.
  But unfortunately, I m not very well which could mean this code

  So ask ASP for help!

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected