Tecra S5 - adapter to display cannot start - Code 10

Hello

I have a problem with my laptop (Tecra S5 series).
Every time when I start or restart my laptop, the screen moves too slowly, it has yellow bands and sometimes is flashing.
When I open the Device Manager I see the graphics card (NVIDIA Quadro NVS 130 M) with yellow circuit with a brand extension. When I go inside it is said: the device cannot start. Code 10.

Then I have to go Safe Mode, uninstall the drivers for NVIDIA Quadro NVS 130 M, reinstall and restart. I noticed that when this video adapter is OK, so I don't have problems with my laptop screen.

Can someone help me?

What operating system do you use?
I put t know since when you have this problem, but if this happens again and again I recommend you to install original OS that you got with your laptop. It contains the original, including the display driver drivers, and something like that should not happen.

Tags: Toshiba

Similar Questions

  • Microstoft ISATAP adapt: this device cannot start (code 10)

    I've had no internet access for a few weeks - a day that worked and then the next day no wi - fi or Ethernet connection. Someone on the MS Community suggested to install driver updates, but the laptop in question has no access to the internet and has been updated automatically anyway. Today, I tried to reinstall the drivers on the adapters wi - fi and broadband from the phone itself, which seemed successful. But when I got to the ISATAP Protocol would not do the same thing and it comes up with the error message in the title of this post.

    I read a few posts, which suggest to uninstall the adapter and then put it back, but as my laptop has no way to connect to internet, I don't see how it will work in my case. I don't seem to have the Win 7 CD either, unfortunately. So, where do I get a new adapter or update the driver, or whatever I need to do?

    Thank you

    IRB

    Hi Snarli,

    Thanks for posting the query on Microsoft Community.

    I understand that you are unable to connect to the internet and that he wants to know if you will be able to re - install ISATAP Adapter without an internet connection or not.

    I suggest you to run the troubleshooter and check if it helps.

    Hardware devices do not work or are not detected in Windows:

    https://support.Microsoft.com/en-us/mats/hardware_device_problems

    You will be able to install base drivers to restart the system after installation.

    If you have any other computer where you can download the driver and the copy to an external hard drive or USB key, you can go ahead and uninstall the driver and restart the computer. Is it does not automatically get installed, and then try to install it by using a USB key.

    You can consult the advice given by Vinod N replied on 26 April 2011.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/this-device-cannot-start-code-10-Microsoft-ISATAP/dc43be6f-466F-E011-8dfc-68b599b31bf5

    I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

  • Microsort Teredo Tunneling Adapter this device cannot start (Code 10)

    Help, please. Previous attempts have failed.

    Moved from feedback

    Thanks for the reply. Appears as a temporary solution for now. If you have problems in the future, please let us know.

  • Standard VGA graphics driver cannot start (code 10) on Vista Dell laptop

    VGA adapter work not or update,

    standard graphics driver vga adapter... cannot start (code 10) it says in the properties... it does not update or whatever it is, I have a computer dell laptop... Help, please

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Don't forget and log on as an ADMINISTRATOR

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    --------------------

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ----------------------------------------------------------------------------

    Check with Dell Support, their documentation online, and their forums.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

    Hello

    I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

    Askey WLL3070-D4 (MOW)
    Atheros AR5BRB-43

    I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

    Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

    I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

    I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

    Does anyone have a location for a pilot, etc.?

    Thank you

    Hello

    I always use this page for WLan driver update:
    http://APS.toshiba-tro.de/WLAN/

    It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

    Ciao

  • HP 8440p: Audio device high definition - device cannot start (Code 10)

    I'm having a problem of isolation an indication in device with high definition Audio Device Manager. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64-bit, but that made no difference.

    Device Manager indicates that "this device cannot start (Code 10)"

    Driver date 09/07/2015 / Version - 10.0.10240.16384 / Microsoft driver

    Details tab - value = device high definition Audio

    Tab events - (information)

    Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000\4 & 36c4990c & 0 & 0301 requires installation.

    Any guidance is appreciated.

    Hi @JS2045

    The audio device problem HD, what you see is the Intel HDMI audio device that needs a driver.

    I looked around for a driver W10 to the hardware ID you have published and fails.

    This device is necessary unless you want or need audio via the port display.

    The only suggestion I can offer would be to try the graphics driver Intel W7 laptop support and driver page, but install it... so that you target just the audio device problem...

    Download, but do not work with this graphics driver...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873 & swItemId = ob_127914_1 & swEnvOid = 4059

    Download and install this free utility for files.  64-bit is the second listed file.

    http://www.7-zip.org/

    After installing 7-zip, do a right-click on the graphic driver file you downloaded, and select 7 - zip in the list of items.

    Have 7-Zip extract of: and let it extract the driver for the name of the folder (sp64360).

    Go to Device Manager and click on the audio device problem Intel HD requiring the driver.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

    Make sure that the include subfolders is selected and see if the pilot goes like this.

    Then restart.

    If you explore the driver folder 7-zip created, and then open the DisplayAudio folder, you will find the setup information file that has the hardware ID you reported that supported by the driver.

    If this driver audio works on W10, I don't know.

    But if you want to give that a try, it would be a way to do it without messing with the real graphics driver.

  • Lite-On iHAS124-04 IT burner - DVD "device cannot start Code 10".

    Windows does not work with my DVD writer.  This is the third I've tried and I get the same error message in Device Manager.  "Device cannot start Code 10".  It shows the correct driver and BIOS recognized correctly as a SATA drive.

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • CD/dvd-rom device cannot start code 10

    I am unable to read the cd or dvd.  I can't copy or the other. Device Manager indicates this device cannot start code 10. Please help me find a solution.  Thank you.

    You can have a couple of damaged registry keys must be deleted.  We provide steps to remove the key using the registry editor, but you must be careful when editing the registry.  Please follow the steps in the link below for the backup of your registry before you open the registry editor.

    Backup of your Windows registry

    Note: Before using this method, uninstall all CD or DVD writing or recording of programs. Delete the corrupted registry entries could cause problems with another CD or DVD writing or recording of programs that are installed on your computer. Uninstall these programs before you start you will help avoid any problems that may remove registry entries. You can reinstall these programs once the problem is resolved.

    This method provides detailed instructions about how to use the registry editor to delete the following corrupt registry entries:

    • UpperFilters
    • LowerFilters

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    Step 1: Open the registry editor

    • Click the Start orb, type regedit in the Search box and press enter if you are prompted for an administrator password or a confirmation, type your password or click continue

      Step 2: Delete the UpperFilters registry entry

    1. Expand HKEY_LOCAL_MACHINE.
    2. Expand SYSTEM, and then expand CurrentControlSet.
    3. Expand the controland class.
    4. Under category, click on {4D36E965-E325-11CE-BFC1-08002BE10318}.
    5. In the details pane of the registry editor, on the right, click UpperFilters.

      Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters.

      • If you see the UpperFilters registry entry in the details pane of the registry editor, go to step 6.
      • If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to "step 3: delete the LowerFilters registry entry.»
    6. On the Edit menu, click on delete.
    7. Click Yes when you receive the following message is displayed:
      Are you sure you want to delete this value?

    The UpperFilters registry entry is removed. Step 3: Delete the LowerFilters registry entry

    1. In the details pane of the registry editor, on the right, click LowerFilters.

      Note that you can see a LowerFilters.bak registry entry. You don't have to delete this entry. Click LowerFilters.

    2. On the Edit menu, click delete.
    3. Click Yes when you receive the following message is displayed:
      Are you sure you want to delete this value?

      The LowerFilters registry entry is removed.

    4. Exit Registry Editor.

    Step 4: Restart your computer, restart your computer. After doing this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.  Please let us know if this does not solve your problem, or if you have any other questions.  Thank you.

    Shane
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 'Comfort Curve Keyboard 2000' cannot start (code 10)

    Hi, my laptop cannot detect my external keyboard. The keyboard is the 'Comfort Curve Keyboard 2000'. Laptop is an ACER ASPIRE 5738 G running Windows 7, 64-bit, the publishing house.

    When I plug in the keyboard, Windows says it can't find a driver for the device and if I manually select HID keyboard driver, Windows indicates that the device cannot start (code 10).

    I already tried to uninstall all USB devices and restart the system, but it did not work.

    Any suggestion?

    Hi Stefano,

    If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message.

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    Follow the steps to solve the problem of hardware in the computer:

    Method 1: Run the fixit to solve hardware problems:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: Check the boot to find that there is no conflict applications/programs:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup.

    Please contact the Microsoft Hardware support:

    http://www.Microsoft.com/hardware/en-IE/p/comfort-curve-keyboard-2000#support

    Let us know the result.

  • Portege Z830 - Infineon TPM device cannot start (code 10)

    Hello

    I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
    I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
    This device cannot start (code 10).

    I downloaded all the drivers from Toshiba, but it does not work.

    Any idea?

    Thank you.

    Hello

    The TPM is optional and not equipped Portege Z830-10F unit a module TPM.

    Welcome them

  • Satellite L300 - drive CD/DVGW cannot start (Code 39)

    Satellite L300 - CD/DVGW SD-L622A - device cannot start (Code 39)

    I have not really used the player for a while now, but it was working fine when I set up the laptop.
    Now, I recently noticed that when I go to my computer, it shows three years not DVD player. I went to properties and Device Manager and it says only: "device cannot start (Code 39).

    I have downloaded the driver and re-installed but still does not work.

    Help, please.

    Thank you

    Can you please tell me which driver you have reinstalled? AFAIK for optical disc drive there is no separate driver.

    In any case put code 39 as a search term in this forum and you will find the solution to this. ;)

  • Satellite L300 - CD/DVGW SD-L622A - device cannot start (Code 10)

    I n t really used the player for a while now, but it was working fine when I set up the laptop.
    Now, I recently noticed that when I go to my computer, it shows three years not DVD player. I went to properties and Device Manager and it says only: "device cannot start (Code 10)"

    I thought it could have been an update. I downloaded, but no idea.
    I restored in any case to a date earlier, but not had any luck, says always the same.
    I was wondering if if there is a way to restore only a specific part of the material to the way it was just after the first implementation, rather than restoring the entire computer and have to download and reinstall just like my printer and so on.

    Any help is appreciated, thanks

    Hello

    You can fix this by removing a high low filters in the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    But before you will need to remove these entries go to the Device Manager and remove the drive from the list of devices CD/DVD.
    Access to the registry, and then follow the above procedure.
    Finally, restart the laptop.

    That article should work it worked on my laptop too.

    Good bye

  • IDT high definition audio CODEC. Error: the device cannot start (code 10)

    Original title: IDT high definition audio CODEC

    My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

    Hello

    1. have you done any change in software on the computer lately?
    2. What is the brand and the model number of the sound card?

    Method 1.
    Follow the procedure step by step in the article below and check.
    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Method 2.
    If the problem persists, follow the steps listed in the article below and check.
    How to troubleshoot sound problems in Windows XP
    http://support.Microsoft.com/kb/307918
    Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
    I hope this helps.

    See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • AC 97 cannot start code.10

    keep get AC97 cannot start code.10. visited mr fixit. updated the driver. summer on the internet. uninstalled several times. been in the bios to check if all audio is enabled. reupdated pilot.  Maybe the problem is that it is an e machine from England. in all cases I have worked on this situation since I have this PC for about 2 months and still trying to find the right answer.

    Hello

    See the Microsoft articles below to work on the issue.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

  • Installation of driver with PXI-8360 error "this device cannot start - Code 10"

    While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

    Thank you

    Manu

    Sounds great Manu,

    I also followed on that for you, then you should be getting approval sometimes today.

    I hope for the best

Maybe you are looking for