Tecra S5 - Black display after starting windows XP

Similar Questions

• Latitude E7440 display goes black / white after "starting Windows."

  I suspect that he is an out-of-the-box issue (like the power button lights, either), but maybe I'm missing something... This particular unit fired upward, as planned and took our standard image. Somewhere along the way (probably during one of its reboots), I noticed that the screen is out. Turn down and the back didn't solve it, or don't have reset the BIOS. Dell diags run without problem and I can start Windows in Mode safe... but whenever I start Windows normally, it removes after "Starting Windows" flashes by.

  AARRGGHH! I'm kicking myself. It was something I discovered some time ago and since then I forgot... I had stacked them! I have closed an E7440, placed another on top of it and proceeded to the image of this second unit. At some point, I must have changed it so slightly... put it right above all that the devil is in the cover of the display of the unit of the first! (A magnetic field, is my guess). And "in white" is the second display unit... hit the light of the power button, and as a bonus. It worked as planned, when I moved this unit to another place, in order to tap into a flat HDMI. And it is blanked, as soon as I put back it on top of the first E7440. Mystery solved.

• Pavilion mini 300-010 in: no display after starting in safe mode

  Recently (2 weeks) bought the Pavilion Mini Office 300-010 and was well before decide me Flex my curiosity.

  the office is connected to my monitor VGA Samsung using the HDMI-VGA connector since the release of funds has no VGA or DVI - I usage options.

  the part where my curiosity killed the cat, was when I decided to start the winodws 8.1 in safe mode and see what happens.

  pressing F8 did not help that the load of the OS had no delay (or maybe it's the UEFI BIOS) and so I decided to put safe mode with "a minimum without network option 'using 'msconfig'." Performed a reboot assuming I see safemode and all I got is a black screen. Noticing that the driver for the conversion of the display cannot be loaded in safe mode and now I'm stuck because I do not have a p LCD monitor that plugs directly into.

  I checked the monitor VGA just in case, and it seems to work very well with my laptop. . Done reboot "N"-number of times and the result is the same. ".

  is there a way to get out of safe mode without actually doing a HDMI compatible monitor by just using the keyboard?

  Hello @LogicMantra,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your office is not able to display after starting in safe mode, and I'd be happy to help you in this case!

  To fix this, I recommend you to borrow an HDMI compatible monitor and update the drivers for your system this way. If this does not work, please follow this document on the computer starts up but screen remains blank (Windows 8).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

• Black screen after using Windows Memory Diagnostic

  Recently I have experienced problems with the system restore doesn't work don't not and although perhaps it was the file system and so I started Windows Memory Diagnostic and didn't know that you need to manually restart the computer and so I tried works again and again until what it finally hit me that I needed to restart it myself. He began to do his thing and I left a little to return to a black screen at 3:30 and it is now 23:00 and still nothing has changed. Don't know what to do and I don't want anything corrupt or damage my computer anyway. Is it normal for her and if not, how can I stop my computer safely?

  Hi Brendan,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest you use the steps in this article and check if it helps.

  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• After starting windows 7 Notepad opens titled GfxCUIServiceInstall

  After starting windows 7 Notepad opens a window titled GfxCUIServiceInstall. I had started this process by calling Microsoft. I realized soon that's a mistake. The Tech, I mentioned, began his response to my question to demean my question and my experience? He said, emphatically, that the problem was with the windows operating system itself, and it's my fault for buying a PC, in December of 2012, which had no 8 installed and always ran 7. That ended with her alone and unique solution - I needed to pay for remote access to my PC, to solve this problem, because I didn't have the know-how. So despite deep understanding of this Tech, I ran a search and retrieval system Mech program instead. I found a file called bootsqm.dat. But even once, I'm stuck, because I do not know what folder say file belongs to. This time, instead of having an experience to repeat, I chose to come here to ask the community instead. That experience has really left me a bitter taste to the Microsoft Customer Service. I hope that someone here can and would really help with this one. Thank you in advance.

  I found myself in the same situation just two days ago. I thought about her because I traced my actions for these last two days. It turns out that I put all *.vbs files to open Notepad (I did because I was plagued by virus heuristics *.vbs).  GfxCUIServiceInstall is a vbs script and it opens at startup. So if I put the vbs files to open in Notepad, gfxCUIServiceInstall opens at startup in a Notepad file everytime I open my computer. You just need to change the program that windows uses to open these files in "Microsoft Windows based script host" by using the "open with" command shell when you right click on the vbs files. It's a shame the customer service can not provide this kind of solution, not belittle you or convince you to pay him.

• Black screen after start - "Video_tdr_failure atikmpag.sys.

  Original title: black screen after startup

  A few days ago I accidentally dropped my laptop I was trying to pick it up. It froze and I used the power button to stop it. The next day, it worked very well, I played a game, but then the screen got all blurry and it froze again. Therefore, whenever I started it normally, I would get a blank screen. But in Safe Mode, it worked fine.

  I assumed it was my hard drive, I got a new and it seemed to work very well, I had reinstalled W7. Until I tried to install the updates and it the screen went white again. I used the system restore and got it to do work. Then decided to move to W10.

  After the upgrade, the pc restarted with a white screen, I have it connected to the TV with an hdmi cable while you try to start it, then the screen worked fine. He stayed very well until I tried to install the updates. It would not just start up. He gave to the page «Video_tdr_failure atikmpag.sys»

  I returned to Windows 7 and now it always starts with a blank screen.

  * the screen works very well throughout the boot process

  And works fine in Safe Mode *.

  Chances are, at least (if not more) there is now a default in the video circuits.

  Be aware, the laptops are very delicate animals.  This type of accident will most often mean end of system life.  The biggest problem is the cost of the repairs in such a situation.  The pieces are almost all owners - read overvalued.  Repairs made by technicians who are not deeply experienced in the setting of your particular brand/model are often insufficiently.  Which leads you onto the OEM repair service that is overvalued.

  The result is that once a laptop is spent on the brand of 3 years, repair of such a system in such circumstances: the replacement more often.

  Well consider a desktop computer type for a replacement.  They are cheaper to begin with, usually more powerful - sometimes by a factor of 2, are easily repairable using components of off - the shelf that are commonly available and one made by several competitors.   Desktop computers usually hold up well almost two times longer.  From an ergonomic point of view, laptops are considered experts machines of 20 minutes.  Use of meaning beyond that time can be bad for your health.

• Tecra A3x hangs at "Setup starts windows" during the XP installation

  Hi again
  I posted another thread on this laptop. This question was cured by adjusting the correct CPU.

  So, now everything seems fine. Everything seems to work except very well.
  During the installation of XP, the drivers all will charge them and then we get the text 'Setup starts windows' the lower left of the screen.
  It does not further, just sitting there.

  I googled this problem and read many old threads on the subject, I went to the Microsoft website too.
  So far I tried (on the basis of these old threads)

  Different installation discs
  Different memory
  Disable (in bios) that anything not reqd such as Lan
  Reset the default bios settings
  You press F5 when invited to press F6 for scsi drivers. From there, I tried different setting options.

  The current bios is 1.30, I understand there is a update available for 1.4 but it is a basic installation Win rather than back may be done without THAT installed XP.

  Suggestions for what the problem maybe?

  Hello

  What version of Win XP you try? Win XP contains the SP3?
  Please include to the Win XP SP3 using a tool called nLite and then try to reinstall Win XP.

  AFAIK the Tecra A3x support a common IDE HDD so no driver RAID or SATA is necessary.

  You can also check the HDD of the Tecra.
  Use the tool called Drive Fitness Test to test the HARD drive

  Good luck

• A few minutes after starting windows, the laptop crashes

  I use a Toshiba laptop model: ppm81e, with windows Vista professional.
  Last night it was working fine, but when I woke up this morning, I found that the notebook is turned off. Apparently, for three hours, there was no electricity in our region and which caused the closing down.

  When I turn on the laptop, all load pretty normal as before. However, 4 to 7 minutes after the start, computer crashes laptop all at once. I can't disconnect, I can't restart, I can not load the Task Manager, and same taskbar are locked. At the beginning of the process hangs, I can switch between the windows using Alt + Tab but it is useless and will not help anything...

  I tried to use system restore, but unfortunately it says there is no restore point previous (I guess it is disabled).
  So I tried to use the repair using Recovery DVD that I did the first time I turned on the laptop.

  So, I inserted the recovery disc 1 DVD and boot from the DVD.
  Now he's stuck in a scene where says:
  ' Waiting for ODD vacancies...
  STRANGE drive f: loan.
  Check for support in the F: drive... »

  And it is about 30 to 40 minutes, that's all there is...

  Here is the screenshot:
  Screenshot 1
  Screenshot 2

  I don't know why the laptop is suspended without no reason that I can think of and I don't know how to get out of this mess, especially when my last shot (DVD release) adds another problem to the equation, instead of solving a.

  Please guide me.

  Hi Jean did.

  I suggest that you contact Toshiba support for help with the recovery process.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  If you are able to solve the problem of recovery process and the laptop still crashes at startup, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Black screen after the Windows Logo

  I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

  I use windows 7 ultimate 32 bit with the latest drivers & updates

  Hello

  What is the code of Bug_Check of BSOD?

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a black screen after start up, but the mouse behaves normally. What's wrong?

  Hi, today I turned on my Pavilion DV9500t off for an hour. It would normally start Windows 7 64-bit (the Welcome screen was during more than usual), but instead of going to my office, the screen went black with the cursor has normally and only flashes do not. No keyboard function works well.

  I started from the install disc and from there I fixed start-up (no problem found) and restored to the previous points several times without success.

  There is no error message and I have not noticed a strange behaviour, with a view to this. Any suggestions as to the cause and the cure are greatly appreciated.

  I suggest you reboot your device and pressing F10 to enter the BIOS. While in the BIOS, I ran the disk hard self test in the diagnostics tab and see what the results are.

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After starting Windows Vista Recovery dvd 64-bit, the files are loaded on my laptop, however after the loading screen are replaced by a black screen and the white slider.

  Hi all

  I have my laptop startup problems, and after you use the Windows Vista Recovery dvd(64 bit), I get a black screen with a white cursor. If I try to start the system in safe mode, I get an error message "windows/system32/ntoskrnl.exe is missing or damaged. Because I can't run the recovery dvd, I'm a bit stuck. Any suggestions?

  Evan

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• E5 - 511 black screen after installing Windows 10

  Hi, not sure I can ask a question here already?

  Well, this: I improved my longs E5-511 Windows 8.1 for Windows 10. After a cold start, it appears a black screen, until I have press the power button until it stops. Start again, it's OK, although slow. I found discussions on this matter by Google, it seems men to the Intel HD Graphics driver. According to Device Manager, I later. There is a 64-bit device driver Windows 10 on the Intel web site that looks much newer, but it refuses to install it.

  Any ideas?

  You can try the drivers on the website of acer for your model:

  http://us.Acer.com/AC/en/us/content/drivers

  If this does not work, you can download and use the Intel driver update utility.  The best thing to try first the driver from the Acer site.

• Pavilion dm4 1041tx: black screen after the windows logo

  My laptop screen has frozen while watching a video then after restarting it displays black screen but I can connect to windows using the laptop and fingerprint reader can be closed by windows by pressing and then alt + f4, then alt + f4, then enter. Works in safe mode. Disable the ati graphics card did not work. Same execution of recovery did not work.
  Hard drive test results:
  Smart check: past
  DST short: PAST
  Long DST: PAST
  Help, please...

  Hi @vikash4309 ,

  At this point I agree with the tech that look at the computer I think it's a problem with the hard drive or even the system board. They may give falsely on the test results. I would recommend that you take it back to this HP's Service Center.

  If you do not replace the hard drive recovery CDs should work as long as replace you it with another hard drive and not an SSD because they are different and the recovery CD will know how to properly partition the drive.