Tecra S5 - FN and sound keys do not work

Similar Questions

• Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

  Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

  Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• I don't know how i ' v, but I lost the toolbars at the top and bottom. [Alt] will not bring up the toolbar and scroll keys do not work. How can I fix it?

  I managed to hide the toolbars, ALL of them. [Alt] brings to the top of the toolbar so that I can change them. In addition, the [previous page] [next page], [home] and [end] keys do not work.

  You can have:

  1. Choose the Mode "full screen" or
  2. unchecked toolbars

  The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

  • See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

  • Right-click in the empty space at the end of the tab bar
  • Press the ALT key or the F10, the poster Menu bar, click View > toolbars
  • Firefox button > Options
  • Hold down the ALT key and type the letters of the keyboard V T
  • See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
  • Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
  • Also see-> http://kb.mozillazine.org/Toolbar_customization

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Page up, page down, home and end keys do not work.

  Page up, page down, home and end keys do not work.

  There is a fix that has worked for others in https://bugzilla.mozilla.org/show_bug.cgi?id=640587
  This problem addressed in Firefox 9 which was distressing for most owners of Asus.

• I have laptop HP Envy M6 Tx 1216 and brightness keys do not work.

  I have laptop HP Envy M6 Tx 1216 and brightness keys do not work.

  Hello

  Try to use Recovery Manager to reinstall your graphics driver of origin AMD - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• How can I install CS5 on a replacement/new laptop? I paid full price in 2011 and the key (and it appears in my Adobe account under products), but it was a downloaded product and I can't find a download of this online version and my key does not work

  How can I install CS5 on a replacement/new laptop? I paid full price in 2011 and the key (and it appears in my Adobe account under products), but it was a downloaded product and I can't find a download of this online version and my key does not work in CC.

  Your key does not work in CC, this is a newer version and would require a new purchase.

  Downlaod CS5 here.

  Download the CS5 products

• After installing new FN and multimedia keys do not work on Qosmio F20

  Hello, my friend buy Qosmio F20 of the Germany, but it comes with Windows Xp with the German language on this subject. I format the hard drive and install Windows Xp Professional SP2. I download all of the drivers who was very available and most of the functions work (like display, sound, touchpad and others), but the multimedia keys and the FN keys do not work (remote work). The other problem is that I can't install the TV tuner.

  With German Windows XP, I try TV tuner but have no SOUND what is the problem? When I try to install the utility software under display appear message that says "Unable to get the information from the BIOS" or something comparable. I have install all the drivers that I found in the Qosmio F20 support page but I have video control with exclamation mark in Device Manager.

  Can you help me?

  Where am I wrong? What should I do?

  First of all he must know that if you are going to install together the Toshiba drivers after installing the OS to do in the right order!
  On the Toshiba driver page, you will find the Installation Instructions. You will need to follow the guide line! It is important to properly work all the functions!

  In addition, you will need to select the right OS. There are two: XP and XP MCE.

  To control buttons Toshiba works correctly, you will need to install the controls.
  But as I said above: follow the instructions in the insulation.

  A few words on the TV tuner:
  As far as I know, you can only use the TV tuner in the country where the laptop was purchased because different PAN and NTSC settings.
  In addition, the TV tuner driver offers TV tuning and recording capabilities using Media Center on your computer. If you have any MCE so I put t know how you want to watch TV.

• Satellite C50 - B - 11 d - keyboard and NHY keys do not work

  Hi N H key and there do not work on the keyboard, sometimes also the arrow keys does not work.
  any advise? or search and return? It s not even ages of two months and has this problem since day 1.
  Not only still used little. Very disappointing quality...

  SATELLITE C50 - B - 11 D

  >... and has this problem since the day 1
  Why wait so long? Where this problem occurs from the beginning, it is always possible to return the laptop to your local dealer and ask for replacement.

  Anyway, do last and final test. Reinstall the original recovery image and check if the problem persists. If so I think you should contact the closest service Toshiba and ask for help. Your laptop is new and its warranty valid, they will help you.

  Maybe new update BIOS, if available, may help, but first try to clarify this issue with the technicians.

• Mouse and multimedia keys does not work without the fn key

  Lenovo G500

  model without 20236

  Windows 7 sp1

  the mouse and the multimedia keys does not work without the fn key. Help, please

  [Original title: Lenovo g 500]

  Hello

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/ I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Numeric keypad and function keys do not work as expected.

  Keypad does not work as expected. By pressing 0 on the numeric keypad displays a "right click" menu, and the NUMLOCK is on. All other elements of the keypad work as expected.

  Function keys do not act as expected in MS Excel 2010 (e.g., F2 changes the brightness compared to modify a cell).
  With the help of Samsung model NP350VC-A01CA with Windows 8 and Office 2010.
  What I did to try to resolve:
  (1) disabled options control access Panel\Ease of Access\Ease Center\Make the keyboard easier to use (all of the checkboxes are turned off). and
  (2) uninstalled and reinstalled the keyboard driver; and
  (3) update regedit - Computer\HKEY_USERS\. Default\Control Panel\Keyboard\InitialKeyboardIndicators 2
  When the computer "wakes up" or after a reboot, it resets...
  A very frustrated user would love some help!

  Keypad does not work as expected. By pressing 0 on the numeric keypad displays a "right click" menu, and the NUMLOCK is on. All other elements of the keypad work as expected.

  Function keys do not act as expected in MS Excel 2010 (e.g., F2 changes the brightness compared to modify a cell).

  With the help of Samsung model NP350VC-A01CA with Windows 8 and Office 2010.

  When the computer "wakes up" or after a reboot, it resets...

  Ask Samsung?   Sounds like a BIOS option.   Otherwise use the Fn key as needed.

  ---

• Volume and Mute keys do not work

  The volume keys and mute on my Pavilion dv5 do not work.  I am able to control the volume and mute video tracks via the visualization of software functions.

  Thank you.  This solves the problem.

• Qosmio X 500-mode 'sleep' and function keys will not work

  Hello guys!

  I have two problems with my X 500. First of all, sleep mode does not work correctly. In fact, it does not at all. When I try to put the laptop into sleep mode, it simply stops, even if it seems as if it was in sleep mode. The problem occurred recently, and I had not installed updates from the driver or just anti-virus software before. The hibernation mode works very well.

  The second problem is that some of the function keys do not (red below the power button). Namely the eco mode button, the mute button and multimedia button. This problem occurred a long time ago, and it is also likely to be due to any software installed. The other keys work fine.

  Please, help me to solve these questions, if you know how. Thank you!

  Hey Buddy,

  How are you trying to access the bar in view? For example, you can access the standby mode if you press the FN + F3 key combination.

  In addition, follow the instructions posted by Akuma. Try to reinstall the package of added value and a system restore if you have installed additional software to check what software is causing this problem.

• H and G keys do not work

  I bought a HP TM2 1050 EF. I had a problem with the H and G keys that do not respond when I type on the keyboard. I only have them appear with the keypad. I need your help to cope.
  Thank you!

  The Tm2 series is launches a new... Your device must therefore guarantee... I suggest you contact HP support for help...

• Select multiple channels for a single task - control and shift keys do not work

  Hello

  Following the advice of several other positions, I try to choose several physical channels in the drop-down list so that I can then use the function "unflatten channel channel" later. It seems that if I hold this key is pressed or cntrl, I should be able to select multiple channels in the list, however, this does not work for me. I tried to go in the "navigation key" property for the control channel to task, but there not all listed associations. Someone else has encountered this and found a solution?  I previously around that by declaring several channels by a colon (for example, ai1:3), but it does not work for the unflatten function.

  Thank you

  Claire.

  If I understand correctly, I think that you need to do is use a task property DAQmx. Try to use the channels property to get an array of strings.

• control, function and shift keys do not work

  I have a laptop computer VPCEA25FG of the series e. I recently formatted the pc using the sony built option. everything now works fine expect my shift keys, fn and control do not work properly. When I press these keys, they give random entries. No etc num lock is on... all the keys to toggle etc are switched off... i even tried to update the driver, but it still does not work. any help

  samkam,

  Since you already have a factory recovery I don't think it's a software problem.  The issue could be with the keyboard itself or the motherboard where the keyboard controller is defective...